Dalam Stok Produk Hangat
SF4C-H12-J05
SF4C-H12-J05 PANASONIC Ultra-slim Safety Light Curtain Typ4 (PLe SIL3), Hand Protection, protective height 2..
$0.00USD
3607 dalam stok
Spesifikasi Utama
Barang:Specifications
PFHD:1.90 × 10-9
Kabel:0.15 mm212-core heat-resistant PVC cable, 0.5 m1.640 ftlong with connector
MTTFD:100 years or more
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| PFHD | 1.90 × 10-9 |
| Kabel | 0.15 mm212-core heat-resistant PVC cable, 0.5 m1.640 ftlong with connector |
| MTTFD | 100 years or more |
| Butiran | Min. sensing object ø25 mmø0.984 intype (20 mm0.787 inbeam pitch) [Pigtailed type] |
| Produk | Ultra-slim Safety Light Curtain [Type 4 PLe SIL3] |
| Bahan | Enclosure: Polycarbonate alloySensing surface: Polycarbonate alloy |
| Padang rasuk | 20 mm0.787 in |
| Aksesori | MS-SFC-1 (Standard mounting bracket): 1 setSF4C-TR25 (Test rod): 1 No. |
| Nombor Bahagian | SF4C-H12-J05 |
| Nama produk | Ultra-slim Safety Light Curtain Type 4 PLe SIL3 SF4C |
| Fungsi ELCA | Incorporated (reducing mutual interference automatically) |
| Voltan kuasa | 24 V DC +10-15 % Ripple P-P 10 % or less |
| Masa tindak balas | OFF response: 7 ms or lessON response: 90 ms or less |
| Nombor Produk | SF4C-H12-J05 |
| Sambungan kabel | Extension up to 40.5 m132.874 ftis possible for both emitter and receiver, with 0.2 mm2or more cable.(Note) When the muting lamp is used, the cable can be extended within 30.5 m100.066 ft(for emitter / receiver). |
| Fungsi meredam | Incorporated |
| Julat operasi | 0.1 to 3 m0.328 to 9.843 ft(Note) The operating range is the possible setting distance between the emitter and the receiver. |
| Kelembapan ambien | 30 to 85 % RH, Storage: 30 to 85 % RH |
| Unsur pemancar | Infrared LED (Peak emission wavelength: 855 nm0.034 mil) |
| Tahap pencemaran | 3 |
| Rintangan kejutan | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| Fungsi ganti | Incorporated |
| Ketinggian pelindung | 240 mm9.449 in |
| Fungsi saling kunci | Incorporated [Manual reset / Automatic reset (Note)](Note) The manual reset and automatic reset are possible to be switched depending on the wiring status. |
| Ketinggian operasi | 2,000 m6,561 68 ftor less (Note：Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m.) |
| Fungsi pilihan | Fixed blanking, floating blanking, auxiliary output change, safety input (safety sensor), large multi-purpose indicator setting change, interlock setting change, external relay monitoring setting change, muting setting change, override setting change, protecting(Note) In case of using optional function, the handy-controller SFC-HC is required. |
| Pencahayaan ambien | Incandescent light: 5,000 lx or less at the light-receiving face |
| Suhu ambien | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: -25 to +60 ℃-13 to +140 ℉ |
| Objek pengesan minimum | ø25 mmø0.984 inopaque object(Note) When the floating blanking function is used, the size of the min. sensing object is changed. |
| Bilangan saluran pancaran | 12 |
| Rintangan getaran | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Rintangan penebat | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Fungsi input keselamatan | Incorporated (safety contact) |
| Sudut apertur berkesan | plus or minus 2.5℃ or less [for an operating range exceeding 3 m9.843 ft(conforming to IEC 61496-2 / ANSI/UL 61496-2)] |
| Piawaian yang berkenaan: Jepun | JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL 3) |
| Fungsi input ujian / tetapkan semula | Incorporated |
| Piawaian yang berkenaan: Eropah (EU) | EN 61496-1 (Type 4), EN ISO 13849-1 (Category 4, PLe), EN 61508-1 to 7 (SIL 3), EN 55011, EN 50178, EN 61000-6-2(Note) Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type examination certificate. |
| Output kawalan (OSSD 1, OSSD 2) | PNP open-collector transistor / NPN open-collector transistor (switching method)[When selecting PNP output]- Max. source current: 200 mA- Applied voltage: same as supply voltage (between the control output and +V)- Residual voltage: 2.5 V or less (source current 200 mA, when using 10 m32.808 ftlength cable)- Leakage current: 200 micro A or less (including power supply OFF condition)- Max. load capacity: 1 micro F (No load to Max. output current)- Load wiring resistance: 3 Ω or less[When selecting NPN output]- Max. sink current: 200 mA- Applied voltage: same as supply voltage (between the control output and 0 V)- Residual voltage: 2.5 V or less (sink current 200 mA, when using 10 m32.808 ftlength cable)- Leakage current: 200 micro A or less (including power supply OFF condition)- Max. load capacity: 1 micro F (No load to Max. output current)- Load wiring resistance: 3 Ω or less |
| Piawaian yang berkenaan: Amerika Utara | ANSI/UL 61496-1/2 (Type 4), ANSI/UL 508, UL 1998 (Class 2), CAN/CSA 61496-1/2 (Type 4), CAN/CSA C22.2 No.14,OSHA 1910.212, OSHA 1910.217(C), ANSI B11.1 to B11.19, ANSI/RIA 15.06(Note) With regards to the standards in the US, under the US regulation 29 CFR 1910.7, TÜV SÜD, a Nationally Recognized Testing Laboratory (NRTL) certified by OSHA, has certified with the safety certificate based on UL/ANSI standards. With regards to the standards in Canada, under the safety regulations based on CEC (Canadian Electric Code), TÜV SÜD America, a Certification Body accredited by SCC, has certified with the safety certificate based on CSA standards. |
| Fungsi pemantauan peranti luaran | Incorporated |
| Output tambahan (Output bukan keselamatan) | PNP open-collector transistor / NPN open-collector transistor (switching method)[When selecting PNP output]- Max. source current: 100 mA- Applied voltage: same as supply voltage (between the auxiliary output and +V)- Residual voltage: 2.5 V or less (source current 100 mA, when using 10 m32.808 ftlength cable)[When selecting NPN output]- Max. sink current: 100 mA- Applied voltage: same as supply voltage (between the auxiliary output and 0 V)- Residual voltage: 2.5 V or less (sink current 100 mA, when using 10 m32.808 ftlength cable) |
| Berat bersih (Jumlah pemancar dan penerima) | 300 g approx. |
| Piawaian yang berkenaan: Piawaian antarabangsa | IEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL 3) |
| Rintangan alam sekitar: Tahap perlindungan | IP67 / IP65 (IEC) |
| Output kawalan (OSSD 1, OSSD 2): Mod operasi | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the Safety Light Curtain or the synchronization signal)(Note) The outputs are not ''OFF'' when muting function is active even if the beam channel is interruped.(Note) In case the blanking function is valid, the operation mode is changed. |
| Output kawalan (OSSD1, OSSD2): Litar perlindungan | Incorporated |
| Output tambahan (Output bukan keselamatan): Mod operasi | OFF when control outputs are ON, ON when control outputs are OFF (Factory setting, operating mode can be changed using the SFC-HC handy-controller). |
| Rintangan alam sekitar: Voltan kekuatan dielektrik | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Output tambahan (Output bukan keselamatan): Litar perlindungan | Incorporated |
| Penggunaan semasa: Penunjuk pelbagai guna yang besar menyala | Emitter: 120 mA or lessReceiver: 140 mA or less |
| Penggunaan semasa: Lampu penunjuk pelbagai guna yang besar padam | Emitter: 70 mA or lessReceiver: 90 mA or less |
Penerangan Produk
More details
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
