Dalam Stok Produk Hangat
PTSA 0,5/12-2,5-F BU
PTSA 0,5/12-2,5-F BU 1092250 PHOENIX CONTACT Terminal for printed circuit board, nominal current: 2 A, step:..
$0.00USD
4336 dalam stok
Spesifikasi Utama
:0.2 mm² / flexible / > 10 N
Pautan:Push-in spring connection
Langkah:2.5 mm
nota:Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| 0.2 mm² / flexible / > 10 N | |
| Pautan | Push-in spring connection |
| Langkah | 2.5 mm |
| nota | Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201 |
| jenis | Block of terminal blocks for printed circuit boards |
| Keputusan | Test passed |
| Amplitud | 0.35 mm (10 Hz ... 60.1 Hz) |
| Kekerapan | 10 - 150 - 10 Hz |
| Pembungkusan | Packed in carton |
| Lebar [l] | 31.5 mm |
| Tinggi [t] | 16.7 mm |
| Panjang [l] | 12 mm |
| Susun Atur Pin | Linear Pinning |
| Saiz aci | 0.4 x 0.75 mm |
| Kelajuan Sapuan | 1 octave/min |
| Suhu | 850 °C |
| Pecutan | 5g (60.1 Hz ... 150 Hz) |
| Warna (Sarung) | Blue (5015) |
| Barisan Produk | COMBICON Terminals XS |
| Jenis Produk | PCB terminal block |
| Diameter lubang | 1 mm |
| Jenis pemasangan | Wave Soldering |
| Ulasan artikel | 00 |
| Bilangan baris | 1 |
| Keluarga Produk | PTSA 0.5 |
| Jarak Shank | 2.5 mm |
| Kemasan Permukaan | Hot-dip galvanizing |
| Bilangan tiang | 12 |
| Arahan Ujian | X, Y, and Z axis |
| Bahan Sentuh | Cu Alloy |
| Arus Terkadar IN | 2 A |
| Voltan dinilai PBB | 250 V |
| Spesifikasi Ujian | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| Lukisan Berdimensi | |
| Ketinggian Pemasangan | 13.1 mm |
| Bahan penebat | PA |
| Keratan rentas nominal | 0.5 mm² |
| Voltan saiz (II/2) | 320 V |
| Panjang Alur Kimpalan [P] | 3.6 mm |
| Voltan saiz (III/2) | 250 V |
| Voltan saiz (III/3) | 63 V |
| Tempoh ujian setiap gandar | 2.5 h |
| Tempoh permohonan | 5 s |
| Kumpulan Bahan Penebat | The |
| CTI mengikut IEC 60112 | 600 |
| Keratan rentas konduktor AWG | 24 ... 20 |
| Voltan Impuls Terkadar (II/2) | 2.5 kV |
| Nilai rayapan minimum (II/2) | 1.6 mm |
| Voltan impuls dinilai (III/2) | 2.5 kV |
| Voltan impuls dinilai (III/3) | 2.5 kV |
| Keratan rentas konduktor tegar | 0.14 mm² ... 0.5 mm² |
| Voltan Impuls Saiz (II/2) | 2.5 kV |
| Suhu ambien (pemasangan) | -5 °C ... 55 °C |
| Nilai rayapan minimum (III/2) | 1.5 mm |
| Nilai rayapan minimum (III/3) | 1.6 mm |
| Voltan Pengasingan Terkadar (II/2) | 320 V |
| Voltan Impuls Saiz (III/2) | 2.5 kV |
| Voltan impuls saiz (III/3) | 2.5 kV |
| Suhu ambien (operasi) | -40 °C ... 85 °C |
| Voltan Pengasingan Terkadar (III/2) | 250 V |
| Keratan rentas konduktor fleksibel | 0.2 mm² ... 0.5 mm² |
| Keperluan pengesahan pemanasan | The sum of the ambient temperature and the heating of the PCB terminal should not exceed the upper limit of the temperature. |
| Voltan penebat yang dinilai (III/3) | 63 V |
| Panjang bahagian yang hendak dilucutkan | 9 mm |
| Bilangan Pin Kimpalan setiap Potensi | 1 |
| Suhu ambien (penyimpanan/pengangkutan) | -40 °C ... 70 °C |
| Kelas kebolehbakaran mengikut UL 94 | V0 |
| Kelembapan relatif (pengangkutan dan penyimpanan) | 30 % ... 70 % |
| Kawasan Kimpalan Permukaan Logam (Lapisan Permukaan) | Tin (4 - 8 μm Sn) |
| Rintangan Penebat Antara Kutub Bersebelahan | > 5 MΩ |
| Permukaan Logam, Titik Sambungan (Lapisan Permukaan) | Tin (4 - 8 μm Sn) |
| Nilai rambat minimum - julat tidak homogen (II/2) | 1.5 mm |
| Nilai rambat minimum - julat tidak homogen (III/2) | 1.5 mm |
| Nilai pelepasan minimum - julat tidak homogen (III/3) | 1.5 mm |
| Rintangan terhadap arus permukaan (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Suhu ujian kekerasan Brinell mengikut EN 60695-10-2 | 125 °C |
| Suhu penyalaan filamen GWIT mengikut EN 60695-2-13 | 775 |
| Indeks mudah terbakar filamen GWFI mengikut EN 60695-2-12 | 850 |
| Keratan rentas konduktor/jenis konduktor/daya tegangan nilai nominal/nilai sebenar | 0.14 mm² / rigid / > 10 N |
Penerangan Produk
Terminal block for printed circuit board, nominal current: 2 A, nominal voltage (III/2): 250 V, nominal cross-section: 0.5 mm², number of rows: 1, number of poles per row: 12, article family: PTSA 0.5
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
