Dalam Stok Produk Hangat
STEP3-PS/1AC/5DC/3/PT/USB-A
STEP3-PS/1AC/5DC/3/PT/USB-A 1335699 PHOENIX CONTACT Primary Switching Power Supplies, STEPPOWER, Push-in Con..
$53.87USD
227 dalam stok
Spesifikasi Utama
:230 V AC
Kedalaman:61 mm
Input:asymmetrical 2 kV (Test Level 3)
Lebar:18 mm
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| 230 V AC | |
| Kedalaman | 61 mm |
| Input | asymmetrical 2 kV (Test Level 3) |
| Lebar | 18 mm |
| tegar | 0.2 mm² ... 2.5 mm² |
| Ketinggian | 90 mm |
| Keluaran | asymmetrical 2 kV (Test Level 3) |
| Voltan | 10 V (Test Level 3) |
| Komen | Criterion A |
| Penurunan | > 50 °C ... 70 °C (2 % / K) |
| Kedudukan | 1.x |
| fleksibel | 0.2 mm² ... 2.5 mm² |
| Kekerapan | 50 Hz |
| Masa naik | typ. 100 ms (UOut= 10 % ... 90 %) |
| EN 61010-1 | II (≤ 4000 m) |
| EN 62477-1 | III (≤ 2000 m) |
| Kecekapan | > 81.5 % (120 V AC) |
| Kriteria A | Normal operating behavior within the specified limits. |
| Kriteria B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Kriteria C | Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements. |
| Penurunan voltan | 70 % |
| tegar (AWG) | 24 ... 14 (Cu) |
| Faktor puncak | typ. 3.3 |
| Input/Output | asymmetrical |
| Jenis produk | Power supply |
| Jenis pemasangan | DIN rail or direct mounting |
| Kalis tanpa beban | yes |
| Pengenalpastian | UL 1310 Class 2 Power Units |
| Arus masuk | typ. 30 A (25 °C) |
| Pelepasan hingar | EN 55016 |
| Kekebalan bunyi bising | Immunity in accordance with EN 61000-6-2 (industrial) |
| Keluarga produk | STEP POWER |
| Masa menghidupkan | typ. 2 s |
| Teks tambahan | Class 3 |
| Julat frekuensi | 0 kHz ... 2 kHz |
| Riak sisa | typ. 80 mVPP |
| Pelepasan di udara | 8 kV (Test Level 3) |
| Padang mendatar | 1 Div. (DIN 43880) |
| Bahan perumahan | Plastic |
| Ketinggian maksimum | ≤ 4000 m (> 2000 m, Derating: 10 %/1000 m) |
| Bilangan fasa | 1.00 |
| Penandaan kedudukan | 1.1, 1.2 (L), 1.3, 1.4 (N) |
| Kelas perlindungan | II (in closed control cabinet) |
| Ambang isyarat | > 0.9 x UN(UN= 5 V DC) (LED lights up green) |
| Panjang pelucutan | 10 mm (rigid/flexible/ferrule without plastic sleeve) |
| Kaedah sambungan | Push-in connection |
| Pelepasan sentuhan | 6 kV (Test Level 3) |
| Penyimpangan kawalan | < 1.5 % (Static load change 10 % ... 90 %) |
| Fius utama peranti | 1.25 A internal (device protection), slow-blow |
| Kedudukan pemasangan | horizontal DIN rail NS 35, EN 60715 |
| Bilangan tempoh | 25 periods |
| Kuasa output (PN) | 15 W |
| Kejutan (pembedahan) | 18 ms, 30g, per spatial direction (IEC 60068-2-27) |
| Jenis-jenis isyarat | LED |
| Penggunaan semasa | 0.3 A (100 V AC) |
| Tahap pencemaran | 2 |
| Lukisan dimensi | |
| Bahan selak kaki | Polyamid |
| Julat voltan input | 100 V AC ... 240 V AC -15 % ... +10 % |
| Kalis litar pintas | yes |
| Kekuatan medan ujian | 10 V/m (Test Level 3) |
| Sambungan secara siri | yes, for increased output voltage |
| Tahap perlindungan | IP20 |
| Julat frekuensi (fN) | 50 Hz ... 60 Hz ±10 % |
| Masa penimbal utama | typ. 18 ms (120 V AC) |
| Penamaan piawai | Electrical safety |
| Arahan pemasangan | alignable: 0 mm horizontally, 30 mm vertically |
| Pelepasan gangguan | Interference emission in accordance with EN 61000-6-3 (residential and commercial) and EN 61000-6-4 (industrial) |
| Arahan Voltan Rendah | Conformance with Low Voltage Directive 2014/35/EC |
| Piawaian/peraturan | EN 61000-3-2 |
| Getaran (operasi) | < 15 Hz, amplitude ±2.5 mm (IEC 60068-2-6) |
| Sambungan secara selari | yes, for increasing power and redundancy with diode |
| Voltan keluaran nominal | 5 V DC |
| Arus nyahcas ke PE | < 0.25 mA |
| Dengan lapisan pelindung | No |
| Pelepasan hingar yang dialirkan | EN 55016 |
| Piawaian/spesifikasi | IEC 61010-1 (SELV) |
| MTBF (IEC 61709, SN 29500) | > 2428000 h (25 °C) |
| Rintangan voltan maklum balas | ≤ 10 V DC |
| Arus keluaran nominal (IN) | 3 A |
| Konfigurasi sistem bekalan | Star network (TN, TT, IT (PE)) |
| Beban nominal kehilangan kuasa maksimum. | < 3.4 W (230 V AC) |
| Keserasian elektromagnetik | Conformance with EMC Directive 2014/30/EU |
| Kamiran arus masuk (I2t) | typ. 0.14 A2s |
| Voltan grid kebangsaan biasa | 120 V AC |
| Jenis voltan bekalan | AC |
| Suhu ambien (operasi) | -10 °C ... 70 °C (Derating: > 50 °C; 2 %/K) |
| Input/output voltan penebat | 4 kV AC (type test) |
| Jarak pemasangan kanan/kiri | 0 mm / 0 mm |
| Jarak pemasangan atas/bawah | 30 mm / 30 mm |
| Pelesapan kuasa tanpa beban maksimum | < 0.1 W (230 V AC) |
| Pelesapan kuasa tanpa beban minimum | < 0.1 W (120 V AC) |
| Arahan perlindungan alam sekitar | RoHS Directive 2011/65/EU |
| Penarafan mudah terbakar mengikut UL 94 | V0 (Housing, terminal blocks, base latches) |
| Pelesapan kuasa beban nominal minimum | < 3.5 W (120 V AC) |
| Suhu ambien (penyimpanan/pengangkutan) | -40 °C ... 85 °C |
| Pemutus yang disyorkan untuk perlindungan input | 6 A ... 16 A (Characteristics B, C, D, K) |
| fleksibel dengan ferrule dengan sarung plastik | 0.2 mm² ... 1 mm² |
| Suhu ambien (jenis permulaan diuji) | -25 °C |
| fleksibel dengan ferrule tanpa sarung plastik | 0.5 mm² ... 1.5 mm² |
| Kelembapan relatif maksimum yang dibenarkan (operasi) | ≤ 95 % (at 25 °C, non-condensing) |
| Perlindungan terhadap voltan lampau pada output (OVP) | < 10 V DC |
Penerangan Produk
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, Integrated cable groove with strain relief, input: 1-phase, output: 5 V DC / 3 A, USB-A up to 15 W
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
