Dalam Stok Produk Hangat
UFX505C2
UFX505C2 FX-505-C2 PANASONIC Fiber amplifier, NPN, analogue output, double display
$0.00USD
4554 dalam stok
Spesifikasi Utama
Barang:Specifications
Kabel:0.2 mm26-core cabtyre cable, 2 m6.562 ftlong
Berat:Net weight: 60 g approx.Gross weight: 100 g approx.
Butiran:Cable type
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Kabel | 0.2 mm26-core cabtyre cable, 2 m6.562 ftlong |
| Berat | Net weight: 60 g approx.Gross weight: 100 g approx. |
| Butiran | Cable type |
| Produk | Digital Fiber Sensor |
| Bahan | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| Aksesori | FX-MB1 (Amplifier protection seal): 1 set |
| Perlindungan | IP40 (IEC) |
| Nombor Bahagian | FX-505-C2 |
| Nama produk | Digital Fiber Sensor FX-500 Ver.2 |
| Output analog | Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note) ]Response time: 2 ms or lessZero point: Within 4 mA plus or minus 1 % F.S.Span: Within 16 mA plus or minus 5 % F.S.Linearity: Within plus or minus 3 % F.S.Load resistance: 0 to 250 Ohm(Note) If display adjustment was conducted, it is not in this range. |
| Masa tindak balas | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| Input luaran | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +1.2 V DC(at 0.5 mA source current)- Input impedance: 10 kOhm approx. |
| Nombor Produk | FX-505-C2 |
| Voltan bekalan | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| Fungsi pemasa | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffectiveIncorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective |
| Sambungan kabel | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more) |
| Pelbagai tetapan | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| Penggunaan kuasa | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output) |
| Keluaran 1, Keluaran 2 | NPN open-collector transistor- Maximum sink current: 50 mA (Note 1)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (Note 2) (at maximum sink current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| Suhu ambien | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 12 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| Tetapan sensitiviti | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| Fungsi pemasa: Tempoh pemasa | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| Elemen pemancar (dimodulasi) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Pematuhan arahan penandaan CE | EMC Directive, RoHS Directive |
| Fungsi penetapan jumlah pelepasan | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| Fungsi pencegahan gangguan | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| Output 1, Output 2: Titik output | 2 points |
| Fungsi input luaran yang mungkin | Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable |
| Output 1, Output 2: Operasi output | Switchable either Light-ON or Dark-ON by L/D mode |
| Julat paparan keamatan cahaya insiden | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| Input luaran (boleh ditukar dengan Output 2) | - |
| Output 1, Output 2: Perlindungan litar pintas | Incorporated |
Penerangan Produk
FX-500 F Amplifier. Optical, analog output, 2 NPN outputs, dual display, high sensitivity and detection distance, ultra-fast
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
