

| Parameter | Nilai |
|---|---|
| Free from silicone and cadmium | |
| Nota | Due to the extremely robust outer sheath, this cable should only be stripped in 5 cm increments. |
| Jenis | Plug straight M12 |
| Pengekodan | A |
| Dilindungi | no |
| Jenis kabel | PUR, halogen-free, highly flexible, welding-sputter resistant, orange [810] |
| Permohonan | Robots and drag chains |
| Jenis pengekodan | A |
| Panjang kabel | 1 m |
| Bebas halogen | in accordance with DIN VDE 0472 part 815 |
| Jenis produk | Sensor/actuator cable |
| Gaya UL AWM | 20549 (80°C/300 V) |
| Keseluruhan kelainan | 5 wires around filler to the core |
| Bahan pengedap | NBR |
| Paparan status | 3 LEDs |
| Talian isyarat AWG | 22 |
| Bahan sentuh | CuSn |
| Rintangan api | in acc. with UL FT-2 |
| Rintangan lain | hydrolysis and microbe resistant |
| Bahan konduktor | Bare Cu litz wires |
| Arus nominal IN | 4 A |
| Voltan nominal UN | 24 V DC |
| Wayar tunggal, warna | brown, white, blue, black, green-yellow |
| Hartanah istimewa | Sheath resistant to welding beads, can be recycled, matt, without adhesion, wear-resistant, flame resistant and self-extinguishing |
| Tahap pencemaran | 3 |
| Lukisan dimensi | |
| Bilangan jawatan | 5 |
| Tahap perlindungan | IP65 |
| Bilangan soket kabel | 1 |
| Kategori voltan lampau | II |
| Penamaan piawai | M12 connector |
| Rintangan penebat | ≥ 100 MΩ |
| Bahan badan cengkaman | TPU, hardly inflammable, self-extinguishing |
| Sarung luaran, warna | orange RAL 2003 |
| Voltan nominal, kabel | 300 V (Peak value, not for high-power applications) |
| Sarung luar, bahan | PUR |
| Paparan status hadir | Yes |
| Teras/Teras voltan ujian | 3000 V (Spark test) |
| Keratan rentas konduktor | 5x 0.34 mm² |
| Diameter kabel luaran | 6.90 mm ±0.1 mm |
| Bahan pembawa sentuh | TPU GF |
| Bahan permukaan sentuh | Ni/Au |
| Penebat dawai bahan | PP |
| Piawaian/spesifikasi | IEC 61076-2-101 |
| Rintangan konduktor maksimum | approx. 57 Ω/km |
| Kitaran pemasukan/penarikan balik | ≥ 100 |
| Bahan untuk sambungan skru | Zinc die-cast, nickel-plated |
| Diameter dawai termasuk penebat | 1.55 mm ±0.05 mm (Signal line) |
| Suhu ambien (operasi) | -40 °C ... 80 °C (cable, fixed installation) |
| Talian isyarat struktur konduktor | 42x 0.10 mm |
| Kapasiti beban dinamik (lenturan) | Max. bending cycles: 5000000, Bending radius: 10 x D, Traversing path: 10 m, Traversing rate: 3 m/s, Acceleration: 10 m/s², Ambient temperature: ≤ 60 °C |
| Penarafan mudah terbakar mengikut UL 94 | HB |
| Jejari lenturan minimum, pemasangan tetap | 5 x D |
| Jejari lenturan terkecil, pemasangan tetap | 35 mm |
| Jejari lenturan minimum, pemasangan fleksibel | 10 x D |
| Jejari lenturan terkecil, pemasangan boleh alih | 69 mm |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi