

| Parameter | Nilai |
|---|---|
| Kedalaman | 65 mm |
| Lebar | 240 mm |
| Ketinggian | ≤ 2000 m |
| Jeneral | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Nota EMC | EMC: class A product, see manufacturer's declaration in the download area |
| Penebat | Basic insulation |
| Jenis produk | Relay Module |
| Benang skru | UNC 4-40 |
| Jenis pemasangan | DIN rail mounting |
| Tahap pencemaran | 2 |
| Kaedah sambungan | D-SUB socket strip |
| Kedudukan pemasangan | any |
| Bilangan jawatan | 25 |
| Voltan lonjakan yang dinilai | 2.5 kV (50 Hz, 1 min.) (The specified data only applies in connection with the optocouplers listed under “required accessories”) |
| Tahap perlindungan | IP00 |
| Kategori voltan lampau | III |
| Arahan pemasangan | in rows with zero spacing |
| Piawaian/peraturan | DIN EN 50178: 1998-04 |
| Paparan status hadir | No |
| Voltan input nominal UN | 24 V DC |
| Voltan pensuisan maksimum | 24 V DC |
| Keratan rentas konduktor AWG | 24 ... 12 |
| Mengehadkan arus berterusan | 1 A (per channel (2-conductor, floating)) |
| Arus input tipikal di UN | 1 A (per channel) |
| Keratan rentas konduktor tegar | 0.2 mm² ... 4 mm² |
| Suhu ambien (operasi) | -20 °C ... 50 °C |
| Keratan rentas konduktor fleksibel | 0.2 mm² ... 2.5 mm² |
| Sambungan dalam akaun dengan standard | DIN 41652/IEC 60807-2 |
| Julat voltan input merujuk kepada UN | 0.9 ... 1.1 |
| Tahap perlindungan (Lokasi pemasangan) | ≥ IP54 (Installation location) |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi