

| Parameter | Nilai |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Pengekodan | A |
| Dilindungi | no |
| Reka bentuk kepala | Pin |
| Nota keselamatan | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Jenis benang | M12 |
| Meterai hadir | no |
| Nota perhimpunan | 25 mm side length |
| Jenis pemasangan | Front mounting Square flange 25 mm side length |
| Paparan status | no |
| Semakan artikel | 02 |
| Jenis benang kepala | M12 |
| Kaedah sambungan | Crimp connection |
| Soket kabel kepala | straight |
| Rintangan sentuhan | ≤ 3 mΩ |
| Arus nominal IN | 4 A |
| Voltan nominal UN | 250 V |
| Nota tentang operasi | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Keratan rentas kabel | 0.34 mm² |
| Tahap pencemaran | 3 |
| Bilangan jawatan | 4 |
| Voltan lonjakan yang dinilai | 2.5 kV |
| Tahap perlindungan | IP67 |
| Bilangan soket kabel | 1 |
| Kategori voltan lampau | II |
| Penamaan piawai | M12 connector |
| Rintangan penebat | ≥ 100 MΩ |
| Paparan status hadir | No |
| Bahan pembawa sentuh | PA 6.6 |
| Piawaian/spesifikasi | IEC 61076-2-101 |
| Kitaran pemasukan/penarikan balik | > 100 |
| Suhu ambien (operasi) | -25 °C ... 85 °C (Plug / socket) |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi