Dalam Stok Produk Hangat
USGB1MBG5
USGB1MBG5 SG-B1-MB-G5 PANASONIC Safety door switch (Ultra-slim) with solenoid interlock, Magnet lock, 5m cab..
$0.00USD
4412 dalam stok
Spesifikasi Utama
:Ue
DC:Resistive load (DC-12)
Yaitu:Main circuit, look monitor circuit
B10D:2,000,000(ISO 13849-1 Annex C Table C.1)
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Ue | |
| DC | Resistive load (DC-12) |
| Yaitu | Main circuit, look monitor circuit |
| B10D | 2,000,000(ISO 13849-1 Annex C Table C.1) |
| Barang | Specifications |
| Kabel | UL style 2464, No.22 AWG 12-core |
| Berat | Approx. 600 g |
| Butiran | Magnet lock type |
| Produk | Ultra-slim Safety door switch with solenoid interlock |
| Bahan | Enclosure : PA66 |
| Perlindungan | IP 67 (IEC 60529) |
| Nombor Bahagian | SG-B1-MB-G5 |
| Panjang kabel | 5m16.404 ft |
| Nama produk | Ultra-slim Safety door switch with solenoid interlock SG-B1 |
| Kenalan utama | 1NC + 1NC |
| Nombor Produk | SG-B1-MB-G5 |
| Daya saling kunci | 500 N min. (GS-ET-19)(Note): The actuator locking strength is rated at 500 N of static load. Do not apply a load higher than the rated value.Do not apply a load higher than the rated value.When a higher load is expected to work on the actuator, provide an additional system consisting of another safety switch without lock (such as the SG-A1 safety switch) or a sensor to detect door opening and stop the machine. |
| Rintangan kejutan | Malfunction : 100 m/s2, Destruction : 1,000 m/s2 |
| Rintangan sentuhan | 300 mΩ max. (initial value, 1 m3.281 ftcable)700 mΩ max. (initial value, 5 m16.404 ftcable) |
| Kekerapan operasi | 900 operations/hour |
| Piawaian yang berkenaan | EN 60947-5-1, GS-ET-19 |
| Daya pembukaan langsung | 60 N min. |
| Litar pemantau pintu | AC |
| Rintangan getaran | Malfunction : 10 to 55 Hz, half amplitude 0.35 mm0.014 inDestruction : 30 Hz, half amplitude 1.5 mm0.059 in |
| Perjalanan pembukaan terus | 8 mm0.315 inmin. |
| Kenalan monitor pintu | 2NC |
| Ketahanan elektrik | 100,000 operations min.(900 operations/hour,AC-12 125 V 2A, DC-12 125 V 0.4 A)1,000,000 operations min.(900 operations/hour,24 V AC/DC 0.1 A resistive load) |
| Kunci kenalan monitor | 1NO |
| Ketahanan mekanikal | 1,000,000 operations min. (GS-ET-19) |
| Arus terma (Ith) | ・Ambient temperature : -25 to +35 ℃-13 to +95 ℉2.5 A (up to 2 circuits)1.0 A (3 or more circuits)・Ambient temperature : 35 to +50 ℃95 to +122 ℉1.0 A (1 circuit)0.5 A (2 or more circuits) |
| Peraturan yang berkenaan | CE Marking [Machinery Directive (2006/42/EC), RoHS Directive], UKCA Marking [Supply of Machinery (Safety) Regulations (2008 No.1597), RoHS Regulations] |
| Beban induktif (AC-15) | - |
| Beban induktif (DC-13) | 1A |
| Kelajuan operasi penggerak | 0.05 to 1.0 m/sec. |
| Voltan penebat yang dinilai (Ui) | 300 V (Door monitor circuit)150 V (Main, Lock monitor circuit)30 V (Between ground and LED, solenoid circuit) |
| Keadaan operasi: Ketinggian | 2,000 m6,561.68 ftmax. |
| Kelas perlindungan kejutan elektrik | Class II (IEC 61140)(Note), 回(double insulated)(Note): Basic insulation of 2.5 kV, 1.5 kV impulse withstand voltage is ensured between different contact circuits and between contact circuits and LED or solenoid in the enclosure. When both SELV (safety extra low voltage) or PELV (protective extra low voltage) circuits and other circuits (such as 230 V AC circuits) are used for the solenoid power and contact circuits at the same time, the SELV or PELV requirements are not met any more. |
| Peranti pelindung litar pintas | Use 250 V / 10 A fast acting type fuse |
| Voltan menahan impuls (Uimp) | 2.5 kV (Door monitor circuit)1.5 kV (Main, Lock monitor circuit)0.5 kV (Between ground and LED, solenoid circuit) |
| Solenoid / Petunjuk : Petunjuk | Green LED |
| Solenoid / Petunjuk: Arus yang dinilai | 110 mA (solenoid 100 mA, LED 10 mA : initial value) |
| Keadaan operasi: Kelembapan ambien | 45 to 85 % RH |
| Keadaan operasi: Tahap pencemaran | 3 (Inside 2) |
| Solenoid / Penunjuk: Hidupkan voltan | Rated voltage × 85 % max. (at 20 ℃68 ℉) |
| Solenoid / Penunjuk: Matikan voltan | Rated voltage × 10 % min. (at 20 ℃68 ℉) |
| Piawaian yang berkenaan: Piawaian untuk penggunaan | IEC 60204-1 / EN 60204-1, ISO 14119, EN ISO 14119, IEC 60947-5-1, UL 508, CSA C22.2 No.14 |
| Keadaan operasi: Suhu ambien | -25 to +50 ℃-13 to +122 ℉(No dew condensation or icing allowed)Storage : -40 to +80 ℃-40 to +176 ℉ |
| Solenoid / Petunjuk: Voltan operasi yang dinilai | DC 24 V 100% duty cycle |
| Voltan operasi dinilai (Ue) / Arus operasi dinilai (Ie) | Ue30V125V250VIeMain circuit, look monitor circuitACResistive load (AC-12)-2A-Inductive load (AC-15)-1A-DCResistive load (DC-12)2A0.4A-Inductive load (DC-13)1A0.22A-Door monitor circuitACResistive load (AC-12)-2.5A1.5AInductive load (AC-15)-1.5A0.75ADCResistive load (DC-12)2.5A1.1A0.55AInductive load (DC-13)2.3A0.55A0.27A |
Penerangan Produk
Safety limit switch (Ultra-narrow) for door with interconnection and magnetic lock, 5m cable, main 1NC+1NC, Monitor 2NC+1NO
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
