

| Parameter | Nilai |
|---|---|
| FKM | |
| Nota | In line with |
| Bahan | Zinc die-cast (nickel-plated) |
| Reka bentuk kepala | Socket |
| Jenis benang | M12 |
| Jenis produk | Panel mounting base |
| Nota perhimpunan | Spacing between the top edge of the PCB and the back of the front plate: 7 mm |
| Jenis pemasangan | Rear mounting M15 x 1 Spacing between the top edge of the PCB and the back of the front plate: 7 mm |
| Bahan pengedap | FKM |
| Semakan artikel | 05 |
| Jenis benang kepala | M12 |
| Kaedah sambungan | THR solder connection |
| Tork pengetatan | 1.5 ... 2 Nm |
| Nota tentang operasi | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Maklumat pesanan: | Lock nut is included in the scope of delivery |
| Tahap perlindungan | IP67 (correctly plugged in and locked) |
| Penamaan piawai | M12 connector |
| Piawaian/spesifikasi | IEC 61076-2-101 |
| Kitaran pemasukan/penarikan balik | > 100 |
| Bahan untuk sambungan skru | Zinc die-cast, nickel-plated |
| Suhu ambien (operasi) | -25 °C ... 85 °C (Plug / socket) |
| Tahap perlindungan (apabila dipasang) | IP67 (correctly plugged in and locked) |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi