

| Parameter | Nilai |
|---|---|
| TDIL11 (redundant) | |
| Kedalaman | 66 mm |
| Lebar | 344 mm |
| Ketinggian | ≤ 2000 m |
| Penebat | Functional insulation |
| Jenis produk | Interface module |
| Benang skru | M3 |
| Nota perhimpunan | in rows with zero spacing |
| Jenis pemasangan | DIN rail mounting |
| Mod operasi | 100% operating factor |
| Bilangan saluran | 16 |
| Semakan artikel | 04 |
| Bahan sentuh | Ag alloy, hard gold-plated |
| Tahap pencemaran | 2 |
| Panjang pelucutan | 8 mm |
| Kaedah sambungan | D-SUB pin strip |
| Kedudukan pemasangan | any |
| Kad I/O yang sesuai | TDIL01 (non-redundant) |
| Nota tentang operasi | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Litar pelindung | Fuse |
| Julat voltan input | 40.8 V DC ... 52.8 V DC |
| Bilangan jawatan | 37 |
| Voltan lonjakan yang dinilai | 0.6 kV (1.2/50 μs) |
| Tahap perlindungan | IP00 |
| Kategori voltan lampau | II |
| Masa pelepasan biasa | 7 ms |
| Bilangan sambungan | 1 |
| Piawaian/peraturan | EN IEC 60664-1 |
| Masa tindak balas biasa | 5 ms |
| Jenis pensuisan kenalan | 1 N/O contact |
| Arus pensuisan minimum | 1 mA (10 mA with damaged gold coating) |
| Paparan status hadir | Yes |
| Paparan/saluran status | Yellow LED |
| Jenis kenalan suis | Single contact |
| Hayat perkhidmatan mekanikal | approx. 2x 107cycles |
| Voltan input nominal UN | 48 V DC |
| Voltan penebat yang dinilai | 63 V |
| Voltan pensuisan maksimum | 36 V DC (60 V DC with damaged gold coating) |
| Voltan pensuisan minimum | 100 mV (12 V DC with damaged gold coating) |
| Keratan rentas konduktor AWG | 24 ... 12 |
| Mengehadkan arus berterusan | 50 mA (500 mA with damaged gold coating) |
| Arus input tipikal di UN | 6.5 mA |
| Keratan rentas konduktor tegar | 0.2 mm² ... 4 mm² |
| Suhu ambien (operasi) | -15 °C ... 50 °C |
| Keratan rentas konduktor fleksibel | 0.2 mm² ... 2.5 mm² |
| Kadaran gangguan (beban ohm) maks. | 1.2 W (at 24 V DC) |
| Julat voltan input merujuk kepada UN | 0.85 ... 1.1 |
| Suhu ambien (penyimpanan/pengangkutan) | -15 °C ... 50 °C |
| Tahap perlindungan (Lokasi pemasangan) | ≥ IP54 (Installation location) |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi