


| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| PFHD | 3.73 × 10-9(Note) Probability of dangerous failure per hour. |
| Kabel | 0.16 mm25-core heat-resistant PVC cable, 3 m 9.842 ft long |
| MTTFD | 100 years or more(Note) Mean time to dangerous failure. |
| Butiran | Hand protection type Min. sensing object ø25 mmø0.984 in(20 mm0.787 inbeam pitch) |
| Produk | Ultra-slim Light Curtain [Type 2 PLc SIL1] |
| Bahan | Enclosure: Polycarbonate alloySensing surface: Polycarbonate alloyMS-SFC-1 (Standard mounting bracket): Stainless steel (SUS) |
| Padang rasuk | 20 mm0.787 in |
| Aksesori | MS-SFC-1 (Standard mounting bracket): 1 setSF4C-TR25 (Test rod): 1 No. |
| Nombor Bahagian | SF2C-H16-P |
| Nama produk | Ultra-slim Light Curtain [Type2 PLc SIL1] SF2C |
| Voltan kuasa | 24 V DC plus or minus 20 % Ripple P-P 10 % or less |
| Masa tindak balas | OFF response: 20 ms or lessON response: 80 to 100 ms |
| Nombor Produk | SF2C-H16-P |
| Sambungan kabel | Extension up to total 50m is possible for 0.3mm2or more, cable |
| Julat operasi | 0.1 to 3 m0.328 to 9.843 ft |
| Unsur pemancar | Infrared LED (Peak emission wavelength: 850 nm0.034 mil) |
| Tahap pencemaran | 3 |
| Ketinggian pelindung | 320 mm12.598 in |
| Ketinggian operasi | 2, 000 m6561.680 ftor less(Note) Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| Pencahayaan ambien | Incandescent light: 5,000 ℓx or less at the light-receiving face |
| Output penguncian (SSD) | - Maximum sink current: 60mA- Applied voltage: same as supply voltage (between the lockout output and +V)- Residual voltage: 2.5V or less (source current 60mA, when using 10m length cable)- Leakage current: 200micro A or less (power supply OFF condition)- Maximum load capacity: 2.2micro F (No load to maximum output current)- Load wiring resistance: 3Ω or less |
| Objek pengesan minimum | ø25 mmø0.984 inopaque object |
| Fungsi input ujian | Incorporated |
| Output kawalan (OSSD) | - Maximum source current: 200mA- Applied voltage: same as supply voltage (between the control output and +V)- Residual voltage: 2.5V or less (source current 200mA, when using 10m length cable)- Leakage current: 200micro A or less (power supply OFF condition)- Maximum load capacity: 2.2micro F (No load to maximum output current)- Load wiring resistance: 3Ω or less |
| Bilangan saluran pancaran | 16 |
| Sudut apertur berkesan | plus or minus 5℃ or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / ANSI/UL 61496-2) ] |
| Piawaian yang berkenaan: Jepun | JIS B 9704-1 / 2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508-1 to 3 (SIL 1) |
| Piawaian yang berkenaan: Eropah | EN 61496-1 (Type 2), EN ISO 13849-1:2015 (Category 2, PLc), EN 61508-1 to 3 (SIL 1), EN 55011, EN 50178, EN 61000-6-2(Note) Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type examination certificate. |
| Fungsi pencegahan gangguan | Incorporated |
| Piawaian yang berkenaan: Amerika Utara | ANSI / UL 61496-1 / 2 (Type 2), ANSI / UL 508, CAN / CSA 61496-1 / 2 (Type 2), CAN / CSA C22.2 No.14, ANSI / RIA 15.06(Note) With regards to the standards in the US/Canada, a Notified Body, TÜV SÜD, has certified the CTÜVUS mark. |
| Output penguncian (SSD): Mod operasi | ON during normal operation, OFF during lockout(Note) If the emitter enters a lockout state, and light from the emitter enters the receiver, lockout information will be transmitted and lockout output (SSD) will turn OFF. |
| Output kawalan (OSSD): Mod operasi | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal) |
| Fungsi penunjuk pelbagai guna yang besar | Incorporated |
| Output penguncian (SSD): Litar perlindungan | Incorporated |
| Output kawalan (OSSD): Litar perlindungan | Incorporated |
| Peraturan dan pensijilan yang berkenaan | CE Marking (Machinery Directive, EMC Directive, RoHS Directive), UKCA Marking [Supply of Machinery (Safety) Regulations, EMC Regulations, RoHS Regulations], TÜV SÜD certification |
| Rintangan alam sekitar: Kelembapan ambien | 30 to 85 % RH, Storage: 30 to 85 % RH |
| Rintangan alam sekitar: Rintangan kejutan | 300 m / s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| Berat bersih (Jumlah pemancar dan penerima) | 400 g approx. |
| Piawaian yang berkenaan: Piawaian antarabangsa | IEC 61496-1 / 2 (Type 2), ISO 13849-1:2015 (Category 2, PLc), IEC 61508-1 to 3 (SIL 1) |
| Rintangan alam sekitar: Suhu ambien | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: - 25 to +60 ℃- 13 to +140 ℉ |
| Rintangan alam sekitar: Tahap perlindungan | IP65, IP67 (IEC) |
| Rintangan alam sekitar: Rintangan getaran | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Rintangan alam sekitar: Rintangan penebat | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Rintangan alam sekitar: Ketahanan voltan | 1, 000 V AC for one min. between all supply terminals connected together and enclosure |
| Penggunaan semasa: Penunjuk pelbagai guna yang besar menyala | Emitter: 40 mA or lessReceiver: 35 mA or less |
| Penggunaan semasa: Lampu penunjuk pelbagai guna yang besar padam | Emitter: 30 mA or lessReceiver: 30 mA or less |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi