

| Parameter | Nilai |
|---|---|
| Status display I/O Yellow LED | |
| LED | yes |
| Lebar | 54 mm |
| Pengekodan | A |
| Ketinggian | 19 mm |
| Panjang | 149 mm |
| Permohonan | Standard |
| Jenis produk | Header with metric measurement slots |
| Nota perhimpunan | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Bilangan slot | 8 |
| Bahan sentuh | Cu alloy |
| Perumahan Bahan | PBT |
| Kaedah sambungan | Pluggable screw connection |
| Diagnostik tempatan | Supply voltage Green LED |
| Fungsi yang dipantau | Supply voltage |
| Voltan nominal UN | 24 V DC |
| Lukisan dimensi | |
| Nota mengenai permohonan | Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
| Bilangan jawatan | 5 |
| Tahap perlindungan | IP65 |
| Arus yang dinilai, jumlah | 10 A |
| Bahan pengedap O-ring | NBR |
| Penamaan piawai | M12 connector |
| Perwakilan optik | Green LED |
| Paparan status hadir | Yes |
| Bahan pembawa sentuh | PA |
| Bahan permukaan sentuh | gold-plated |
| Bahan Sarung berulir | PBT |
| Piawaian/spesifikasi | IEC 61076-2-101 |
| Sebatian pengacuan bahan | PUR |
| Voltan operasi maksimum Umax | 30 V DC |
| Suhu ambien (operasi) | -25 °C ... 80 °C |
| Kapasiti bawaan semasa setiap slot | 4 A |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
| Bahan sentuhan, sisi kabel induk | CU alloy |
| Kapasiti bawaan arus maksimum setiap laluan | 2 A |
| Bahan permukaan sentuhan, sisi kabel induk | Sn |
| Bahan pembawa sentuhan pada bahagian kabel induk | PA |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi