Dalam Stok Produk Hangat
ULS501PC2
ULS501PC2 LS-501P-C2 PANASONIC Laser Amplifier (with display), cable type 2m, 2 outputs PNP + analog 4 to 20..
$0.00USD
4876 dalam stok
Spesifikasi Utama
Barang:Specifications
Kabel:0.2mm2 6-core cabtyre cable, 2 m 6.562 ft long(Note：Cable cannot be extended.)
Berat:Net weight: 75 g approx.Gross weight: 110 g approx.
Butiran:Amplifiers(Cable type)
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Kabel | 0.2mm2 6-core cabtyre cable, 2 m 6.562 ft long(Note：Cable cannot be extended.) |
| Berat | Net weight: 75 g approx.Gross weight: 110 g approx. |
| Butiran | Amplifiers(Cable type) |
| Produk | Amplifier-separated Type Digital Laser Sensor |
| Bahan | Enclosure: PolycarbonateCover: PolycarbonateSwitch: Polyacetal |
| Aksesori | FX-MB1 (Amplifier protective seal): 1 set |
| Perlindungan | IP40(IEC) |
| Nombor Bahagian | LS-501P-C2 |
| Nama produk | Amplifier-separated Type Digital Laser Sensor LS-500 |
| Masa tindak balas | H-SP: 60 micro s or less, FAST: 150 micro s or less, STD: 250 micro s or less, LONG: 500 micro s or less, U-LG: 5 ms or less, HYPR: 24 ms or less selectable |
| Input luaran | PNP non-contact input- Signal condition High: +4 Vto+V DC(sink current 3.0 mA or less), Low: 0 to +0.6 V DC or open- Input impedance: 10 kOhm approx.(Note：Select either sensing output 2 or external input.) |
| Nombor Produk | LS-501P-C2 |
| Voltan bekalan | 12 to 24 V DC +10-15% Ripple P-P 10 % or less |
| Fungsi pemasa | OFF-delay timer, ON-delay timer, ONE-SHOT timer, ON / OFF-delay timer, ON-delay / ONE-SHOT timer,switchable either effective of ineffective, with variable timer periodOFF-delay timer, ON-delay timer, ONE-SHOT timer,switchable either effective of ineffective, with variable timer period |
| Sambungan kabel | Extension up to total 100 m 328.084 ft is possible with 0.3mm2, or more, cable. |
| Paparan digital | 8-digit 7-segment digital display (4-digit green LED + 4-digit red LED), MODE indicator (Yellow LED): L/D, CUST, PRO |
| Kelembapan ambien | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Rintangan kejutan | 98 m/s2acceleration (10 G approx.) in X, Y and Z directions for five times each |
| Operasi logik | Between sensing output 1 and calculation target: Disabled / and / or / xor, selectableCalculation target: Sensing output 2 / adjacent upstream amplifier (sensing output 1) / external input, selectable |
| Penggunaan kuasa | Normal operation: 1,200 mW or less (Current consumption 50 mA or less at 24 V supply voltage,excluding monitor current output)ECO mode: 980 mW or less (Current consumption 40 mA or less at 24 V supply voltage,excluding monitor current output) |
| Suhu ambien | -10 to +55degrees + 14 to 131 degrees Fahrenheit (If 4 to 7 units are mounted close together, -10 to +50 degrees +14 to +122 degrees Fahrenheit ; if 8 to 12 units are mounted close together, -10 to +45 degrees +14 to +113 degrees Fahrenheit )(No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Penunjuk operasi | Orange LED (lights up when sensing output 1 or sensing output 2 is ON) |
| Tetapan sensitiviti | 2-level teaching / limit teaching / full auto teaching / manual adjustment |
| Fungsi pemasa: Masa | Timer range '' ms'': 0.5 ms approx., 1 to 9,999 ms approx., in approx. 1 ms intervalsTimer range '' sec'': 0.5 sec. approx., 1 to 32 sec. approx., in approx. 1 sec. intervalsTimer range '' 1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., in approx. 0.1 ms intervals, Set separately for each output. |
| Rintangan getaran | 10 to 150 Hz frequency, 1.5 mm double amplitude or maximum acceleration 98 m/s2in X, Y, and Z direction for 2 hours each. |
| Rintangan penebat | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Pematuhan peraturan | EMC Directive, RoHS Directive |
| Pantau output semasa | Output current: Approx. 4 to 20 mA (H-SP, FAST, STD: at 0 to 4,000 indication)Response time: 2 ms or lessZero point: 4 mA plus or minus 1 % F.S.Span: 16 mA plus or minus 5 % F.S.Linearity: plus or minus 3 % F.S.Load resistance: 0 to 250 Ohm |
| Fungsi input luaran | Laser emission halt / teaching (full-auto teaching, limit teaching, 2 point teaching) / logic operation setting / copy lock /display adjustment / data bank load / data bank save, selectable |
| Penunjuk pilihan output | Yellow LED (lights up when output is selected) |
| Penunjuk pancaran laser | Green LED (lights up during laser emission) |
| Ketahanan voltan | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Julat petunjuk cahaya insiden | H-SP/FAST/STD: 0 to 4,000LONG/U-LG/HYPR: 0 to 9,999 |
| Output pengesanan (Output pengesanan 1, 2) | PNP open-collector transistor・Maximum source current: 50 mA (Note：25 mA if 5 or more amplifier are connected in cascade (excluding cable extension).)・Applied voltage: 30 V DC or less (between output and +V)・Residual voltage: 2 V or less (at max. source current)(Note：Select either sensing output 2 or external input as the connector type.) |
| Tetapan output pengesanan: Output pengesanan 1 | Normal mode, differential mode, hysteresis mode, window comparator mode, selectable |
| Tetapan output pengesanan: Output pengesanan 2 | Normal mode, differential mode, hysteresis mode, self-diagnostic output mode, answer-back output mode, selectable(Note：Select either sensing output 2 or external input.) |
| Fungsi pencegahan gangguan automatik | Incorporated(Note：Number of units that can be mounted close together: 0 for H-SP; 2 for FAST; 4 for STD, LONG, U-LG, or HYPR) |
| Output pengesanan (Output pengesanan 1, 2): Operasi output | Selectable either Light-ON or Dark-ON |
| Output pengesanan (Output pengesanan 1, 2): Perlindungan litar pintas | Incorporated |
Penerangan Produk
LS500. Laser Amplifier (with display), 2m cable, 2 PNP + analog outputs
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
