


| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Berat | Main unit: 790 g approx. |
| Butiran | Low-volume fan type |
| Produk | Fan Type Ionizer |
| Bahan | Enclosure: ABS, Louver: ABS, Discharge needle unit: PBT, Discharge needle: Tungsten, Bracket: SPHC |
| Petunjuk | Discharge error (Red), Fan error (Red), Power (Green), Discharge (Green) |
| Aksesori | Straight louver: 1 pc. (Note), Angle louver: 1 pc., Caution label: 1 set, Rubber cushion: 1 pc.(Note) The discharge needle unit is loaded on the straight louver before shipment. |
| Keseimbangan ion | plus or minus10 V or less(Note) Typical value at 300 mm 11.811 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
| Nombor Bahagian | ER-F12S |
| Nama produk | Fan Type Ionizer ER-F |
| Fungsi utama | Error output, Discharge halt input |
| Kelajuan kipas maksimum | 4.0 m/s(Note) Typical value at 300 mm 11.811 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
| Nombor Produk | ER-F12S |
| Voltan bekalan | 24 V DC plus or minus10% |
| Isipadu kipas maksimum | 2.50 m3/min |
| Kelembapan ambien | 35 to 65% RH (No dew condensation) , Storage: 35 to 65% RH |
| Kaedah pelepasan | High-frequency AC method |
| Kaedah pembumian | C (capacitor) grounding |
| Penjanaan ozon | 0.04 ppm or less(Note) Typical value at 200 mm 7.874 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
| Suhu ambien | 0 to +50degrees +32 to +122degrees Fahrenheit (No dew condensation) , Storage: –10 to +65degrees +14 to +149degrees Fahrenheit |
| Masa penyingkiran cas | 1.5 sec. approx. (plus or minus1,000 V to plus or minus100 V)(Note) Typical value at 200 mm 7.874 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
| Penggunaan semasa | 400 mA or less |
| Voltan keluaran pelepasan | plus or minus 2 kV approx. |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi