Dalam Stok Produk Hangat
SPTAF 1/ 4-5,0-EL MCBU-YE
SPTAF 1/ 4-5,0-EL MCBU-YE 1031470 PHOENIX CONTACT Terminal for printed circuit board, rated voltage: 320 V, ..
$0.00USD
3761 dalam stok
Spesifikasi Utama
:0.34 mm² ... 1.5 mm² (Push-in connection)
Langkah:5 mm
Keputusan:Approved Test
Amplitud:0.35 mm (10 Hz ... 60.1 Hz)
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| 0.34 mm² ... 1.5 mm² (Push-in connection) | |
| Langkah | 5 mm |
| Keputusan | Approved Test |
| Amplitud | 0.35 mm (10 Hz ... 60.1 Hz) |
| Lebar [l] | 20 mm |
| kekerapan | 10 - 150 - 10 Hz |
| Tinggi [t] | 12.8 mm |
| Panjang [l] | 11 mm |
| Reka Bentuk Pin | Linear double pin arrangement |
| Pemerhatian | WEEE/RoHS compliant, filament-free according to IEC 60068-2-82/JEDEC JESD 201 |
| Panjang Kupas | 8 mm |
| Kelajuan sapuan | 1 octave/min |
| Suhu | 850 °C |
| Pecutan | 5g (60.1 Hz ... 150 Hz) |
| Barisan Produk | COMBICON Terminals S |
| Jenis Produk | Printed Circuit Board Terminal |
| Diameter lubang | 1.1 mm |
| Ulasan Artikel | 01 |
| Bilangan baris | 1 |
| Ketinggian Keseluruhan | 10.2 mm |
| Keluarga Produk | SPTAF 1/.. -THE |
| Warna (Perumahan) | Multicolor () |
| Jenis sambungan | Push-in spring connection |
| Bahagian Nominal | 1.5 mm² |
| Bilangan tiang | 4 |
| Arahan Ujian | X, Y, and Z axes |
| Bahan sentuh | Cu Alloy |
| Skim Dimensi | |
| Masa Persembahan | 5 s |
| Jenis pemasangan | Wave soldering |
| Dimensi Kuil | 0.75 x 0.3 mm |
| Jenis pembungkusan | Boxed Packaging |
| Arus Nominal IN | 16 A |
| Voltan nominal UN | 320 V |
| Spesifikasi Ujian | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| Bahan penebat | PA |
| Panjang Pin Kimpal [P] | 2.6 mm |
| Bilangan potensi | 4 |
| Jarak antara rod | 5 mm |
| Seksyen Konduktor AWG | 24 ... 16 |
| Bilangan sambungan | 4 |
| Voltan nominal (II/2) | 630 V |
| Voltan saiz (III/3) | 250 V |
| Tempoh ujian setiap paksi | 2.5 h |
| Bahagian konduktor tegar | 0.2 mm² ... 1.5 mm² (In the connection and possible alignment of a rigid 1.5 mm² conductor, mechanical transverse forces that may affect the terminal block must be absorbed by means of a lateral stabilizer.) |
| Ciri-ciri Permukaan | Malleable cast iron tinning |
| Keperluan ujian pemanasan | The sum of the ambient temperature and the heating of the PCB connection terminal cannot exceed the upper limit temperature. |
| Nota mengenai permohonan itu | Maximum Accepted Cable Insulation Outer Diameter ≤ 3 mm |
| Kumpulan bahan penebat | I |
| CTI mengikut IEC 60112 | 600 |
| Bahagian konduktor fleksibel | 0.2 mm² ... 1.5 mm² |
| Voltan dimensi (III/2) | 320 V |
| Suhu Ambien (Perkhidmatan) | -40 °C ... 100 °C (depending on the rating curve) |
| Suhu Ambien (Pemasangan) | -5 °C ... 100 °C |
| Voltan sementara nominal (II/2) | 4 kV |
| Voltan Penebat Saiz (II/2) | 630 V |
| Voltan sementara nominal (III/2) | 4 kV |
| Voltan sementara nominal (III/3) | 4 kV |
| Voltan Penebat Saiz (III/2) | 320 V |
| Voltan Penebat Saiz (III/3) | 250 V |
| Nilai garisan rayapan minimum (II/2) | 3.2 mm |
| Kawasan kimpalan permukaan logam (lapisan atas) | Tin (2 - 4 μm Sn) |
| Nilai garisan rayapan minimum (III/2) | 1.6 mm |
| Nilai garisan rayapan minimum (III/3) | 3.2 mm |
| Bilangan Pin Pateri Setiap Potensi | 2 |
| Tiang Bersebelahan Rintangan Penebat | > 5 MΩ |
| Voltan sementara dimensi (II/2) | 4 kV |
| Kelas mudah terbakar mengikut UL 94 | V0 |
| Voltan Sementara Pendimensian (III/2) | 4 kV |
| Voltan sementara dimensi (III/3) | 4 kV |
| Suhu Ambien (Penyimpanan/Pengangkutan) | -40 °C ... 70 °C |
| Permukaan logam titik terminal (lapisan atas) | Tin (2 - 4 μm Sn) |
| Kelembapan relatif udara (penyimpanan/pengangkutan) | 30 % ... 70 % |
| Suhu ujian kekerasan bola mengikut EN 60695-10-2 | 125 °C |
| Rintangan terhadap arus bocor (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Bahagian konduktor fleksibel dengan penutup jari kaki, dengan sarung plastik | 0.25 mm² ... 0.75 mm² (Connection of conductors with open terminal point) |
| Bahagian konduktor fleksibel dengan penutup jari kaki, tanpa sarung plastik | 0.25 mm² ... 0.75 mm² (Connection of conductors with open terminal point) |
| Nilai Minimum Jarak Penebat Udara - Medan Tidak Homogen (II/2) | 3 mm |
| Nilai Minimum Jarak Penebat Udara - Medan Tidak Homogen (III/2) | 3 mm |
| nilai minimum jarak penebat udara - medan bukan homogen (III/3) | 3 mm |
| Bahagian Konduktor/Jenis Konduktor/Daya Tegangan Nilai Nominal/Nilai Sebenar | 0.2 mm² / rigid / > 10 N |
| Nombor kemudahbakaran filamen pijar GWFI mengikut EN 60695-2-12 | 850 |
| Suhu penyalaan filamen pijar GWIT mengikut EN 60695-2-13 | 775 |
Penerangan Produk
Terminal block for printed circuit board, nominal current: 16 A, dimensioning voltage (III/2): 320 V, nominal section: 1.5 mm², Number of potentials: 4, Number of rows: 1, Number of poles per row: 4,
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
