Dalam Stok Produk Hangat
UHLT1001A
UHLT1001A HLT1001A HL-T1001A PANASONIC HL-T1 sensor heads, 1mm type
$0.00USD
3030 dalam stok
Spesifikasi Utama
Barang:Specifications
Jenis:Beam diameter dia.1 mm dia.0.039 in type
Kabel:0.09mm23-core shielded cable with connector, 0.5 m1.640 ftlong
Berat:Emitter: 15 g approx.Receiver: 15 g approx.
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Jenis | Beam diameter dia.1 mm dia.0.039 in type |
| Kabel | 0.09mm23-core shielded cable with connector, 0.5 m1.640 ftlong |
| Berat | Emitter: 15 g approx.Receiver: 15 g approx. |
| Butiran | Sensor head (Beam diameter dia.1 mm dia.0.039 in type) |
| Produk | Ultra-compact Laser Collimated Beam Sensor |
| Bahan | Enclosure: PolyetherimideCase cover: PolycarbonateFront cover: Glass |
| Aksesori | MS-HLT1-1(Sensor head mounting bracket): One set of two brackets for both the emitter and the receiverCN-HLT1-1(Sensor head to controller connection cable): 1 cableLaser beam alignment sticker: 2 pcs.Label set (FDA regulations conformed type only): 1 set |
| Nombor Bahagian | HL-T1001A |
| Nama produk | Ultra-compact Laser Collimated Beam Sensor HL-T1 |
| Julat pengesanan | ■■【In the case of(0 to 500 mm 0to 19.685 in)】■■Sensing width:ø1 mmø0.039 inMin. sensing object:ø8 micro mø0.315 milopaque objectRepeatability (During the state in which light is half blocked):4 micro m0.157 mil(Note：In case of an average sampling rate of 64 times.)Linear output resolution:4 micro m0.157 mil(Note) In case of an average sampling rate of 64 times.(Note)Value calculated with the linear output allowance factor (plus or minus 3 sigma) when connected to the controller included in the calculation of the detection width.(Note：This value was obtained by converting the range of linear output fluctuation (plus or minus 3 sigma) into a sensing width, assuming that the smallest sensing object blocks the beam at the approximate center of the beam diameter of ø1 mmø0.039 in.)■■【In the case of (500 to 2,000 mm19.685 to 78.74 in)】■■Sensing width:ø1 to ø2.5 mmø0.039 to ø0.098 inMin. sensing object:ø50 micro mø1.969 milopaque objectRepeatability (During the state in which light is half blocked): -Linear output resolution: -- |
| Nombor Produk | HL-T1001A |
| Sambungan kabel | Extension up to total 10 m32.808 ftis possible, with the optional cable. |
| Tahap pencemaran | 3 (industrial environment) |
| Penunjuk pelepasan | Green LED (lights up during laser emission) |
| Pengawal yang berkenaan | HL-AC1, HL-AC1P |
| Rintangan penebat | 100 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Ketahanan voltan | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Pematuhan arahan penandaan CE | EMC Directive, RoHS Directive |
| Fungsi pencegahan gangguan | Two units of sensors can be mounted close together. (When the controller interference prevention function is used) |
| Rintangan alam sekitar: Kelembapan ambien | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Rintangan alam sekitar: Rintangan kejutan | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| Rintangan alam sekitar: Pencahayaan ambien | Incandescent light: 10,000 liter x or less at the light-receiving face |
| Rintangan alam sekitar: Suhu ambien | 0 to +50 ℃+32 to +122 ℉(No dew condensation allowed), Storage: -25 to +65 ℃-13 to +149 ℉ |
| Rintangan alam sekitar: Rintangan getaran | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Elemen pemancar: Jenis yang mematuhi peraturan FDA | Red semiconductor laser Class II (FDA)(modulated, max. output: 0.2 mW, peak emission wavelength: 650 nm0.026 mil)(IEC / JIS: Class 1) |
| Elemen pemancar: Jenis pematuhan piawaian IEC / JIS | Red semiconductor laser Class 1 (IEC / JIS)(modulated, max. output: 0.2 mW, peak emission wavelength: 650 nm0.026 mil) |
Penerangan Produk
HLT1 Series Analog Barrier Laser Emitter-Clevy, 1 mm Beam Width, 2 m Range
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
