

| Parameter | Nilai |
|---|---|
| IP67, when in locked state | |
| Nota | Push-pull |
| Jeneral | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Bahan | Brass, nickel-plated |
| Reka bentuk kepala | Pin |
| Jenis benang | M12 |
| Jenis produk | Panel mounting base |
| Jenis pemasangan | Rear mounting |
| Bahan pengedap | FKM |
| Jenis benang kepala | M12 |
| Kaedah sambungan | SMD |
| Keratan rentas AWG | (converted acc. to IEC) |
| Jenis penguncian kepala | Push-Pull |
| Tahap perlindungan | IP67 (correctly plugged in and locked) |
| Penamaan piawai | M12 connector |
| Bahan badan cengkaman | Brass, nickel-plated |
| Piawaian/spesifikasi | IEC 61076-2-010 |
| Kitaran pemasukan/penarikan balik | > 100 |
| Bahan untuk sambungan skru | Brass, nickel-plated |
| Suhu ambien (operasi) | -40 °C ... 85 °C (without mechanical actuation) |
| Tahap perlindungan (apabila dipasang) | IP67 (correctly plugged in and locked) |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi