


| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Catatan | If not specified, the ambient temperature for measurement is +20℃+68℉. |
| Berat | New weight : 790 g approx. |
| Butiran | Low-volume fan type |
| Produk | Fan Type Ionizer |
| Bahan | Enclosure : ABS, Louver : ABS, Discharge needle unit : PBT, Discharge needle : Tungsten, Bracket : SPHC |
| Petunjuk | Discharge error (Red), Fan error (Red), Power (Green), Discharge (Green) |
| Aksesori | Straight louver : 1 pc. (Note), Angle louver : 1 pc., Caution label : 1 set, Rubber cushion : 1 pc.(Note): The discharge needle unit is loaded on the straight louver before shipment. |
| Keseimbangan ion | ±10 V or less(Note): Typical value at 300 mm11.811infrom directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
| Nombor Bahagian | ER-F12SA |
| Nama produk | Fan Type Ionizer ER-F |
| Fungsi utama | Error output, Discharge halt input |
| Nombor Produk | ER-F12SA |
| Voltan bekalan | 24 V DC ±10% |
| Kelembapan ambien | 35% RH to 65% RH (No dew condensation allowed),Storage : 35% RH to 65% RH |
| Kaedah pelepasan | High-frequency AC method |
| Kaedah pembumian | C (capacitor) grounding |
| Penjanaan ozon | 0.04 ppm or less(Note): Typical value at 200 mm7.874infrom directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
| Suhu ambien | 0℃ to +50℃+32℉ to +122℉(No dew condensation allowed),Storage : -10℃ to +65℃+14℉ to +149℉ |
| Masa penyingkiran cas | 1.5 sec. approx.(±1,000 V → ±100 V)(Note): Typical value at 200 mm7.874infrom directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
| Penggunaan semasa | 400 mA or less |
| Peraturan yang berkenaan | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Voltan keluaran pelepasan | ± 2 kV approx. |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi