

| Parameter | Nilai |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Pengekodan | B |
| Dilindungi | yes |
| Jenis kabel | INTERBUS [900] |
| Permohonan | Data |
| Reka bentuk kepala | Pin |
| Nota keselamatan | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Jenis sensor | INTERBUS |
| Jenis benang | M12 |
| Panjang kabel | 0.5 m |
| Berat kabel | 70 kg/km |
| Jenis produk | Circular connectors (device side) |
| Kelajuan isyarat | 0.66 c |
| Voltan ujian | 2500 V |
| Nota perhimpunan | With flat nut |
| Jenis pemasangan | Rear mounting M16 x 1.5 With flat nut |
| Keseluruhan kelainan | 3 pairs to the core |
| Bahan pengedap | FKM |
| Pasangan berpintal | 2 cores to the pair |
| Kapasiti kabel | ≤ 60 nF/km (At 800 Hz) |
| Impedans gelombang | 120 Ω ±20 % (at 64 kHz) |
| Talian isyarat AWG | 24 |
| Rintangan gelung | ≤ 159.80 Ω/km |
| Semakan artikel | 11 |
| Bahan sentuh | CuZn |
| Rintangan api | according to VDE 0472, Part 4, test type B |
| Jenis benang kepala | M12 |
| Kaedah sambungan | Cable connection |
| Soket kabel kepala | straight |
| Jenis penguncian kepala | SPEEDCON |
| Tork pengetatan | 2 Nm ... 3 Nm (Installation-side) |
| Bahan konduktor | Bare Cu litz wires |
| Rintangan sentuhan | ≤ 3 mΩ |
| Arus nominal IN | 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed) |
| Voltan nominal UN | 48 V AC |
| Nota tentang operasi | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Maklumat pesanan: | Lock nut is included in the scope of delivery |
| Pelemahan perisai | ≤ 15 dB/km (at 256 kHz) |
| Wayar tunggal, warna | green-yellow, white-brown, gray-pink |
| Struktur konduktor | 3 x 2 x 0.22 mm² |
| Rintangan gandingan | < 250.00 mΩ/m (at 30 MHz) |
| Tahap pencemaran | 3 |
| Lukisan dimensi | |
| Bilangan jawatan | 5 |
| Voltan lonjakan yang dinilai | 1.5 kV |
| Medium penghantaran | Copper |
| Tahap perlindungan | IP67 (When plugged in) |
| Bilangan soket kabel | 1 |
| Kategori voltan lampau | II |
| Penamaan piawai | M12 connector |
| Rintangan penebat | ≥ 100 MΩ |
| Sarung luaran, warna | may green RAL 6017 |
| Voltan nominal, kabel | 250 V (Peak value, not for high-power applications) |
| Sarung luar, bahan | PUR |
| Teras/Teras voltan ujian | 1500 Vrms |
| Keratan rentas konduktor | 3x 2x 0.22 mm² |
| Jenis sambungan kenalan | Pin |
| Diameter kabel luaran | 8.00 mm |
| Bahan pembawa sentuh | PA 6.6 |
| Bahan permukaan sentuh | Ni/Au |
| Penebat dawai bahan | PE |
| Piawaian/spesifikasi | IEC 61076-2-101 |
| Teras/Perisai voltan ujian | 1000.00 Vrms |
| Kitaran pemasukan/penarikan balik | > 100 |
| Bahan untuk sambungan skru | Brass, nickel-plated |
| Suhu ambien (operasi) | -40 °C ... 80 °C (cable, fixed installation) |
| Talian isyarat struktur konduktor | 32x 0.10 mm |
| Kapasiti beban dinamik (lenturan) | Max. bending cycles: 5000000, Bending radius: 120 mm, Traversing path: 10 m, Traversing rate: 1.6 m/s, Acceleration: 3.2 m/s² |
| Pelemahan crosstalk hampir hujung (NEXT) | ≥ 61 dB (at 772 kHz) |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
| Jejari lenturan minimum, pemasangan tetap | 7.5 x D |
| Jejari lenturan terkecil, pemasangan tetap | 60 mm |
| Jejari lenturan minimum, pemasangan fleksibel | 15 x D |
| Jejari lenturan terkecil, pemasangan boleh alih | 120 mm |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi