

| Parameter | Nilai |
|---|---|
| 0.25 mm² ... 1.5 mm² (Ferrule without plastic sleeve) | |
| Nota | ELCO pin strip type 8016/EDAC pin strip type 516, right |
| Kedalaman | 49 mm |
| Padang | 3.81 mm |
| Lebar | 180 mm |
| Pengekodan | 1-1 |
| Ketinggian | ≤ 2000 m |
| Penebat | Functional insulation |
| Jenis produk | Interface module |
| Benang skru | M3 |
| Jenis pemasangan | DIN rail mounting |
| Tahap pencemaran | 2 |
| Panjang pelucutan | 8 mm |
| Kaedah sambungan | EDAC / ELCO pin strip |
| Kedudukan pemasangan | any |
| Tork pengetatan | 0.5 Nm ... 0.6 Nm |
| Nota tentang operasi | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Bilangan jawatan | 56 |
| Voltan lonjakan yang dinilai | 0.5 kV (1.2/50 μs) |
| Semasa (setiap cawangan) | ≤ 2 A |
| Kategori voltan lampau | II |
| Bilangan sambungan | 1 |
| Piawaian/peraturan | EN IEC 60664-1 |
| Voltan operasi (AC) | ≤ 30 V AC |
| Voltan operasi (DC) | ≤ 50 V |
| Paparan status hadir | No |
| Arus (Jumlah arus) | ≤ 55 A |
| Voltan penebat yang dinilai | 50 V |
| Keratan rentas konduktor AWG | 24 ... 12 |
| Keratan rentas konduktor tegar | 0.2 mm² ... 4 mm² |
| Tahap perlindungan (Modul) | IP00 |
| Suhu ambien (operasi) | -20 °C ... 50 °C |
| Keratan rentas konduktor fleksibel | 0.2 mm² ... 4 mm² |
| Suhu ambien (penyimpanan/pengangkutan) | -20 °C ... 70 °C |
| Tahap perlindungan (Lokasi pemasangan) | ≥ IP54 |
| Keratan rentas konduktor tegar (2 konduktor dengan keratan rentas yang sama) | 0.2 mm² ... 1 mm² |
| Keratan rentas konduktor fleksibel (2 konduktor dengan keratan rentas yang sama) | 0.2 mm² ... 1 mm² |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi