

| Parameter | Nilai |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Pengekodan | A |
| Dilindungi | yes |
| Jenis kabel | CANopen®/DeviceNet™, PUR, violet [920] |
| Reka bentuk kepala | Socket |
| Nota keselamatan | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Jenis sensor | CANopen® |
| Jenis benang | M12 |
| Panjang kabel | 5 m |
| Berat kabel | 90 kg/km |
| Bebas halogen | in accordance with DIN VDE 0472 part 815 |
| Jenis produk | Circular connectors (device side) |
| Gaya UL AWM | 21198 (80°C/300 V) |
| Jenis pemasangan | Rear mounting |
| Keseluruhan kelainan | 2 pairs around a drain wire in the center to the core |
| Bahan pengedap | FKM |
| Pasangan berpintal | 2 cores to the pair |
| Kapasiti kabel | nom. 40 nF/km (Data cable) |
| Impedans gelombang | 120 Ω ±10 % (with 1 MHz) |
| Talian isyarat AWG | 24 |
| Rintangan gelung | ≤ 181.80 Ω/km (Data cable) |
| Semakan artikel | 13 |
| Bahan sentuh | CuZn |
| Rintangan api | UL 1581, Section 1060 and UL 2556, Section 9.3 (FT1) |
| Jenis benang kepala | M12 |
| Rintangan lain | Low adhesion |
| Kaedah sambungan | Cable connection |
| Soket kabel kepala | straight |
| Jenis penguncian kepala | SPEEDCON |
| Tork pengetatan | 2 Nm ... 3 Nm (Installation-side) |
| Bahan konduktor | Tin-plated Cu litz wires |
| Arus nominal IN | 4 A |
| Voltan nominal UN | 48 V AC |
| Nota tentang operasi | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Maklumat pesanan: | Lock nut is included in the scope of delivery |
| Pelemahan perisai | ≤ 22.9 dB/km (with 1 MHz) |
| Wayar tunggal, warna | red-black, blue-white |
| Struktur konduktor | 2xAWG24/19+2xAWG22/19 |
| Tahap pencemaran | 3 |
| Lukisan dimensi | |
| Bilangan jawatan | 5 |
| Voltan lonjakan yang dinilai | 1.5 kV |
| Medium penghantaran | Copper |
| Tahap perlindungan | IP67 (When plugged in) |
| Bilangan soket kabel | 1 |
| Kategori voltan lampau | II |
| Penamaan piawai | M12 connector |
| Rintangan penebat | 100 MΩ |
| Sarung luaran, warna | red lilac RAL 4001 |
| Voltan nominal, kabel | ≤ 300 V (Peak value, not for high-power applications) |
| Sarung luar, bahan | PUR |
| Teras/Teras voltan ujian | 2000 V (50 Hz, 1 min.) |
| Jenis pelindung pasangan | Plastic-coated aluminum foil, aluminum side outside |
| Keratan rentas konduktor | 2x 0.25 mm² (Data cable) |
| Jenis sambungan kenalan | Socket |
| Diameter kabel luaran | 6.70 mm ±0.3 mm |
| Penutup perisai optik | 80 % |
| Bahan pembawa sentuh | PA 6.6 |
| Bahan permukaan sentuh | Ni/Au |
| Penebat dawai bahan | Foamed PE (Data cable) |
| Piawaian/spesifikasi | IEC 61076-2-101 |
| Teras/Perisai voltan ujian | 2000.00 V (50 Hz, 1 min.) |
| Kitaran pemasukan/penarikan balik | > 100 |
| Bahan untuk sambungan skru | Zinc die-cast, nickel-plated |
| Diameter dawai termasuk penebat | 1.95 mm ±0.05 mm (Data cable) |
| Suhu ambien (operasi) | -40 °C ... 80 °C (cable, fixed installation) |
| Talian isyarat struktur konduktor | 19x 0.13 mm |
| Kapasiti beban dinamik (lenturan) | Max. bending cycles: 5000000, Bending radius: 70 mm, Bending radius: 10 x D, Traversing path: 4.5 m, Traversing rate: 3 m/s, Acceleration: 3 m/s², Ambient temperature: -20 °C ... 60 °C |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
| Jejari lenturan minimum, pemasangan tetap | 5 x D |
| Jejari lenturan terkecil, pemasangan tetap | 34 mm |
| Jejari lenturan minimum, pemasangan fleksibel | 10 x D |
| Jejari lenturan terkecil, pemasangan boleh alih | 67 mm |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi