Dalam Stok Produk Hangat
WMS 9,5 (30X16)RL
WMS 9,5 (30X16)RL 0804267 PHOENIX CONTACT Shrink sleeve
$0.00USD
4159 dalam stok
Spesifikasi Utama
:DIN EN 62208 (VDE 0660-511):2012-06 (in parts)
Jenis:Shrink sleeve
Warna:white (RAL 9010)
Lebar:16 mm
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| DIN EN 62208 (VDE 0660-511):2012-06 (in parts) | |
| Jenis | Shrink sleeve |
| Warna | white (RAL 9010) |
| Lebar | 16 mm |
| Kitaran | 2 |
| Panjang | 30 mm |
| Keputusan | Test passed |
| IRM 901 | Test passed |
| IRM 902 | Test passed |
| Bahan | Polyolefine |
| Komponen | halogen-free |
| Jangka hayat | 5 years |
| Kadar pengecutan | 3:1 |
| Jenis produk | Shrink sleeve |
| Keperluan | ≥ 5 N |
| Tahap iklim | AHT 1.0 S |
| Jenis pemasangan | slide-on |
| Spesifikasi | DIN EN ISO 1518-1:2019-10 (following) |
| Tempoh ujian | 96 h |
| Patuh RoHS | yes |
| Rintangan lap | DIN EN 61010-1 (VDE 0411-1) |
| Semakan artikel | 01 |
| Diameter luar | 3.2 mm ... 9.5 mm |
| Lebar medan teks | 30.00 mm |
| Ketinggian medan teks | 16.00 mm |
| Mengecutkan suhu | > 85 °C |
| Nota mengenai permohonan | For the THERMOMARK ROLL, THERMOMARK ROLL 2.0, THERMOMARK ROLLMASTER 300/600, and THERMOMARK E.300 (D)/E.600 (D) roll printers, this material can only be processed outside of the printer using the integrated material dispenser pack. |
| Maklumat bahan | The specified minimum wire diameter of the shrink sleeve refers to its use as a marking material and does not guarantee any insulation characteristics once shrunk.Depending on the processed material batch, as well as the storage and processing conditions, the maximum insertable wire diameter may be reduced. |
| Bahan elemen asas | polyolefine |
| Diameter kabel luaran | 3.2 mm ... 9.5 mm |
| Teknologi pengenalan | Thermal transfer for rolls |
| Diesel[No. CAS 68476-34-6] | Test passed |
| Isopropil [No. CAS 67-63-0] | Test passed |
| Penilaian 125 °C (150 °C) | Test passed |
| n-Heksana [No. CAS 110-54-3] | Test passed |
| Bilangan label individu | 2000 |
| Keadaan penyimpanan yang disyorkan | 23 °C/50 % relative humidity. Storage in a dry and dark place in the original packaging is recommended. |
| Suhu ambien (operasi) | -55 °C ... 125 °C |
| Aseton (99%) [No. CAS 67-64-1] | Test passed |
| Etanol (99%) [No. CAS 64-17-5] | Test passed |
| Bilangan label individu setiap baris | 2 |
| Kelembapan yang disyorkan (penyimpanan/pengangkutan) | 50 % |
| Air + Petroleum eter [CAS No. 64742-82-1] | Test passed |
| Natrium hidroksida 0.1 mol/l [No. CAS 1310-73-2] | Test passed |
| Suhu ambien yang disyorkan (penyimpanan/pengangkutan) | 23 °C |
Penerangan Produk
Heat-shrink tubing, Roll, white, unlabeled, labelable with: THERMOMARKE.300 (D)/600 (D), THERMOMARK ROLLMASTER 300/600, THERMOMARK ROLL X1, THERMOMARK ROLL, THERMOMARK ROLL 2.0, THERMOMARK W, THERMOMA
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
