Dalam Stok Produk Hangat
RBO 6
RBO 6 3075896 PHOENIX CONTACT Bolt connection terminal block
$2.32USD
4357 dalam stok
Spesifikasi Utama
:The rated insulation voltage applies to insulated cable lugs acc. DIN 46237:1970-07 and for uninsulated cable lugs acc. DIN 46234:1980-03 with shrink sleeve. When using uninsulated cable lugs with shrink sleeve the min. required air clearances and creepage distances have to be ensured by the enduser.
Nota:The rated insulation voltage applies to insulated cable lugs acc. DIN 46237:1970-07 and for uninsulated cable lugs acc. DIN 46234:1980-03 with shrink sleeve.
Warna:gray (RAL 7042)
Padang:17 mm
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| The rated insulation voltage applies to insulated cable lugs acc. DIN 46237:1970-07 and for uninsulated cable lugs acc. DIN 46234:1980-03 with shrink sleeve. When using uninsulated cable lugs with shrink sleeve the min. required air clearances and creepage distances have to be ensured by the enduser. | |
| Nota | The rated insulation voltage applies to insulated cable lugs acc. DIN 46237:1970-07 and for uninsulated cable lugs acc. DIN 46234:1980-03 with shrink sleeve. |
| Warna | gray (RAL 7042) |
| Padang | 17 mm |
| Lebar | 15 mm |
| Ketinggian | 80.8 mm |
| Keputusan | Test passed |
| Spektrum | Service life test category 2, bogie-mounted |
| Tahap ASD | 6.12 (m/s²)²/Hz |
| Kekerapan | f1= 5 Hz to f2= 250 Hz |
| Potensi | 1 |
| Bentuk denyutan nadi | Half-sine |
| Pecutan | 3.12g |
| Jenis produk | Bolt connection terminal block |
| Benang skru | M6 |
| Diameter bolt | 6 mm |
| Keratan rentas | 6 mm² ... 35 mm² |
| Diameter lubang | 6.5 mm |
| Jenis pemasangan | NS 35/7,5 |
| Spesifikasi | DIN EN 50155 (VDE 0115-200):2018-05 |
| Bilangan baris | 1 |
| Keluarga produk | RBO |
| Tempoh kejutan | 30 ms |
| Teks tambahan | only use with shrink sleeve |
| Kedalaman pada NS 32 | 54.8 mm |
| Lebar penutup hujung | 2.2 mm |
| Arus nominal | 125 A |
| Voltan nominal | 800 V |
| Buka panel sisi | No |
| Arahan ujian | X-, Y- and Z-axis |
| Semakan artikel | 01 |
| Panjang pelucutan | The stripping length depends on the specification provided by the cable lug manufacturer. |
| Masa pendedahan | 30 s |
| Tork pengetatan | 3.2 ... 3.7 Nm |
| Kedalaman pada NS 35/15 | 57.3 mm |
| Tahap pencemaran | 3 |
| Kedalaman pada NS 35/7,5 | 49.8 mm |
| Bahan penebat | PA |
| Bilangan jawatan | 1 |
| Voltan lonjakan yang dinilai | 8 kV |
| Titik set daya ujian | 10 N |
| Arus beban maksimum | 125 A (with 35 mm² conductor cross section) |
| Kategori voltan lampau | III |
| Keratan rentas nominal | 35 mm² |
| Bilangan sambungan | 2 |
| Titik set voltan ujian | 9.8 kV |
| Tempoh ujian setiap paksi | 5 h |
| Julat keratan rentas AWG | 10 ... 2 (converted acc. to IEC) |
| Rel DIN/sokongan penetapan | NS 32/NS 35 |
| Kumpulan bahan penebat | I |
| Suhu ambien (pemasangan) | -5 °C ... 70 °C |
| Bilangan kejutan setiap arah | 3 |
| Suhu ambien (pengaktifan) | -5 °C ... 70 °C |
| Suhu ambien (operasi) | -60 °C ... 110 °C (Operating temperature range incl. self-heating; for max. short-term operating temperature, see RTI Elec.) |
| Bilangan sambungan setiap tahap | 2 |
| Sambungan dalam akaun dengan standard | IEC 60947-7-1 |
| Kelembapan yang dibenarkan (operasi) | 20 % ... 90 % |
| Ujian kenaikan suhu keperluan | Increase in temperature ≤ 45 K |
| Arus tahan masa pendek 35 mm² | 4.2 kA |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
| Ketoksikan gas asap NFPA 130 (SMP 800C) | passed |
| Suhu ambien (penyimpanan/pengangkutan) | -25 °C ... 60 °C (for a short time, no longer than 24 h, -60°C to +70°C) |
| Kelembapan yang dibenarkan (penyimpanan/pengangkutan) | 30 % ... 70 % |
| Kemudahbakaran permukaan NFPA 130 (ASTM E 162) | passed |
| Warna pengenalan lug kabel cincin: biru | 2.5 mm² |
| Penggunaan bahan penebat statik dalam keadaan sejuk | -60 °C |
| Pelesapan kuasa maksimum untuk keadaan nominal | 4.06 W |
| Warna pengenalan lug kabel cincin: kuning | 6 mm² |
| Perlindungan kebakaran untuk kenderaan rel (DIN EN 45545-2) R22 | HL 1 - HL 3 |
| Perlindungan kebakaran untuk kenderaan rel (DIN EN 45545-2) R23 | HL 1 - HL 3 |
| Perlindungan kebakaran untuk kenderaan rel (DIN EN 45545-2) R24 | HL 1 - HL 3 |
| Perlindungan kebakaran untuk kenderaan rel (DIN EN 45545-2) R26 | HL 1 - HL 3 |
| Ketumpatan optik spesifik asap NFPA 130 (ASTM E 662) | passed |
| Indeks suhu bahan penebat relatif (Elec., UL 746 B) | 130 °C |
Penerangan Produk
Stud connection terminal, nominal voltage: 800 V, nominal current: 125 A, number of connections: 2, number of poles: 1, connection type: Stud connection, Dimensioning cross-section: 35 mm², mounting c
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
