Dalam Stok Produk Hangat
SACC-SQ-M12MS-8CON-25F/0,5
SACC-SQ-M12MS-8CON-25F/0,5 1441561 PHOENIX CONTACT Sensor/Actuator flush-type plug, 8-pos., M12, A-coded, fr..
$22.93USD
466 dalam stok
Spesifikasi Utama
:-25 °C ... 85 °C (Cable, flexible installation)
Pengekodan:A
Jeneral:Contact connection method: Crimp connection
Dilindungi:no
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| -25 °C ... 85 °C (Cable, flexible installation) | |
| Pengekodan | A |
| Jeneral | Contact connection method: Crimp connection |
| Dilindungi | no |
| Jenis kabel | TPE litz wire |
| Permohonan | Signal |
| Reka bentuk kepala | Pin |
| Jenis benang | M12 |
| Panjang kabel | 0.5 m |
| Jenis produk | Circular connectors (device side) |
| Jenis pemasangan | Front mounting Square flange |
| Bahan pengedap | FKM |
| Talian isyarat AWG | 24 |
| Semakan artikel | 07 |
| Rintangan kabel | ≤ 80 mΩ/m |
| Bahan sentuh | CuZn |
| Jenis benang kepala | M12 |
| Kaedah sambungan | Individual wires |
| Soket kabel kepala | straight |
| Tork pengetatan | 3 Nm ... 4 Nm (Installation-side) |
| Bahan konduktor | Tin-plated Cu litz wires |
| Rintangan sentuhan | ≤ 3 mΩ |
| Arus nominal IN | 2 A |
| Voltan nominal UN | 30 V |
| Nota tentang operasi | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Wayar tunggal, warna | brown, blue, white, gray, pink, green, yellow, red |
| Keratan rentas kabel | 0.25 mm² |
| Tahap pencemaran | 3 |
| Bilangan jawatan | 8 |
| Voltan lonjakan yang dinilai | 0.8 kV |
| Voltan ujian, kabel | 3000 V AC (Spark test) |
| Tahap perlindungan | IP67 |
| Bilangan soket kabel | 1 |
| Kategori voltan lampau | II |
| Penamaan piawai | M12 connector |
| Rintangan penebat | ≥ 100 MΩ |
| Bahan badan cengkaman | Zinc die-cast, nickel-plated |
| Ketebalan, penebat | 0.21 mm (Core insulation) |
| Voltan nominal, kabel | 300 V |
| Keratan rentas konduktor | 0.25 mm² |
| Jenis sambungan kenalan | Pin |
| Bahan pembawa sentuh | PA 6.6 |
| Bahan permukaan sentuh | Ni/Au |
| Penebat dawai bahan | TPE |
| Piawaian/spesifikasi | IEC 61076-2-101 |
| Rintangan konduktor maksimum | 80 mΩ/m |
| Rintangan penebat kabel | ≥ 20 MΩ*km |
| Kitaran pemasukan/penarikan balik | > 100 |
| Bahan untuk sambungan skru | Zinc die-cast, nickel-plated |
| Diameter dawai termasuk penebat | 1.15 mm ±0.07 mm |
| Suhu ambien (operasi) | -40 °C ... 85 °C (cable, fixed installation) |
| Talian isyarat struktur konduktor | 14x 0.15 mm |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
Penerangan Produk
Conect. plug. to be apar. front wall, 8-pole, Male connector, straight, M12, coding: A, free cable end, Front mounting, Square flange, Single stranded wires, cable length: 0.5 m, 0.25 mm², TPE braided
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
