![SF4D-H56-01 - SF4D-H56-01 PANASONIC Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D](http://www.baigongbaohao.com/pic/684/772/sf4d-h56-01.jpg)
Dalam Stok Produk Hangat
SF4D-H56-01
SF4D-H56-01 PANASONIC Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D
$0.00USD
4607 dalam stok
Spesifikasi Utama
Barang:Specifications
PFHD:2.78×10-9
MTTFD:426 years or more
Catatan:Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃+68 ℉.PFHD: Probability of Dangerous Failure per Hour, MTTFD: Mean Time to Dangerous Failure (in years).
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| PFHD | 2.78×10-9 |
| MTTFD | 426 years or more |
| Catatan | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃+68 ℉.PFHD: Probability of Dangerous Failure per Hour, MTTFD: Mean Time to Dangerous Failure (in years). |
| Butiran | Min. sensing object ø25 mmø0.984 in(20 mm0.787 inbeam pitch) |
| Produk | Safety Light Curtain [Type 4 PLe SIL3] |
| Bahan | Enclosure : Aluminum, Detection surface : Polycarbonate resin and stainless steel (SUS304), Upper cap / lower cap : Nylon |
| Aksesori | SF4B-TR25 (test rod) : 1 pc. |
| Nombor Bahagian | SF4D-H56-01 |
| Nama produk | Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D |
| Keadaan keselamatan | Control output (OSSD 1 / 2) OFF state |
| Voltan kuasa | 24 V DC+20-30 %Ripple P-P 10 % or less (excluding voltage drop due to cable)(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline. |
| Nombor Produk | SF4D-H56-01 |
| Jenis subsistem | Type B (IEC 61508-2) |
| Sambungan kabel | Total length of emitter / receiver can be extended up to 70 m229.659 fteach using optional mating cable (including the lengthof series mating cables)(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline. |
| Fungsi meredam | Incorporated (12-core cable) |
| Julat operasi | Short mode : 0.2 to 9 m0.656 to 29.528 ftLong mode : 0.8 to 15 m2.625 to 49.213 ft(selectable by DIP switch)(Note): The operating range is the possible setting distance between the emitter and the receiver. |
| Kelembapan ambien | 30 to 85 % RH, Storage : 30 to 95 % RH |
| Unsur pemancar | Infrared LED (peak emission wavelength : 850 nm0.0335 mil) |
| Tahap pencemaran | 3 |
| Rintangan kejutan | 300 m/s2acceleration (30 G approx.) in X, Y, and Z directions three times eachMalfunction resistance 100 m/s2acceleration (10 G approx.) in X, Y, and Z directions 1,000 times each |
| Kaedah penyambungan | By connector |
| Fungsi ganti | Incorporated (12-core cable) |
| Ketinggian pelindung | 1,110 mm43.701 in(Note): When using as a safety device for a press machine in China or when using SF4D-□-01 as a safety device for a press machine or paper shearing machine in Japan, the length from the center of the first beam channel to the center of the last beam channel become to be protective height. |
| Fungsi saling kunci | Incorporated [Manual reset / auto reset (selectable by wiring)] (8-core cable or 12-core cable) |
| Ketinggian operasi | 2,000 m6,561.68 ftor less(Note): Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| Fungsi pilihan | Optional functions cannot be used when SF4D-□-01 is used. |
| Pencahayaan ambien | Incandescent light : 5,000 ℓx or less at the light-receiving surface |
| Suhu ambien | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage : -25 to +60 ℃-13 to +140 ℉ |
| Penggunaan semasa | Emitter : 120 mA or lessReceiver : 140 mA or less |
| Objek pengesan minimum | ø25 mmø0.984 inopaque object(Note): When the floating blanking function is used, the size of the minimum sensing object varies. For the detail, refer to the section on Safety distance. |
| Fungsi penjimatan kuasa | Incorporated |
| Fungsi input ujian | Incorporated |
| Bilangan saluran pancaran | 56 |
| Rintangan getaran | 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions for two hours eachMalfunction resistance 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions twenty times each |
| Masa tindak balas kegagalan | Within response time (OFF response) |
| Rintangan penebat | 20 MΩ, or more, with 500 V DC megger, between all supply terminals connected together and enclosure |
| Kaedah penyegerakan | Line synchronization / optical synchronization (selectable by DIP switch) |
| Sudut apertur berkesan | ±2.5° or less at a sensing range of 3 m9.843 ftor longer (based on IEC 61496-2) |
| Fungsi pelepas penguncian | Incorporated |
| T1 (selang ujian bukti) | 20 years |
| Piawaian yang berkenaan: Jepun | JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3) |
| SFF (Pecahan Kegagalan Selamat) | 99% |
| Fungsi penunjuk aplikasi | Incorporated (only the receiver lights up when optical synchronization is used) |
| HFT (Toleransi Kerosakan Perkakasan) | 1 |
| Piawaian yang berkenaan: China (GB) | GB/T 4584 |
| Pematuhan arahan penandaan CE | Machinery Directive, EMC Directive, RoHS Directive |
| Piawaian yang berkenaan: Eropah (EU) | EN 61496-1/2 (Type 4), EN ISO 13849-1 (Category 4, PLe), EN 55011, EN 61000-6-2, EN 50178 |
| Output kawalan (OSSD 1, OSSD 2) | PNP open-collector transistor / NPN open collector transistor (selectable)<PNP output selected>・Maximum source current : 350 mA・Applied voltage : Same as supply voltage(between control output and +V)・Residual voltage : 2 V or less (source current 350 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)・Maximum load capacity : 2.2 μF・Load wiring resistance : 3 Ω or less<NPN output selected>・Maximum sink current : 350 mA・Applied voltage : Same as supply voltage(between control output and 0 V)・Residual voltage : 2 V or less (sink current 350 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)・Maximum load capacity : 2.2 μF・Load wiring resistance : 3 Ω or less |
| Fungsi pencegahan gangguan | <Not connected in series/parallel>・Line synchronization : 2 units or less (auto)・Optical synchronization : 2 units or less (selectable by DIP switch)<Connected in series/parallel>・Series connection : 5 units or less (total number of beam channels 256 or less)・Parallel connection : 3 units or less (total number of beam channels 192 or less)(Note)・Series / parallel connection mixed : 5 units or less (total number of beam channels 144 or less)(Note)(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| Piawaian yang berkenaan: Amerika Utara | ANSI/UL 61496-1/2 (Type 4),CAN/CSA C22.2 No.14, CAN/CSA E61496-1/2 |
| Fungsi pemantauan peranti luaran | Incorporated (8-core cable or 12-core cable) |
| Berat (Jumlah pemancar dan penerima) | 2,800g approx. |
| Output tambahan (AUX) (Output bukan keselamatan) | PNP open-collector transistor / NPN open collector transistor (selectable)<PNP output selected>・Maximum source current : 60 mA・Applied voltage : Same as supply voltage(between auxiliary output and +V)・Residual voltage : 2 V or less (source current 60 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)<NPN output selected>・Maximum sink current : 60 mA・Applied voltage : Same as supply voltage(between auxiliary output and 0 V)・Residual voltage : 2 V or less (sink current 60 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state) |
| Piawaian yang berkenaan: Piawaian antarabangsa | IEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3) |
| Output kawalan (OSSD 1, OSSD 2): Masa tindak balas | OFF response : 10 ms or less (Not connected in series / parallel), 18 ms or less (Connected in series / parallel)(Note 1)ON response : 50 ms or less (Note 2)(Note 3)(Note 1): For response times by number of beams, refer to the Control output (OSSD 1, OSSD 2) OFF response times.(Note 2): Because the control output (OSSD 1, OSSD 2) must be OFF for at least 80 ms, the ON response will be delayed more than 50 ms when the light blocked time is less than 30 ms.(Note 3): When optical synchronization is selected, if the beam axes of both the top end and bottom end are blocked, the ON response speed decreases by as much as 1 sec. |
| Rintangan alam sekitar: Tahap perlindungan | IP67, IP65 (IEC), NEMA Type 13 (NEMA 250) |
| Output kawalan (OSSD 1, OSSD 2): Mod operasi | ON when all beams are received, OFF when one or more beams are blocked(Also OFF when internal sensor error or synchronization signal error occurs)(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| Output kawalan (OSSD1, OSSD2): Litar perlindungan | Incorporated |
| Rintangan alam sekitar: Voltan kekuatan dielektrik | 1,000 V AC for one minute, between all supply terminals connected together and enclosure |
| Output tambahan (AUX) (Output bukan keselamatan): Masa tindak balas | OFF response : 60 ms or less, ON response : 60 ms or less |
| Output tambahan (AUX) (Output bukan keselamatan): Mod operasi | Control output ON : OFF, Control output OFF : ON(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| Output tambahan (AUX) (Output bukan keselamatan): Litar perlindungan | Incorporated |
| Ketinggian perlindungan: Apabila digunakan sebagai peralatan keselamatan untuk mesin akhbar Cina atau apabila digunakan untuk mesin akhbar Jepun atau mesin ricih kertas | 1,100 mm43.307 in(Note): When using as a safety device for a press machine in China or when using SF4D-□-01 as a safety device for a press machine or paper shearing machine in Japan, the length from the center of the first beam channel to the center of the last beam channel become to be protective height. |
Penerangan Produk
SF4D-H56-01_Safety Light Curtain [Type 4 PLe SIL3]_Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D_Min. sensing object ø25 mm ø0.984 in (20 mm 0.787 in beam pitch)
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
