

| Parameter | Nilai |
|---|---|
| 33 V AC (2 A) | |
| Fius | 2x 2.5 A on PCB, slow-blow (replaceable) |
| Kedalaman | 160 mm |
| Kejutan | 15g, according to IEC˽60068-2-27 |
| Lebar | 322 mm |
| Ketinggian | ≤ 2000 m |
| Jeneral | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Penebat | Basic insulation |
| Nama keluaran | Switching output |
| Jenis produk | Module carrier |
| Arus input | ≤ 2 A |
| Jenis pemasangan | DIN rail mounting |
| Pengenalpastian | UL 61010 Listed |
| Paparan status | 2x green LEDs (PWR1 and PWR2) |
| Tahap pencemaran | 2 |
| Bekalan berlebihan | yes, decoupled from diodes |
| Panjang pelucutan | 7 mm |
| Kaedah sambungan | Screw connection |
| Kedudukan pemasangan | vertical, horizontal |
| Kad I/O yang sesuai | NFAI143 |
| Voltan nominal UN | < 50 V DC (Per signal/channel) |
| Bilangan jawatan | 6 |
| Voltan lonjakan yang dinilai | 0.5 kV |
| Tahap perlindungan | IP00 |
| Kategori voltan lampau | III |
| Arahan pemasangan | No end clamp |
| Bilangan sambungan | 1 |
| Piawaian/peraturan | DIN EN 50178 |
| Getaran (operasi) | 2g, according to IEC 60068-2-6 |
| Jenis pensuisan kenalan | 1 N/C contact (alarm = open) |
| Arus maksimum yang dibenarkan | 1 A (Signal/channel) |
| Voltan penebat yang dinilai | 50 V |
| Voltan pensuisan maksimum | 30 V DC (2 A) |
| Keratan rentas konduktor AWG | 24 ... 12 |
| Keratan rentas konduktor tegar | 0.14 mm² ... 2.5 mm² |
| Suhu ambien (operasi) | -20 °C ... 70 °C (For use at an ambient temperature of up to 70°C: the MACX MCR-SL-RPSSI-2I modules must be mounted 5 mm apart. Use the CLIPFIX 35-5 end brackets provided as spacers.) |
| Keratan rentas konduktor fleksibel | 0.14 mm² ... 2.5 mm² |
| Kelembapan yang dibenarkan (operasi) | 5 % ... 95 % (non-condensing) |
| Perlindungan polarisasi dan lonjakan | Yes |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
| Suhu ambien (penyimpanan/pengangkutan) | -40 °C ... 80 °C (Please observe module specifications) |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi