Dalam Stok Produk Hangat
UST4A1J1V
UST4A1J1V ST4-A1-J1V PANASONIC Safety, Thu-beam sensor, 15m, emission adjuster, cable 1m
$0.00USD
4335 dalam stok
Spesifikasi Utama
Barang:Specifications
Kabel:Shielded cable with connector, 1 m3.281 ftlong
Butiran:Sensor head
Produk:Compact Type 4 Safety Beam Sensor
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Kabel | Shielded cable with connector, 1 m3.281 ftlong |
| Butiran | Sensor head |
| Produk | Compact Type 4 Safety Beam Sensor |
| Bahan | Enclosure: PBT (Polybutylene terephthalate)Lens: AcrylicIndicator cover: Acrylic |
| Nombor Bahagian | ST4-A1-J1V |
| Nama produk | Compact Type 4 Safety Beam Sensor ST4 |
| Voltan kuasa | Supplied from controller |
| Nombor Produk | ST4-A1-J1V |
| Objek pengesan | φ9 mmφ0.354 inor more opaque object |
| Sambungan kabel | Extention up to total 50 m164.042 ftis possible for both emitter and receiver with exclusive cable. |
| Julat operasi | 0.1 to 15 m0.328 to 49.213 ft(Note：The operating range is the possible setting distance between the emitter and the receiver. It can detect sensing object of less than 0.1 m 0.328 ft away.) |
| Unsur pemancar | Infrared LED (Peak emission wavelength: 870 nm0.034 mil) |
| Pencahayaan ambien | Incandescent lamp: 3,500 Lx or less at the light-receiving face |
| Penggunaan semasa | Emitter: 11 mA or lessReceiver: 9 mA or less |
| Piawaian yang berkenaan | IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1:2015 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 3 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 3 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)(Note) Complies with those standards only when the sensor head is used in combination with the controller ST4-C11 / ST4-C12EX. |
| Penunjuk pancaran pancaran | Green LED (lights up during beam emission, lights off during emission halt) |
| Sudut apertur berkesan | plus or minus 2.5degrees or less for operating range exceeding 3 m 9.843 ft (required by IEC 61496-2 / UL 61496-2) |
| Penunjuk gangguan pancaran | Red LED (lights up when the beam is interrupted or lock out, lights off during reception)(Note) Shows light interruption information between the emitter and the receiver with the same address. It does not show OSSD output. |
| Penunjuk pancaran tuju yang stabil | Green LED (lights up under stable light received condition, lights off under unstable light received condition) |
| Pematuhan arahan penandaan CE | Machinery Directive, EMC Directive, RoHS Directive |
| Berat (Jumlah pemancar dan penerima) | Net weight: 100 g approx.Gross weight: 140 g approx. |
| Rintangan alam sekitar: Kelembapan ambien | 30 to 85 % RH, Storage: 30 to 95 % RH |
| Rintangan alam sekitar: Rintangan kejutan | 300 m/s2acceleration in X, Y and Z directions three times each |
| Rintangan alam sekitar: Suhu ambien | －10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: －25 to +70 ℃－13 to +158℉ |
| Rintangan alam sekitar: Tahap perlindungan | IP67 (IEC) |
| Rintangan alam sekitar: Rintangan getaran | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 90 m/s2 in X, Y and Z directions for two hours each< |
| Rintangan alam sekitar: Rintangan penebat | 20 MOhm or more with 500V DC megger between all supply terminals connected together and enclosure |
| Rintangan alam sekitar: Ketahanan voltan | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Penerangan Produk
Category 4 safety barrier sensor head, independent beams, IP67, 0.1 to 15m, built-in 1m cable, sensitivity adjustment
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
