

| Parameter | Nilai |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Pengekodan | A |
| Dilindungi | no |
| Jenis kabel | PVC litz wire |
| Reka bentuk kepala | Socket |
| Nota keselamatan | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Jenis sensor | Universal |
| Jenis benang | M12 |
| Panjang kabel | 0.5 m |
| Jenis produk | Circular connectors (device side) |
| Nota perhimpunan | With flat nut |
| Jenis pemasangan | Rear mounting Pg9 With flat nut |
| Bahan pengedap | FKM |
| Semakan artikel | 11 |
| Bahan sentuh | CuZn |
| Jenis benang kepala | M12 |
| Kaedah sambungan | Individual wires |
| Soket kabel kepala | straight |
| Jenis penguncian kepala | SPEEDCON |
| Tork pengetatan | 2 Nm ... 3 Nm (Installation-side) |
| Bahan konduktor | Tin-plated Cu litz wires |
| Arus nominal IN | 4 A |
| Voltan nominal UN | 60 V |
| Nota tentang operasi | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Maklumat pesanan: | Lock nut is included in the scope of delivery |
| Wayar tunggal, warna | black, brown,blue, white, gray |
| Keratan rentas kabel | 0.5 mm² |
| Tahap pencemaran | 3 |
| Bilangan jawatan | 5 |
| Tahap perlindungan | IP67 (When plugged in) |
| Bilangan soket kabel | 1 |
| Kategori voltan lampau | III |
| Jenis/kategori isyarat | Universal |
| Penamaan piawai | M12 connector |
| Keratan rentas konduktor | 0.5 mm² |
| Jenis sambungan kenalan | Socket |
| Bahan pembawa sentuh | PA 6.6 |
| Bahan permukaan sentuh | Au |
| Penebat dawai bahan | PVC |
| Piawaian/spesifikasi | IEC 61076-2-101 |
| Kitaran pemasukan/penarikan balik | > 100 |
| Bahan untuk sambungan skru | Zinc die-cast, nickel-plated |
| Diameter dawai termasuk penebat | 1.8 mm |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi