Dalam Stok Produk Hangat
SF4B-A6(V2)
SF4B-A6(V2) SF4B-A6 V2 PANASONIC Safety light curtain type 4, version 2, arm protection, 230mm, PNP/NPN, con..
$0.00USD
4550 dalam stok
Spesifikasi Utama
Barang:Specifications
PFHD:1.5 × 10-9
MTTFD:100 years or more
Butiran:Min. sensing object ø45 mmø1.772 intype (40 mm1.575 inbeam pitch)
Maklumat Pembekal
PANASONIC
Produk: 4316
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Barang | Specifications |
| PFHD | 1.5 × 10-9 |
| MTTFD | 100 years or more |
| Butiran | Min. sensing object ø45 mmø1.772 intype (40 mm1.575 inbeam pitch) |
| Produk | Safety Light Curtain Type 4 |
| Bahan | Enclosure: AluminiumUpper and lower edges: IronSensing surface: Polycarbonate / Polyester resinCap: PBT |
| Nombor Bahagian | SF4B-A6(V2) |
| Panjang kabel | Total length up to 50 m164.042 ftis possible for both emitter and receiver, with optional mating cables(Note) The cable can be extended within 30 m98.425 ft(for emitter / receiver) when two light curtains are connected in series, within 20 m65.617 ftwhen three light curtains are connected in series. Furthermore, when the muting lamp is used, the cable can be extended within 40 m131.234 ft(for emitter / receiver). |
| Nama produk | Safety Light Curtain Type 4 SF4B Ver.2 |
| Voltan kuasa | 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Masa tindak balas | OFF response: 14 ms or less, ON response: 80 to 90 ms |
| Nombor Produk | SF4B-A6(V2) |
| Fungsi meredam | Incorporated(Note) Please use 12-core cable. |
| Julat operasi | 0.3 to 9 m0.984 to 29.528 ft(Note) The operating range is the possible setting distance between the emitter and the receiver. |
| Kelembapan ambien | 30 to 85 % RH, Storage: 30 to 95 % RH |
| Unsur pemancar | Infrared LED (Peak emission wavelength: 870 nm0.034 mil) |
| Rintangan kejutan | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| Kaedah penyambungan | Connector |
| Fungsi ganti | Incorporated(Note) Please use 12-core cable. |
| Ketinggian pelindung | 230 mm9.055 in(Note:In the case of "When used as safety device for presses in China", the distance between the center of the first beam axis and the center of the last beam axis of the device becomes the protective height. For details, refer to "Definition of sensing heights".) |
| Fungsi saling kunci | Incorporated [Manual reset / Auto reset (Note)](Note) The manual reset and auto reset are possible to be switched depending on the wiring status. |
| Fungsi pilihan | Fixed blanking, floating blanking, auxiliary output switching, interlock setting changing, external relay monitor setting changing, muting setting changing, protecting, light emitting amount control(Note) In case of using optional function, the handy-controller (SFB-HC) (optional) is required. However, a handy-controller cannot be used with the SF4B-x-01<V2> and the SF-C14EX-01. |
| Pencahayaan ambien | Incandescent light: 3,500 lx or less at the light-receiving face |
| Suhu ambien | -10 to +55 °+14 to +131 ℉(No dew condensation or icing allowed), Storage: -25 to +70 °-13 to +158 ℉ |
| Penggunaan semasa | Emitter: 65 mA or lessReceiver: 85 mA or less |
| Objek pengesan minimum | ø45 mmø1.772 inopaque object(Note) When the floating blanking function is used, the size of the min. sensing object is changed. |
| Bilangan saluran pancaran | 6 |
| Rintangan getaran | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Rintangan penebat | 20 MOhm , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Fungsi hentian pelepasan | Incorporated |
| Sudut apertur berkesan | plus or minus 2.5°or less [for an operating range exceeding 3 m9.843 ft(conforming to IEC 61496-2 / ANSI/UL 61496-2)] |
| Piawaian yang berkenaan: Jepun | JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3)(Note) PLe SIL3 compliant from production in August 2009. |
| Piawaian yang berkenaan: China (GB) | GB/T 4584(Note) PLe SIL3 compliant from production in August 2009. |
| Pematuhan arahan penandaan CE | Machinery Directive, EMC Directive, RoHS Directive |
| Piawaian yang berkenaan: Eropah (EU) | EN 61496-1 (Type 4), EN ISO 13849-1 (Category 4, PLe), EN 61508-1 to 7 (SIL3), EN 55011, EN 50178, EN 61000-6-2(Note) PLe SIL3 compliant from production in August 2009. |
| Output kawalan (OSSD 1, OSSD 2) | PNP open-collector transistor / NPN open-collector transistor (switching method)- When selecting PNP output: Max. source current 200 mA, When selecting NPN output: Max. sink current 200 mA- Applied voltage: same as supply voltage (When selecting PNP output: between the control output and +V, When selecting NPN output: between the control output and 0 V)- Residual voltage: 2.5V or less (When selecting PNP output: source current 200 mA, when selecting NPN output: sink current 200 mA) (when using 20 m65.617 ftlength cable) |
| Fungsi pencegahan gangguan | Incorporated(Note) Please use 12-core cable. |
| Piawaian yang berkenaan: Amerika Utara | ANSI/UL 61496-1/2 (Type 4), ANSI/UL 508, UL 1998 (Class 2), CAN/CSA 61496-1/2 (Type 4), CAN/CSA C22.2 No.14, OSHA 1910.212, OSHA 1910.217(C), ANSI B11.1 to B11.19, ANSI/RIA 15.06(Note) PLe SIL3 compliant from production in August 2009. |
| Fungsi pemantauan peranti luaran | Incorporated |
| Output tambahan (Output bukan keselamatan) | PNP open-collector transistor / NPN open-collector transistor (switching method)- When selecting PNP output: Max. source current 60 mA, When selecting NPN output: Max. sink current 60 mA- Applied voltage: same as supply voltage (When selecting PNP output: between the auxiliary output and +V, When selecting NPN output: between the auxiliary output and 0 V)- Residual voltage: 2.5V or less (When selecting PNP output: source current 60 mA, when selecting NPN output: sink current 60 mA) (when using 20 m65.617 ftlength cable) |
| Berat (Jumlah pemancar dan penerima) | 510 g approx. |
| Piawaian yang berkenaan: Korea Selatan (S-Mark) | S1-G-35-2005, S2-W-11-2003(Note) PLe SIL3 compliant from production in August 2009. |
| Piawaian yang berkenaan: Piawaian antarabangsa | IEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3)(Note) PLe SIL3 compliant from production in August 2009. |
| Rintangan alam sekitar: Tahap perlindungan | IP67 / IP65 (IEC) |
| Output kawalan (OSSD 1, OSSD 2): Mod operasi | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal)(Note) The outputs are not ''OFF'' when muting function is active even if the beam channel is interruped.(Note) In case the blanking function is valid, the operation mode is changed. |
| Output kawalan (OSSD1, OSSD2): Litar perlindungan | Incorporated |
| Output tambahan (Output bukan keselamatan): Masa tindak balas | OFF replay: 34 ms or less, ON replay 110 ms or less |
| Output tambahan (Output bukan keselamatan): Mod operasi | OFF when control outputs are ON, ON when control outputs are OFF (Factory setting; operating mode can be changed using the SFB-HC handy-controller(optional)). |
| Rintangan alam sekitar: Voltan kekuatan dielektrik | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Ketinggian pelindung: mematuhi China Press (GB/T 4584) | 200mm7.874 in |
| Output tambahan (Output bukan keselamatan): Litar perlindungan | Incorporated |
Penerangan Produk
More details
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
