Dalam Stok Produk Hangat
UHGTC101
UHGTC101 HG-TC101 PANASONIC HG-T Laser Displacement Sensor. High functionality master controller, NPN output
$0.00USD
4052 dalam stok
Spesifikasi Utama
:When communication unitis connected
Barang:Specifications
Kabel:0.2 mm22-core (brown and blue lead wires) / 0.15 mm27-core composite cable, 2 m6.562 ftlong
Butiran:Master unit / High performance type
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| When communication unitis connected | |
| Barang | Specifications |
| Kabel | 0.2 mm22-core (brown and blue lead wires) / 0.15 mm27-core composite cable, 2 m6.562 ftlong |
| Butiran | Master unit / High performance type |
| Produk | Controller |
| Bahan | Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal |
| Berat bersih | 140 g approx. |
| Nombor Bahagian | HG-TC101 |
| 1 hingga 7 unit | 1 to 6 units |
| Nama produk | Thru-beam Type Digital Displacement Sensor HG-T |
| 8 hingga 15 unit | 7 to 14 units |
| Julat paparan | -199.999 to 199.999 mm-7.874 to 7.874 in |
| Kadar persampelan | 1 ms (standard sampling) / 0.5 ms (high-speed sampling) |
| Nombor Produk | HG-TC101 |
| Voltan bekalan | 24 V DC ±10 %, including ripple 0.5 V (P-P) |
| Tahap pencemaran | 2 |
| Resolusi paparan | 1 μm0.039 mil |
| Ketinggian operasi | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Penggunaan semasa | 100 mA or less (when sensor head is connected)(Note) : Current consumption does not include analog current output. |
| Pematuhan peraturan | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Kepala sensor yang berkenaan | HG-T1010、HG-T1110 |
| Pensuisan input luaran | Input 1, Input 2, and Input 3 can be switched to "Preset / Reset / Trigger", "Bank Input A / Bank Input B / Select (Preset, Reset, Trigger)", or "Laser emission stop". |
| Pensuisan output luaran | Output 1, Output 2, and Output 3 can be switched to 3-value, 2-value, Logic, and Logic 2. |
| Kiraan purata (masa tindak balas) | 1 time (2 ms), 2 times (3 ms), 4 times (5 ms), 8 times (9 ms), 16 times (17 ms), 32 times (33 ms), 64 times (65 ms), 128 times (129 ms), 256 times (257 ms), 512 times (513 ms), and 1,024 times (1,025 ms) switching type(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| Bilangan unit hamba yang disambungkan | Maximum sink current and sourcecurrent of control output |
| Fungsi pencegahan gangguan | Incorporated(Note) : This function operates for each set of 4 connected controllers. |
| Rintangan alam sekitar: Perlindungan | IP40(IEC) |
| Output analog: Output arus analog | •Current output range: 4 to 20 mA/F.S. (default value)•Linearity: ±0.25 % F.S.•Output when alarm occurs: 0 mA•Load impedance: 250 Ω max.(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output. |
| Output analog: Output voltan analog | •Voltage output range: 1 to 5 V/F.S. (default value)•Linearity: ±0.05 % F.S.•Output when alarm occurs: 5.2 V•Output impedance: 100 Ω max.(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output. |
| Input luaran (Input 1, Input 2, Input 3) | Non-contact input or NPN open-collector transistor•Input conditionsInvalid: +8 V to +V DC or open, Valid: 0 to +1.2 V DC•Input impedance: 10 kΩ approx.Non-contact input or PNP open-collector transistor•Input conditionsInvalid: 0 to +0.6 V DC or open, Valid: +4 V to +V DC•Input impedance: 10 kΩ approx. |
| Bilangan maksimum pengawal yang boleh disambungkan | Up to 15 slave units can be connected to a master unit.(Note) : When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit. |
| Rintangan alam sekitar: Kelembapan ambien | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Rintangan alam sekitar: Rintangan kejutan | 98m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| Output kawalan (Output 1, Output 2, Output 3) | NPN open-collector transistor•Maximum sink current: 50 mA (Note)•Applied voltage: 30 V DC or less (between output and 0 V)•Residual voltage: 1.5 V or less (at 50 mA sink current)•Leakage current: 0.1 mA or lessPNP open-collector transistor•Maximum source current: 50 mA (Note)•Applied voltage: 30 V DC or less (between output and +V)•Residual voltage: 1.5 V or less (at 50 mA source current)•Leakage current: 0.1 mA or less(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10～+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| Rintangan alam sekitar: Suhu ambien | -10 to +50 ℃+14 to +122 ℉(No dew condensation or icing allowed) (Note), Storage: -20 to +60 ℃-4 to +140 ℉(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10～+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| Rintangan alam sekitar: Rintangan getaran | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude (10 to 58 Hz), Maximum acceleration 49 m/s2(58 to 150 Hz) in X, Y and Z directions for two hours each |
| Rintangan alam sekitar: Rintangan penebat | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Rintangan alam sekitar: Ketahanan voltan | 1,000 V AC for one minute between all supply terminals connected together and enclosure |
| Input luaran (Input 1, Input 2, Input 3): Masa input | • Trigger input: 2 ms or more (ON)• Laser emission stop input, preset input, reset input, bank input A/B(Note): 20 ms or more (ON)(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| Output kawalan (Output 1, Output 2, Output 3): Output penggera | Open when alarm occurs |
| Output kawalan (Output 1, Output 2, Output 3): Output penghakiman | N.O. / N.C. switching type |
| Output kawalan (Output 1, Output 2, Output 3): Perlindungan litar pintas | Incorporated (automatic reset type) |
Penerangan Produk
HG-TC101_Controller_Thru-beam Type Digital Displacement Sensor HG-T_Master unit / High performance type
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
