


| Parameter | Nilai |
|---|---|
| Tahan (Spesifikasi) | Sample hold, peak hold, bottom hold, peak-to-peak hold, average hold, delay hold |
| Item (Spesifikasi) | ZX-GIF11/-GIF11A |
| Lain-lain (Spesifikasi) | Measurement cycle setting, threshold setting, hysteresis setting, initialization, key lock |
| Bahan (Spesifikasi) | Case: PBT (polybutylene terephthalate), cover: Polycarbonate |
| Petunjuk (Spesifikasi) | Power ON (green), controller communications (orange), controller communications error (red), RS-232C communications (orange),RS-232C communications error (red), binary output (orange) |
| Lineariti (Spesifikasi) | ±0.1% F.S.2 |
| Rupa (Spesifikasi) | Separate type |
| Resolusi (Spesifikasi) | 10 µm (number of process values to average: 16)3 |
| Aksesori (Spesifikasi) | ZX-GIF_1A: Setup coftware (CD-ROM), 2 clamps, instruction sheetZX-GIF_1: 2 clamps, instruction sheet |
| Pengiraan (Spesifikasi) | 2 possible on up to two controllers (calculation Unit ZX-CAL2 is required for connecting controllers to each other.) A-B, A+B, width |
| Jenis output (Spesifikasi) | NPN |
| Panjang kabel (Spesifikasi) | RS-232C 0.5 m, binary output 2 m |
| Sumber cahaya (Spesifikasi) | Visible semiconductor laser diode (wavelength 650 nm, CLASS 1 of EN60825-1/IEC60825-1, CLASS of FDA(21CFR 1040.10 and 1040.11) |
| Output analog8 (Spesifikasi) | For current output: 4 to 20 mA/F.S., max. load resistance 300ΩFor voltage output: ±4 V, (±5 V, 1 to 5 V9), output impedance 100Ω |
| Fungsi utama (Spesifikasi) | Number of registeredsetups |
| Lebar pengukur (Spesifikasi) | 28 mm |
| Fungsi pemasa (Spesifikasi) | ON-delay, OFF-delay, one-shot |
| (Spesifikasi & maklumat pesanan) | Order code |
| Kelembapan ambien (Spesifikasi) | Operating and storage: 35% to 85% (with no condensation) |
| Mod pengukuran (Spesifikasi) | Interrupted beam width measurement, incident beam width measurement, outer diameter measurement, center position measurement, IC lead pitch,IC lead width judgment, specified edge measurement, wire position measurement, glass edge position measurement |
| Jarak pengesanan (Spesifikasi) | 0 to 500 mm |
| DC (Spesifikasi & maklumat pesanan) | NPN |
| Kitaran pengukuran6 (Spesifikasi) | 1.5 ms (standard mode (NORM))0.5 ms (high-speed mode (FAST))7 |
| Sampel kepada purata (Spesifikasi) | 1/2/4/8/16/32/64/128/256/512/1024/2048/4096 |
| 1 m (Spesifikasi & maklumat pesanan) | 1 m |
| 2 m (Spesifikasi & maklumat pesanan) | ZX-XGC2A |
| 5 m (Spesifikasi & maklumat pesanan) | ZX-XGC5A |
| 8 m (Spesifikasi & maklumat pesanan) | ZX-XGC8A |
| Suhu ambien (Spesifikasi) | Operating: 0 to 50°C, storage: -15 to 60°C (with no icing or condensation) |
| Port komunikasi (Spesifikasi) | RS-232C (9-pin D-sub connector) |
| Penggunaan semasa (Spesifikasi) | 150 mA max. (including receiver) |
| Kekuatan dielektrik (Spesifikasi) | 1,000 VAC, 50/60 Hz for 1 min |
| NPN (Spesifikasi & maklumat pesanan) | ZX-GIF11A |
| PNP (Spesifikasi & maklumat pesanan) | ZX-GIF41 |
| 20 m (Spesifikasi & maklumat pesanan) | ZX-XGC20A |
| Fungsi pelarasan (Spesifikasi) | Optical axis adjust mode/light intensityt writing mode, variable binary level, variable edge filter, analog output scaling |
| Tahap perlindungan (Spesifikasi) | IEC60529 IP20 |
| Penunjuk (penerima) (Spesifikasi) | Optical axis setting indicator (green) |
| Penunjuk (pemancar) (Spesifikasi) | Laser ON indicator (green), laser alarm indicator (red) |
| Nama (Spesifikasi & maklumat pesanan) | Order code |
| Voltan bekalan kuasa (Spesifikasi) | Supplied from controller (power consumption: 60 mA max.) |
| Jenis (Spesifikasi & maklumat pesanan) | Optical system |
| Fungsi tetapan semula sifar (Spesifikasi) | Offset setting of zero reset value, zero reset value memory |
| Pengawal yang serasi (Spesifikasi) | ZX-GTC11 |
| Rintangan penebat (Spesifikasi) | 20 MΩ(at 500 VDC megger) |
| Berat (keadaan yang dibungkus) (Spesifikasi) | ZX-GIF_1A: Approx. 550 gZX-GIF_1: Approx. 330 g |
| Objek penderiaan minimum (Spesifikasi) | 0.5 mm dia.1 |
| Paparan semasa pengukuran (Spesifikasi) | Measured value, resolution, threshold, voltage output value, current output value (number of display digits can be changed) |
| Input/input penyegerakan Laser OFF (Spesifikasi) | ON: Short-circuited with 0 V or 1.5 V max.OFF: Open (leakage current: 0.1 mA max.) |
| Ciri suhu (Spesifikasi) | ±0.005% F.S./°C |
| Jenis output (Spesifikasi & maklumat pesanan) | Order code |
| Penggunaan kuasa (pemancar) (Spesifikasi) | 30 mA max. |
| Panjang kabel (Spesifikasi & maklumat pesanan) | Quantity |
| Bekalan kuasa (Spesifikasi & maklumat pesanan) | Output type |
| Jenis berasingan (Spesifikasi & maklumat pesanan) | Through-beam |
| Voltan bekalan kuasa (pemancar) (Spesifikasi) | 24 VDC+10%, -15% ripple (p-p) 10% max. |
| Kabel standard (Spesifikasi & maklumat pesanan) | Flexible cable |
| Jenis bersepadu (Spesifikasi & maklumat pesanan) | 40 mm |
| Unit pengiraan (Spesifikasi & maklumat pesanan) | ZX-CAL2 |
| Output penggera kemerosotan laser (Spesifikasi) | NPN open-collector output30 VDC 20 mA max.Residual voltage 1.2 V max. |
| Monitor pintar GT (Spesifikasi & maklumat pesanan) | ZX-GSW11 |
| Rintangan getaran (ketahanan) (Spesifikasi) | 10 to 150 Hz single-amplitude: 0.75 mm for 80 min each in X, Y and Z directions |
| Output binari 12-bit (D11 hingga D0, GATE) (Spesifikasi) | NPN open-collector output30 VDC 20 mA max.Residual voltage 1.2 V max. |
| Pencahayaan ambien operasi (pemancar) (Spesifikasi) | 3,000 lx (incandescent light) |
| Pencahayaan ambien operasi (penerima) (Spesifikasi) | 1,000 lx (incandescent light)5 |
| TINGGI/LULUS/RENDAH Output penghakiman10 Output penyegerakan11 (Spesifikasi) | NPN open-collector output30 VDC 50 mA max.Residual voltage 1.2 V max. |
| Input pemasaan, input pensuisan bank, input tetapan semula sifar, input tetapan semula (Spesifikasi) | ON: short-circuited with 0 V or 1.5 V max.OFF: Open (leakage current: 0.1 mA max.) |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi