Waktu Perkhidmatan: Isnin hingga Jumaat 9:00-18:00
ULX101P - ULX101P LX101P LX-101-P PANASONIC Digtal mark sensor, teach-in, PNP, cable 2m
Dalam Stok Produk Hangat

ULX101P

ULX101P LX101P LX-101-P PANASONIC Digtal mark sensor, teach-in, PNP, cable 2m

$0.00USD
4922 dalam stok
Spesifikasi Utama
Barang:Specifications
Kabel:0.34 mm25-core cabtyre cable, 2 m6.562 ftlong
Berat:Net weight: 120 g approxGross weight: 180 g approx
Butiran:Cable type
Maklumat Pembekal
PANASONIC
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal

Spesifikasi Teknikal

ParameterNilai
BarangSpecifications
Kabel0.34 mm25-core cabtyre cable, 2 m6.562 ftlong
BeratNet weight: 120 g approxGross weight: 180 g approx
ButiranCable type
ProdukDigital Mark Sensor
BahanEnclosure: PBTDisplay cover: PolycarbonateOperation buttons: Silicone rubberLens: GlassLens holder: Aluminum
AksesoriM4 (length 30 mm1.181 in) screw with washers: 2 pcs.
Saiz tempat1 x 5 mm 0.039 x0.197 in(at 10 mm0.394 insetting distance)
PerlindunganIP67 (IEC)
Nombor BahagianLX-101-P
Nama produkDigital Mark Sensor LX-100
Keluaran 1 (KELUAR)PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less (at 50 mA source current)
Keluaran 2 (KELUAR)PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less (at 50 mA source current)
Masa tindak balasMark mode: 45 micro s or lessColor mode: 150 micro s or less
Julat pengesanan10 ± 3 mm0.394 ± 0.118 in
Nombor ProdukLX-101-P
Voltan bekalan12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Input pengajaranPNP non-contact input- Signal condition: High... +4 V to +V (sink current: 3 mA or less), Low... 0 to +0.6 V, or open- Input impedance: 10 kOhm approx.
Fungsi pemasaIncorporated with variable ON-delay / OFF-delay timer,switchable either effective or ineffective(Timer period: 1 to 500 ms, 9 levels variable)
Sambungan kabelExtension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable.
Paparan digital4-digit red LED display
Kelembapan ambien35 to 85 % RH, Storage: 35 to 85 % RH
Unsur pemancarCombined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm0.025 mil/ 525 nm0.021 mil/ 470 nm0.019 mil)
Rintangan kejutan500 m/s2acceleration (50 G approx.) in X, Y and Z directionsthree times each
Pencahayaan ambienIncandescent light: 3,000 lx or less at the light-receiving face
Suhu ambien-10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉
Penggunaan semasaNormal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)
Tetapan sensitivitiMark mode: 2-level teaching / Full-auto teachingColor mode: 1-level teaching
Rintangan getaran10 to 500 Hz frequency, 3.0 mm0.118 indouble amplitude (max. 20 G) in X, Y and Z directions for two hours each
Ketahanan voltan1,000 V AC for one min. between all supply terminals connected together and enclosure
Output 1: Operasi outputMark mode: Light-ON / Dark-ON (Auto-setting on teaching)Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)
Output 2: Operasi outputInverted operation of the output 1
Pematuhan arahan penandaan CEEMC Directive, RoHS Directive
Output 1: Perlindungan litar pintasIncorporated
Output 2: Perlindungan litar pintasIncorporated
Fungsi pelarasan sensitiviti halusIncorporated

Penerangan Produk

Sensor for mark/color detection, automatic selection of RGB optical LED, cable, PNP
Ciri-ciri Utama
  • Kualiti gred industri
  • Patuh RoHS
  • Sijil CE
  • Jaminan 1 tahun

Dokumen Produk

Lembaran Data

Spesifikasi teknikal dan data prestasi

Manual Pengguna

Panduan pemasangan dan operasi

Top