Dalam Stok Produk Hangat
ULSH102C5
ULSH102C5 LS-H102-C5 PANASONIC Sensor head, thru-beam, side sensing type, range 1m, cable 5m
$0.00USD
4324 dalam stok
Spesifikasi Utama
Barang:Specifications
Kabel:0.09 mm22-core shielded cable, 2 m 6.562 ft long(Note：Cable cannot be extended.)
Butiran:Sensor heads(Thru-beam type)
Produk:Amplifier-separated Type Digital Laser Sensor
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Kabel | 0.09 mm22-core shielded cable, 2 m 6.562 ft long(Note：Cable cannot be extended.) |
| Butiran | Sensor heads(Thru-beam type) |
| Produk | Amplifier-separated Type Digital Laser Sensor |
| Bahan | Enclosure: PBTCover: Acrylic |
| Aksesori | MS-EXL2-2 (Mounting plate): 2 pcs. |
| Saiz tempat | Approx. dia. 5 mm dia. 0.197 in or less (at a distance from the emitter of 1 m 3.281 ft) |
| Perlindungan | IP67 (IEC) |
| Nombor Bahagian | LS-H102-C5 |
| Nama produk | Amplifier-separated Type Digital Laser Sensor LS-500 |
| Nombor Produk | LS-H102-C5 |
| Objek pengesan | Opaque, translucent, or transparent object(Note：Make sure to confirm detection with an actual sensor before use.) |
| Kelembapan ambien | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Rintangan kejutan | 98 m / s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Julat pengesanan: HYPR | 1m3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Julat pengesanan: U-LG | 1m3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Pencahayaan ambien | Incandescent light: 3,000 ℓx or less at the light-receiving face |
| Suhu ambien | -10 to +55degrees + 14 to + 131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70degrees -4 to +158 degrees Fahrenheit |
| Penunjuk operasi | Orange LED (lights up when the amplifier output is ON) |
| Rintangan getaran | 10 to 500 Hz frequency, 1.5 mm double amplitude or maximum acceleration 98 m/s2in X, Y, and Z direction for 2 hours each. |
| Penguat yang berkenaan | LS-501(P), LS-501(P)-C2(Note：When using the thru-beam typeLS-H101□orLS-H102□, do not set the receiving light sensitivity (gctL) of the applicableLS-500series amplifier to level 2 or less. This is because there is a possibility of sensing becoming unstable.) |
| Elemen pemancar: Jenis | Red semiconductor laser diode |
| Rintangan penebat | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Pematuhan peraturan | EMC Directive, RoHS Directive |
| Julat pengesanan: Mod STD | 1m3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Julat pengesanan: Mod FAST | 1m3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Julat pengesanan: mod H-SP | 1m3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Julat pengesanan: Mod U-LG | 1m3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Ketahanan voltan | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Elemen pemancar: Kelas laser | Class 1 [IEC / EN / JIS / GB / KS / FDA](Note：This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3. |
| Elemen pemancar: Output maksimum | 2mW |
| Elemen pemancar: Panjang gelombang pancaran puncak | 660 nm 0.026 mil |
Penerangan Produk
LS500. Sensor head, barrier, side detection, range 1m, cable 5m
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
