


| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Catatan | Use the safety light curtain monitoring information obtained via IO-Link only for diagnostic purposes. Do not use it for safety control purposes. |
| Berat | 270 g approx. |
| Produk | IO-Link communication unit for safety light curtain SF4D series |
| Bahan | Main unit case: PA66 (with glass)Base plate: SPCC + PlatingProduct model nameplate: PolyesterExternal connection connector: Brass + Plating |
| Fungsi | • IO-Link communication function• Safety light curtain setting data copy function (Note)Note :• The internal memory (nonvolatile) of this product has a service life. Settings cannot be configured more than 100,000 times.• This product cannot be used to directly enter settings from the IO-Link master unit to a safety light curtain using IO-Link communication.• The safety light curtain setting data copy function is designed only for use in maintenance / replace of safety light curtains.Use the copy function only for loading the setting data of the previous safety light curtain to a new unit. Loading the data to a device other than a newly installed safety light curtain may result in improper device operation.• This function cannot be used unless the product is connected with the IO-Link master unit and IO-Link communication is used. |
| Nombor Bahagian | SFD-WL3 |
| Nama produk | IO-Link Communication Unit |
| Nombor Produk | SFD-WL3 |
| Kelembapan ambien | 30 to 85% RH, Storage: 30 to 95% RH |
| Tahap pencemaran | 3 |
| Ketinggian operasi | 2,000 m6561.68 ftor lessNote : Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| Suhu ambien | -10 to +55℃14 to 131℉(No dew condensation or icing allowed),Storage: -25 to +60℃-13 to 140℉ |
| Tahap perlindungan | IP64 |
| Peraturan yang berkenaan | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Kategori voltan berlebihan | I |
| Bilangan unit yang boleh disambungkan: Produk ini | 1 unit |
| Rintangan alam sekitar: Rintangan kejutan | 300 m/s2acceleration (30 G approx.) in X, Y, and Z directions three times eachMalfunction resistance 100 m/s2acceleration (10 G approx.) in X, Y, and Z directions 1,000 times each |
| Voltan bekalan: Bahagian komunikasi IO-Link | 24V DC+20-25% Ripple P-P 10 % or less |
| Kaedah sambungan: Bahagian komunikasi IO-Link | 4-core cable with M12 connector (commercially available product) |
| Rintangan alam sekitar: Rintangan getaran | 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions for two hours eachMalfunction resistance 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions twenty times each |
| Penggunaan semasa: Bahagian komunikasi IO-Link | 30 mA or less |
| Rintangan alam sekitar: Rintangan penebat | 20 MΩ or more, with 500 V DC megger, between all supply terminals connected together and enclosure |
| Kaedah komunikasi: Bahagian komunikasi IO-Link | IO-Link specifications: Ver. 1.1Baud rate: COM3 (230.4 kbps)Data length: 18 bytes, process data (PD)Minimum cycle time: 1.5 ms |
| Sambungan: Langsir lampu keselamatan komunikasi sisi | 8-core cable for safety light curtain (optional) |
| Rintangan alam sekitar: Voltan kekuatan dielektrik | 1,000 V AC for one minute, between all supply terminals connected together and enclosure |
| Voltan bekalan: Bahagian komunikasi langsir lampu keselamatan | 24V DC+20-30% Ripple P-P 10 % or less |
| Penggunaan semasa: Tirai lampu keselamatan komunikasi sisi | 15 mA or less |
| Kaedah komunikasi: Langsir lampu keselamatan komunikasi sisi | RS-485 bidirectional communication (dedicated protocol) |
| Bilangan unit yang boleh disambungkan: Langsir lampu keselamatan dalam sambungan siri | Up to 5 units (total number of beam channels 256 or less) |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi