

| Parameter | Nilai |
|---|---|
| Kedalaman | 146 mm |
| Lebar | 61 mm |
| Ketinggian | ≤ 2000 m |
| Penebat | Reinforced insulation |
| Jenis produk | Relay Module |
| Jenis pemasangan | DIN rail mounting |
| Dengan komponen | yes |
| Tahap pencemaran | 2 |
| Kaedah sambungan | IDC/FLK pin strip |
| Kedudukan pemasangan | any |
| Nota tentang operasi | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Bilangan jawatan | 14 |
| Voltan lonjakan yang dinilai | 6 kV (1.2/50 μs) |
| Tahap perlindungan | IP00 |
| Kategori voltan lampau | III |
| Bilangan sambungan | 1 |
| Piawaian/peraturan | DIN EN 50178: 1998-04 |
| Jenis pensuisan kenalan | Single contact, 1 changeover contact |
| Voltan input nominal UN | 24 V DC (±10 %) |
| Voltan penebat yang dinilai | 260 V |
| Voltan pensuisan maksimum | 150 V AC/DC (Maximum switching voltage of 230 V AC: the maximum switching voltage of 230 V is only permitted if the same fuse circuit is used. The outputs are not suitable for switching different outer conductors.) |
| Keratan rentas konduktor AWG | 24 ... 12 |
| Mengehadkan arus berterusan | 4 A |
| Arus input tipikal di UN | 200 mA (200 mA supply / ≤ 20 mA input current per signal) |
| Keratan rentas konduktor tegar | 0.2 mm² ... 2.5 mm² |
| Suhu ambien (operasi) | -20 °C ... 50 °C |
| Keratan rentas konduktor fleksibel | 0.2 mm² ... 2.5 mm² |
| Sambungan dalam akaun dengan standard | IEC 60603-13 |
| Tahap perlindungan (Lokasi pemasangan) | ≥ IP54 (Installation location) |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi