Dalam Stok Produk Hangat
SACC-M12MSX-8CT-CL SH
SACC-M12MSX-8CT-CL SH 1422844 PHOENIX CONTACT Connector
$0.00USD
4497 dalam stok
Spesifikasi Utama
:4 Nm (Pressure nut with coupling sleeve)
Pengekodan:X
Panjang:43 mm
Jeneral:This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling)
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| 4 Nm (Pressure nut with coupling sleeve) | |
| Pengekodan | X |
| Panjang | 43 mm |
| Jeneral | This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling) |
| Dilindungi | yes |
| Permohonan | Data |
| Reka bentuk kepala | Plug |
| Jenis sensor | Ethernet |
| Soket kabel | straight |
| Jenis produk | Circular connector (cable-side) |
| Nota perhimpunan | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Bahan pengedap | FKM |
| Semakan artikel | 05 |
| Perumah berdiameter | 16 mm |
| Jenis benang kepala | M12 |
| Diameter luar | 6.5 mm ... 10 mm |
| Kaedah sambungan | Crimp connection |
| Soket kabel kepala | straight |
| Tork pengetatan | 0.4 Nm (M12 knurl) |
| Arus nominal IN | 0.5 A |
| Voltan nominal UN | 48 V AC |
| Tahap pencemaran | 3 |
| Lukisan dimensi | |
| Bilangan jawatan | 8 |
| Voltan lonjakan yang dinilai | 0.8 kV |
| Tahap perlindungan | IP65 |
| Bilangan soket kabel | 1 |
| Kategori voltan lampau | II |
| Jenis/kategori isyarat | Ethernet CAT6A(IEC 11801), 10 Gbps |
| Penamaan piawai | M12 connector |
| Rintangan penebat | ≥ 100 MΩ |
| Bahan badan cengkaman | Zinc die-cast, nickel-plated |
| Piawaian/peraturan | PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Saiz sepana, nat kesatuan | 15 mm |
| Keratan rentas sambungan | 0.14 mm² ... 0.34 mm² (flexible) |
| Bahan pembawa sentuh | PA 6.6 |
| Piawaian/spesifikasi | IEC 61076-2-109 |
| Saiz sepana, nat kaunter | 14 mm |
| Kitaran pemasukan/penarikan balik | ≥ 100 |
| Keratan rentas sambungan AWG | 26 ... 22 (flexible) |
| Bahan untuk sambungan skru | Zinc die-cast, tin-plated |
| Suhu ambien (pemasangan) | -5 °C ... 50 °C |
| Suhu ambien (operasi) | -40 °C ... 85 °C (Plug / socket) |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
| Panjang pelucutan wayar individu | 4 mm +0,5 mm |
| Warna Sentuhan (penentuan isyarat) Sentuhan (pilihan) | 1 = WHOG (D1+) |
Penerangan Produk
Data connectors, Ethernet CAT6A (10 GBit/s), PROFINET CAT6A (10 GBit/s), 8-pole, shielded, M12 straight male connector, X-coded, crimped connection, knurling material: Zinc die-cast, tin-plated, cable
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
