


| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Keluaran | PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.0 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current) |
| Butiran | Chemical-resistant |
| Produk | Leak Detection Sensor |
| Bahan | Enclosure: PFA |
| Perlindungan | IP67 (IEC) |
| Nombor Bahagian | EX-F62-PN |
| Nama produk | Leak Detection Sensor EX-F70/EX-F60 |
| Masa tindak balas | 50 ms or less |
| Nombor Produk | EX-F62-PN |
| Objek pengesan | Agent, such as Sulfuric acid, Hydrochloric acid, Phosphoric acid or Ammonia etc.Note : Highly viscous liquid may not be detected stably.Note : The agents mentioned above are examples. For details, please contact our office.Note : PVC mounting bracket may not be used depending on type or viscosity etc. of the agent. For details, please contact our office. |
| Voltan bekalan | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Sambungan kabel | Extension up to total 50 m164.042 ft |
| Penunjuk KEROSAKAN | Red LED (lights up when the leak liquid is detected, or the sensor is mounted improperly) |
| Kelembapan ambien | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Unsur pemancar | Infrared LED (non-modulated) |
| Penunjuk NORMAL | Green LED (lights up when the sensor is mounted properly) |
| Pencahayaan ambien | Incandescent light: 1,000 ℓx or less at the light-receiving face |
| Suhu ambien | -10 to +60 ℃+14 to +140 ℉(No dew condensation or icing allowed), Storage: -20 to +70 ℃- 4 to +158 ℉Note : Liquid being detected should also be kept within the rated ambient temperature range. |
| Penggunaan semasa | 15 mA or less |
| Output: Operasi output | In normal state: ON, When leak detected or the sensor is mounted improperly: OFF |
| Output: Perlindungan litar pintas | Incorporated |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi