


| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| Kabel | Suitable for round cable φ9 to φ11 mmφ0.354 to φ0.433 in |
| Keluaran | Relay contact 1a- Switching capacity: 2 50 V AC 3 A (resistive load), 30 V DC 3 A (resistive load)- Electrical life: 100,000 or more switching operations (switching frequency 1,200 operations/hour)- Mechanical life: 50 million or more switching operations (switching frequency 18,000 operations/hour) |
| Berat | Net weight: 100 g approx. |
| Butiran | Multi-voltage [With timer] |
| Produk | Adjustable Range Reflective Photoelectric Sensor |
| Bahan | Enclosure: ABSFront cover: PolycarbonateDisplay cover: Polycarbonate |
| Aksesori | Adjusting screwdriver: 1 pc. |
| Histeresis | 10 % or less of operation distance(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
| Perlindungan | IP67 (IEC) |
| Nombor Bahagian | EQ-502T |
| Panjang kabel | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cabtyre cable. |
| Nama produk | Adjustable Range Reflective Photoelectric Sensor EQ-500 |
| Mod pengesanan | - |
| Masa tindak balas | 20 ms or less (depends on the setting timer period) |
| Nombor Produk | EQ-502T |
| Voltan bekalan | 24-240 V AC ±10 % or 12 to 240 V DC ±10 %Ripple P-P 10 % or less |
| Fungsi pemasa | Incorporated with variable (0.1 to 5 sec.) ON-delay/OFF-delay timer |
| Julat boleh laras | 0.2 to 1.0 m0.656 to 3.281 ft(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m0.328 ft, or more, away.(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
| Kelembapan ambien | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Unsur pemancar | Infrared LED (Peak emission wavelength: 855 nm0.034 mil, modulated) |
| Rintangan kejutan | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Kaedah sambungan | Screw-on terminal connection |
| Pelaras jarak | 2-turn mechanical adjuster with indicator |
| Elemen penerima | 2-segment photodiode |
| Pencahayaan ambien | Incandescent light: 3,000 Lx or less at the light-receiving face |
| Suhu ambien | –20 to +55 ℃–4 to +131℉(No dew condensation or icing allowed),Storage: –30 to +70 ℃–22 to +158℉ |
| Penunjuk operasi | Orange LED (lights up when the output is ON) |
| Penunjuk kestabilan | Green LED (lights up under stable operating condition) |
| Rintangan getaran | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Rintangan penebat | 100 MOhm , or more, with 500 V DC megger among supply terminals, non-supply metal parts and relay contact output terminals as well as between relay contacts |
| Output: Operasi output | Switchable either Detection-ON or Detection-OFF |
| Ketahanan voltan | 2,000 V AC for one min. among supply terminals, non-supply metal parts and relay contact output terminals, 1,000 V AC for one min. between relay contacts |
| Penggunaan kuasa / arus | AC: 5 VA or lessDC: 4 W or less |
| Pematuhan arahan penandaan CE | Low Voltage Directive, EMC Directive, RoHS Directive |
| Output: Perlindungan litar pintas | - |
| Fungsi pencegahan gangguan automatik | Incorporated(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. |
| Julat pengesanan (pada jarak tetapan maksimum) | 0.1 to 1.0 m0.328 to 3.281 ft(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi