Dalam Stok Produk Hangat
SACC-M12MR-4CON-PG11-M PWR
SACC-M12MR-4CON-PG11-M PWR 1408990 PHOENIX CONTACT Power connectors
$0.00USD
4659 dalam stok
Spesifikasi Utama
:0.75 mm² ... 1.5 mm² (with ferrule)
Pengekodan:A
Panjang:44 mm
Jeneral:Strip 22 mm off the cable sheath, strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductor with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm.
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| 0.75 mm² ... 1.5 mm² (with ferrule) | |
| Pengekodan | A |
| Panjang | 44 mm |
| Jeneral | Strip 22 mm off the cable sheath, strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductor with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. |
| Dilindungi | no |
| Permohonan | Power supply |
| Reka bentuk kepala | Plug |
| Soket kabel | angled |
| Jenis produk | Circular connector (cable-side) |
| Nota perhimpunan | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Bahan pengedap | NBR |
| Semakan artikel | 00 |
| Bahan sentuh | CuZn |
| Perumah berdiameter | 20.2 mm |
| Jenis benang kepala | M12 |
| Diameter luar | 8 mm ... 10 mm |
| Kaedah sambungan | Screw connection |
| Soket kabel kepala | angled |
| Tork pengetatan | 0.4 Nm (M12 knurl) |
| Rintangan sentuhan | ≤ 3 mΩ |
| Arus nominal IN | 8 A (when using 1.5 mm² conductors) |
| Voltan nominal UN | 250 V AC |
| Tahap pencemaran | 3 |
| Lukisan dimensi | |
| Bilangan jawatan | 4 |
| Sambungan skru Pg | Pg11 |
| Voltan lonjakan yang dinilai | 2.5 kV |
| Tahap perlindungan | IP67 |
| Bilangan soket kabel | 1 |
| Kategori voltan lampau | II |
| Penamaan piawai | M12 connector |
| Rintangan penebat | > 10 GΩ |
| Bahan badan cengkaman | PA |
| Keratan rentas sambungan | 0.75 mm² ... 1.5 mm² (without ferrule) |
| Bahan pembawa sentuh | PA |
| Bahan permukaan sentuh | Ni/Au |
| Piawaian/spesifikasi | IEC 61076-2-101 |
| Kitaran pemasukan/penarikan balik | > 100 |
| Keratan rentas sambungan AWG | 18 ... 16 (without ferrule) |
| Bahan untuk sambungan skru | Zinc die-cast, nickel-plated |
| Suhu ambien (operasi) | -40 °C ... 85 °C (Plug / socket) |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
| Panjang pelucutan wayar individu | 5 mm |
Penerangan Produk
Power connector, 4-pole, M12 angled male connector, A-coded, Screw connection, knurling material: Zinc die-cast, nickel-plated, Pg11 cable gland, cable diameter 8 mm ... 10 mm
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
