

| Parameter | Nilai |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Nota | In line with |
| Pengekodan | S |
| Jeneral | Contact connection method: Crimp connection |
| Dilindungi | no |
| Jenis kabel | UL/cUL stranded hook-up wire |
| Reka bentuk kepala | Socket |
| Nota keselamatan | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Jenis sensor | Power |
| Jenis benang | M12 |
| Panjang kabel | 4.5 m |
| Bebas halogen | yes |
| Jenis produk | Circular connectors (device side) |
| Voltan ujian | 6 kV |
| Nota perhimpunan | With flat nut |
| Jenis pemasangan | Rear mounting M16 x 1.5 With flat nut |
| Bahan pengedap | FKM |
| Talian isyarat AWG | 16 |
| Semakan artikel | 07 |
| Bahan sentuh | CuZn |
| Rintangan api | in acc. to UL 1581 VW1 |
| Jenis benang kepala | M12 |
| Kaedah sambungan | Individual wires |
| Soket kabel kepala | straight |
| Tork pengetatan | 3 Nm ... 4 Nm (M12 connector) |
| Bahan konduktor | Bare Cu litz wires |
| Rintangan sentuhan | ≤ 3 mΩ |
| Arus nominal IN | 12 A |
| Voltan nominal UN | 630 V |
| Nota tentang operasi | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Maklumat pesanan: | Lock nut is included in the scope of delivery |
| Wayar tunggal, warna | black 1, black 2, black 3, green/yellow |
| Keratan rentas kabel | 1.31 mm² |
| Tahap pencemaran | 3 |
| Bilangan jawatan | 4 |
| Voltan lonjakan yang dinilai | 6 kV |
| Tahap perlindungan | IP67 |
| Bilangan soket kabel | 1 |
| Kategori voltan lampau | III |
| Jenis/kategori isyarat | Power |
| Penamaan piawai | M12 connector |
| Rintangan penebat | ≥ 100 MΩ |
| Keratan rentas konduktor | 1.31 mm² |
| Jenis sambungan kenalan | Socket |
| Bahan pembawa sentuh | PA |
| Bahan permukaan sentuh | Au |
| Penebat dawai bahan | mPPE |
| Piawaian/spesifikasi | IEC 61076-2-111 |
| Kitaran pemasukan/penarikan balik | > 100 |
| Bahan untuk sambungan skru | Zinc die-cast, nickel-plated |
| Diameter dawai termasuk penebat | 2.2 mm |
| Suhu ambien (operasi) | -40 °C ... 105 °C (cable, fixed installation) |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
| Voltan yang dinilai dalam acc. dengan IEC 61076-2-101 | 630 V |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi