Dalam Stok Produk Hangat
UFX101Z
UFX101Z FX101Z FX-101-Z PANASONIC Fiber amplifier, Standard type, NPN, display, M8-connector type
$0.00USD
4586 dalam stok
Spesifikasi Utama
Barang:Specifications
Keluaran:NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current)
Berat:Net weight: 15 g approx.Gross weight: 35 g approx.
Butiran:Standard type
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Keluaran | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current) |
| Berat | Net weight: 15 g approx.Gross weight: 35 g approx. |
| Butiran | Standard type |
| Produk | Digital Fiber Sensor |
| Bahan | Enclosure: PolycarbonateKey switch: PolycarbonateFiber lock lever: PBT |
| Aksesori | FC-FX-1(Protection cover): 1 pc.(Note) Protection cover FC-FX-1 has been attached from the production at July, 2011. |
| Nombor Bahagian | FX-101-Z |
| Panjang kabel | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Nama produk | Digital Fiber Sensor FX-100 |
| Masa tindak balas | Emission frequency 0: 250 micro s or less (factory default setting)Emission frequency 1: 450 micro s or lessEmission frequency 2: 500 micro s or lessEmission frequency 3: 600 micro s or less |
| Input luaran | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +2 V DC(Source current 0.5 mA or less)- Input impedance: 10 kOhm approx. |
| Nombor Produk | FX-101-Z |
| Voltan bekalan | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Fungsi pemasa | ON-delay / OFF-delay timer, switchable either effective or ineffective[Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] |
| Paparan digital | 4 digits (green) + 4 digits (red) LCD display |
| Kelembapan ambien | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Rintangan kejutan | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| Kaedah sambungan | Connector(Note) Connector attached cable CN-14A-C2 is not attached to the models that have no ''-CC2'' at the end of the model Nos.Make sure to use the optional connector attached cable CN-14A(-R)-Cx or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd.(contact: SPHD-001T-P0.5, housing: PAP-04V-S). |
| Penggunaan kuasa | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
| Pencahayaan ambien | Incandescent light: 3,000 lx or less at the light-receiving face |
| Suhu ambien | –10 to +55 ℃+14 to +131℉(If 4 to 7 units are mounted close together: –10 to +50 ℃+14 to +122℉, if 8 to 16 units are mounted close together: –10 to +45 ℃+14 to +113℉) (No dew condensation or icing allowed),Storage: –20 to +70 ℃–4 to +158℉ |
| Penunjuk operasi | Orange LED (lights up when the output is ON) |
| Tetapan sensitiviti | 2-point teaching / Limit teaching / Full-auto teaching |
| Rintangan getaran | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Rintangan penebat | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Output: Operasi output | Selectable either Light-ON or Dark-ON, at SET mode |
| Ketahanan voltan | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Elemen pemancar (dimodulasi) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Pematuhan arahan penandaan CE | EMC Directive, RoHS Directive |
| Output: Perlindungan litar pintas | Incorporated |
| Fungsi penetapan jumlah pelepasan | 3-level + Auto setting (from production in December 2007) |
| Fungsi pencegahan gangguan | Incorporated Emission frequency selection method (Functions at emission frequency 1, 2 or 3)(Note) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values.However, the interference prevention function does not operate at emission frequency 0 (factory default setting). |
| Fungsi pelarasan sensitiviti halus | Incorporated |
Penerangan Produk
FX100 Amplifier F. Optical, NPN output, includes M8 connector
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
