Dalam Stok Produk Hangat
UHGS1010AC
UHGS1010AC HG-S1010-AC PANASONIC HG-S Sensor for measurement by contact. Head sensor with pneumatic actuator..
$0.00USD
4292 dalam stok
Spesifikasi Utama
Barang:Specifications
Catatan:Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment.
Strok:10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point.
Berat:Net weight: 80 g approx.
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Catatan | Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment. |
| Strok | 10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| Berat | Net weight: 80 g approx. |
| Butiran | Air-driven type10 mm0.394 intype General purpose |
| Produk | Contact-Type Digital Displacement Sensor |
| Bahan | Body: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe (Note): Brass (body) / Ceramic (ball),, Air tube clamp: S60CM(Note) : The probe is also available as an option. |
| Aksesori | Sensor head fastening wrench: 1 pc., Mounting nut: 1 pc., Seal cap: 1pc, Air tube clamp: 1 pc. |
| Resolusi | 0.5 μm0.02 mil |
| Nombor Bahagian | HG-S1010-AC |
| Nama produk | Contact-Type Digital Displacement Sensor HG-S |
| Cecair yang boleh digunakan | Clean air (Dew point temperature: -10 ℃+14 ℉or less) |
| Kadar persampelan | 1 ms |
| Nombor Produk | HG-S1010-AC |
| Tiub yang berkenaan | Outside diameter: ø4 mmø0.157 in/ Inside diameter: ø2.5 mmø0.098 in |
| Daya pengukur | ・Measuring force changes with the air pressure used. Removing the seal cap enables the product to be used as the low measuring force type.・For the relationship between supplied air pressure and measuring force or between measuring force and pushed spindle position, see the figures below. For upward mount without a seal cap, subtract 0.2 N from the measuring force. For side mount, subtract 0.1 N from the measuring force. The following figures are only typical examples, and these relationships differ depending on the assembly accuracy of the product or the abrasion status of sealing materials. |
| Julat pengukuran | 10 mm0.394 in(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| Kaedah pembumian | Capacitor grounding |
| Tahap pencemaran | 2 |
| Fungsi pertukaran panas | Incorporated |
| Ketinggian operasi | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Penunjuk operasi | Equipped (2-color LED: Orange / Green) |
| Amaun sisihan hujung | 35 μm1.378 mil(typical value) |
| Pengawal yang berkenaan | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113(Note) : Be sure to use the sensor in combination with an HG-SC□ controller manufactured in or after February 2019. |
| Rintangan penebat | 100 MΩ or more at 250 V DC |
| Pematuhan peraturan | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Julat tekanan kerja | 0.14 to 0.16 MPaWith no seal cap mounted : 0.035 to 0.045 MPa |
| Ketepatan petunjuk (PP) | Full range: 2.0 μm0.079 milor lessLimited range: 1.0 μm0.039 milor less(any 60 μm2.362 mil) |
| Kaedah pengesanan kedudukan | Optical absolute linear encoder method |
| Keupayaan untuk menahan tekanan | 0.2 MPa |
| Rintangan alam sekitar: Perlindungan | IP67 (IEC)With no seal cap mounted : -(Note) : Protective structure is not applicable when the sealing portions have deteriorated or become damaged. The protection level is zero when the seal cap is removed. |
| Rintangan alam sekitar: Kelembapan ambien | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Rintangan alam sekitar: Rintangan kejutan | 1,960 m/s2acceleration in X, Y, and Z directions three times each |
| Rintangan alam sekitar: Suhu ambien | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +60 ℃-4 to +140 ℉ |
| Rintangan alam sekitar: Rintangan getaran | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (10 to 58 Hz), maximum acceleration 196 m/s2, (58 to 150 Hz) in X, Y, and Z directions for two hours each |
Penerangan Produk
HG-S - Contact measurement sensor. Sensor head with pneumatic actuator. Resolution 0.5μm. Precision 2μm. Range 10mm
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
