Dalam Stok Produk Hangat
UFX501P
UFX501P FX-501P PANASONIC Fiber amplifier, PNP, 1 digital output, double display, connector type
$0.00USD
3186 dalam stok
Spesifikasi Utama
Barang:Specifications
Kabel:-
Keluaran:PNP open-collector transistor- Maximum source current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (Note 2) (at maximum source current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)
Berat:Net weight: 15 g approx.Gross weight: 70 g approx.
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Kabel | - |
| Keluaran | PNP open-collector transistor- Maximum source current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (Note 2) (at maximum source current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| Berat | Net weight: 15 g approx.Gross weight: 70 g approx. |
| Butiran | Standard type |
| Produk | Digital Fiber Sensor |
| Bahan | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| Aksesori | FX-MB1 (Amplifier protection seal): 1 set |
| Perlindungan | IP40 (IEC) |
| Nombor Bahagian | FX-501P |
| Nama produk | Digital Fiber Sensor FX-500 Ver.2 |
| Masa tindak balas | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| Input luaran | - |
| Nombor Produk | FX-501P |
| Voltan bekalan | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| Fungsi pemasa | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective |
| Sambungan kabel | - |
| Pelbagai tetapan | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| Penggunaan kuasa | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage) |
| Suhu ambien | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 16 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| Tetapan sensitiviti | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| Output: Titik output | 1 point |
| Output: Operasi output | Switchable either Light-ON or Dark-ON by L/D mode |
| Fungsi pemasa: Tempoh pemasa | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| Elemen pemancar (dimodulasi) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Pematuhan arahan penandaan CE | EMC Directive, RoHS Directive |
| Output: Perlindungan litar pintas | Incorporated |
| Fungsi penetapan jumlah pelepasan | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| Fungsi pencegahan gangguan | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| Fungsi input luaran yang mungkin | - |
| Julat paparan keamatan cahaya insiden | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| Input luaran (boleh ditukar dengan Output 2) | - |
Penerangan Produk
FX-500 Amplifier F. Optical, PNP output, dual display, high sensitivity and detection distance, ultra-fast.
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
