


| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Jenis | High functionality type |
| Kabel | 14-core cabtyre cable with connector, 0.5 m1.640 ftlong |
| Catatan | Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃+68 ℉, sampling rate 500 μs, average number of samples: 1024, measurement center distance, object measured is made of white ceramic (specular reflection type: an aluminum vapor deposition surface reflection mirror) and analog measurement values. |
| Berat | Net weight: 70 g approx. (not including cable), 110 g approx. (including cable)Gross weight: 160 g approx. |
| Butiran | Sensor head (High functionality type) |
| Produk | Compact Laser Displacement Sensor |
| Bahan | Enclosure: PBTFront cover: AcrylicCable: PVC |
| Aksesori | Warning label: 1 set |
| Lineariti | ±0.2 % F.S. |
| Resolusi | 2.5 μm0.098 mil |
| Input berbilang | Zero set, zero set off, reset, memory switching, teaching, saving, and laser control according to the input time.In case NPN output is selected, Function varies according to the time 0 V is connected NPN.In case PNP output is selected, Function varies according to the time external power + is connected. |
| Nombor Bahagian | HL-G108A-RS-J |
| Sumber cahaya | Red semiconductor laser, Class 1 (IEC / EN / JIS / GB / KS / FDA (Note:This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3.Max. output: 0.39 mW (Peak emission wavelength: 655 nm0.026 mil) |
| Nama produk | Compact Laser Displacement Sensor HL-G1 |
| Input masa | NPN output operates when 0V is connected and NPN is set. (It depends on the setting.)PNP output operates when external power + is connected and PNP is set. (It depends on the setting.) |
| Diameter rasuk | 0.2 × 0.2 mm0.008 × 0.008 in(Note) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e2(13.5 %) of the center light intensity. Ifthere is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than thesensing point itself, then the results may be affected. |
| Kadar persampelan | 200 μs, 500 μs, 1 ms, 2 ms |
| Nombor Produk | HL-G108A-RS-J |
| Voltan bekalan | 24 V DC ± 10 % including ripple 0.5 V (P-P) |
| Sambungan kabel | Extension up to total 20 m65.617 ftis possible with optional cable (Cable for standard type cannot be extended) . |
| Paparan digital | Red LED 5 digit display |
| Julat pengukuran | ±10 mm±0.394 in |
| Petunjuk: Penggera | Orange LED lights up when this product cannot measure because of insuffienct or excessive light intensity. |
| Elemen penerima | CMOS image sensor |
| Ketinggian operasi | 2,000 m6561 ftor less |
| Penggunaan semasa | 100 mA or less |
| Tahap pencemaran | 2 |
| Rintangan penebat | 20 MOhm , or more, with 250 V DC between all supply teminals connected together and enclosure |
| Pematuhan peraturan | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Output analog: Arus | Output range: 3.2 to 20.8 mA (normal), 21.6 mA (alarm)Load impedance: 300 Ohm or less |
| Output analog: Voltan | Output range: 0 to +10.5 V (normal), 11 V (alarm)Output impedance: 100 Ohm |
| Antara muka komunikasi | RS-422 or RS-485 (selectable)Baud rate: 9,600/19,200/38,400/115,200/230,400/460,800/921,600 bpsData length 8 bit, Stop bit length 1 bit, Without parity check, BCC check, Termination code: CR |
| Ketahanan voltan | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Petunjuk: Pancaran laser | Green LED (lights up during laser emission) |
| Jarak pusat pengukuran | 82.9 mm3.264 in |
| Ciri-ciri suhu | ± 0.08 % F.S. / ℃ |
| Petunjuk: Julat pengukuran | Three yellow LED |
| Input tetapan kekutuban output | NPN open collector output operates when 0 V is connected.PNP open collector output operates when 24 V DC is connected. |
| Output (KELUAR 1, KELUAR 2, KELUAR 3) | Judgment output or alarm output (Setting can be selected.)Selectable NPN transistor open-collector or PNP transistor open-collector-Maximum sink current: 50 mA-Applied voltage: 3 to 24 V DC (between output and 0 V)-Residual voltage: 2 V or less (at 50 mA of sink current)-Maximum source current: 50 mA-Residual voltage: 2.8 V or less (at 50 mA of source current) |
| Rintangan alam sekitar: Perlindungan | IP67 |
| Rintangan alam sekitar: Kelembapan ambien | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Rintangan alam sekitar: Rintangan kejutan | 500 m/s2acceleration (50 G approx.) in X,Y and Z directions three times each |
| Rintangan alam sekitar: Pencahayaan ambien | Incandescent light: 3,000 liter x or less at the light-receiving face(Note) The fluctuation by ambient illuminance is ± 0.1 % F.S. or less. |
| Rintangan alam sekitar: Suhu ambien | -10 to +45 ℃+14 to +113 ℉(No dew condensation allowed), Storage: -20 to +60 ℃-4 to +140 ℉ |
| Rintangan alam sekitar: Rintangan getaran | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm0.059 indouble amplitude in X,Y and Z directions for two hours each |
| Output (OUT 1, OUT 2, OUT 3): Operasi output | Opened when the amount of light is insufficient. |
| Output (OUT 1, OUT 2, OUT 3): Perlindungan litar pintas | Incorporated (automatic restoration) |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi