Dalam Stok Produk Hangat
USFC21
USFC21 SF-C21 PANASONIC Safety control unit for safety light curtain and other safety products, 8 inputs 24V..
$0.00USD
4642 dalam stok
Spesifikasi Utama
Barang:Specifications
Berat:Net weight: 190 g approx.Gross weight: 320 g approx.
Produk:Safety Control Unit
Bahan:Main unit enclosure: Polycarbonate / ABS polymer alloyEnclosure: Polycarbonate
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Berat | Net weight: 190 g approx.Gross weight: 320 g approx. |
| Produk | Safety Control Unit |
| Bahan | Main unit enclosure: Polycarbonate / ABS polymer alloyEnclosure: Polycarbonate |
| PFHD/ MTTFD | 9.73 x 10−10/ 100 years or more |
| Nombor Bahagian | SF-C21 |
| Panjang kabel | 100 m328.084 ftor less |
| Nama produk | Safety Control Unit SF-C21 |
| Nombor Produk | SF-C21 |
| Tahap pencemaran | 2 |
| Kaedah penyambungan | Input / output and power supply: Detachable spring cage termina l blocksRS-485: Detachable spring-cage terminal blockUSB: Mini-B male |
| Piawaian berkaitan | IEC 60947-1, IEC 60947-5-1, IEC 60947-5-2, IEC 60947-5-5, IEC 60947-5-8, IEC 61496-1, IEC TS 62046, ISO 13851 |
| Fungsi saling kunci | Incorporated |
| Ketinggian operasi | 2,000 m6561.680 ftor less(Note) Do not use or store this device in a pressurized environment beyond the atmospheric pressure at sea level. |
| Rintangan getaran | 5 to 8.4 Hz frequency, 3.5 mm0.138 inhalf amplitude, 8.4 to 150 Hz frequency, Max. acceleration 9.8 m/s2(1 G), in X, Y and Z directions for two hours each (IEC / EN 60068-2-6) |
| Fungsi tetapan logik | Input mode, control mode, output mode, reset mode, auxiliary ou tput mode |
| Kategori voltan berlebihan | II |
| Output penunjuk meredam | Semiconductor photo MOS relay output x 1- Maximum load current: 60 mA- Supply voltage: Same as the voltage of the power supply for internal- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| Fungsi pelepas penguncian | Incorporated |
| Fungsi pemilihan logik | No.0: Customization controlNo.1: Overall stop controlNo.2: Parallel muting controlNo.3: Sequential muting controlNo.4: Partial stop control 1No.5: Partial stop control 2No.6: Two-hand controlNo.7: OR controlNo.8: Operation mode selection control |
| Input keselamatan (IN1 hingga IN8) | 2 inputs x 4, Rated voltage: Same as the voltage of the power supply for internal |
| Piawaian yang berkenaan: EMC | IEC 61000-6-2, IEC 61326-3-1, EN 55011 |
| Masa permulaan selepas kuasa dihidupkan | 2 sec. or less |
| Piawaian yang berkenaan: Keselamatan | IEC 61508-1 to 3, EN 61508-1 to 3 (SIL3), ISO 13849-1:2015 (Category 4, PLe), IEC 61131-2, IEC 61010-2-201, IEC 62061 (SILCL3), UL 61010-1, UL 61010-2-201, UL 1998 |
| Output kawalan (OUT1 hingga OUT4) | PNP open-collector transistor with 2 outputs x 2- Maximum source current: 300 mA / output- Applied voltage: Same as the voltage of the power supply for external- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| Fungsi komunikasi (MODBUS RTU) | Interface: RS-485Protocol: MODBUS RTUMaximum transmission distance: 100 m328.084 ftMaximum number of units that can be connected: 8 units (slaves) |
| Fungsi pemantauan peranti luaran | Incorporated |
| Input keselamatan (IN1 hingga IN8): Tahap HIDUP | Input voltage: 18 VInput current: 3.5 mA |
| Output penunjuk meredam: Mod output | ON when muting / override |
| Input keselamatan (IN1 hingga IN8): Tahap MATI | Input voltage: 5 VInput current: 1.0 mA |
| Output penunjuk meredam: Masa tindak balas | 10 ms or less |
| Peraturan dan pensijilan yang berkenaan | CE Marking (Machinery Directive, EMC Directive, RoHS Directive), UKCA Marking [Supply of Machinery (Safety)Regulations, EMC Regulations, RoHS Regulations], TÜV SÜD certification, Korea's Radio Waves Act conformity registration |
| Rintangan alam sekitar: Kelembapan ambien | 30 to 85 % RH, Storage: 30 to 85 % RH |
| Rintangan alam sekitar: Rintangan kejutan | 147 m/s2(15 G) 11 ms in X, Y and Z directions for three times each (IEC / EN 60068-2-27) |
| Voltan bekalan: Bekalan kuasa untuk luaran | 24 V DC+10-15% Ripple P-P10 % or less(Note) "Power supply for external" is the power supply for control output / auxiliary output. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| Voltan bekalan: Bekalan kuasa untuk dalaman | 24 V DC+10-15% Ripple P-P10 % or less(Note) "Power supply for internal" is the power supply for safety input. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| Output kawalan (OUT1 hingga OUT4): Mod output | True: ONFalse: OFF |
| Input keselamatan (IN1 hingga IN8): Impedans input | 4.7 KΩ approx. |
| Rintangan alam sekitar: Suhu ambien | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: -25 to +60 ℃-13 to +140 ℉ |
| Output kawalan (OUT1 hingga OUT4): Masa tindak balas | OFF response: 10 ms or lessON response: 100 ms or less |
| Rintangan alam sekitar: Tahap perlindungan | IP20 (IEC)(must be installed in a control panel with protectio n IP54 or higher) |
| Rintangan alam sekitar: Rintangan penebat | 20 MΩ, or more, with 500 V DC megger(All inputs connected together - USB port, all inputs connected together - RS-485 port, USB port - RS-485 port, between all supply terminals connected together and enclosure, all outputs connected together - all input connected together, all outputs connected together - USB port, all outputs connected together - RS-485 port) |
| Penggunaan semasa: Bekalan kuasa untuk luaran | 100 mA or less(Note) "Power supply for external" is the power supply for control output / auxiliary output. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| Penggunaan semasa: Bekalan kuasa untuk dalaman | 200 mA or less(Note) "Power supply for internal" is the power supply for safety input. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| Input keselamatan (IN1 hingga IN8): Arus input yang dinilai | 5 mA approx. |
| Output tambahan (AUX1 hingga AUX4) (Output bukan keselamatan) | PNP open-collector transistor with 1 output x 4- Maximum source current: 60 mA / output- Applied voltage: Same as the voltage of the power supply for external- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| Output kawalan (OUT1 hingga OUT4): Fungsi kelewatan HIDUP | Incorporated |
| Rintangan alam sekitar: Ketahanan voltan | 1,000 V AC for one min.(All inputs connected together - USB port, all inputs connected together - RS-485 port, USB port - RS-485 port, between all supply terminals connected together and enclosure, all outputs connected together - all input connected together, all outputs connected together - USB port, all outputs connected together - RS-485 port) |
| Output kawalan (OUT1 hingga OUT4): Fungsi kelewatan OFF | Incorporated |
| Output penunjuk meredam: Perlindungan litar pintas | Incorporated |
| Output kawalan (OUT1 hingga OUT4): Perlindungan litar pintas | Incorporated |
| Input keselamatan (IN1 hingga IN8): Tempoh keadaan HIDUP yang boleh dikesan | 10 ms or more |
| Input keselamatan (IN1 hingga IN8): Tempoh keadaan OFF yang tidak dapat dikesan | 0.7 ms or less |
| Output tambahan (AUX1 hingga AUX4) (Output bukan keselamatan): Masa tindak balas | 10 ms or less |
| Output tambahan (AUX1 hingga AUX4) (Output bukan keselamatan): Perlindungan litar pintas | Incorporated |
| Output tambahan (AUX1 hingga AUX4) (Output bukan keselamatan): Mod output (Lalai kilang) | AUX1: Negative logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is OFF)AUX2: Negative logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is OFF)AUX3: Reset trigger output (ON under reset release wait condition)AUX4: Lockout output (OFF when lockout) |
| Output tambahan (AUX1 hingga AUX4) (Output bukan keselamatan): Mod output (Mana-mana output tambahan boleh disesuaikan menggunakan alat perisian) | Negative logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is OFF)Negative logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is OFF)Positive logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is ON)Positive logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is ON)Outputs A, B, C, and D of diagnosis results of input blocks (ON when logic is true)Outputs E, F, and G of internal logic circuit diagnostic results (ON when logic is true)Reset trigger output (ON under reset release wait condition)Lockout output (OFF when lockout)Muting indicator output (ON when muting / override)Monitor output in response to IN1 to IN8 (ON when input)No output (normally OFF) |
Penerangan Produk
Control unit for barriers and other safety products, Cat. 4(Ple) and SIL3, 4 inputs, 2 outputs, 8 pre-established logics according to cat regulations. 4 (Ple) and 1 customizable logic, self-diagnostic
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
