Dalam Stok Produk Hangat
PTFIX 2X1,5 TQ
PTFIX 2X1,5 TQ 1082538 PHOENIX CONTACT Block for distribution, Terminal base, rated voltage: 450 V, rated cu..
$0.00USD
4527 dalam stok
Spesifikasi Utama
:Depending on the application case and mechanical load, other arrangements of the mounting accessory can also be chosen.
Nota:When aligning several blocks, the foot elements should be placed in a way that maximum 2 blocks are free-hanging in between. Flange elements should be placed after every 9 blocks and with engagement pins after every 12 blocks.
Warna:pastel turquoise (RAL 6034)
Kedalaman:17.7 mm
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Depending on the application case and mechanical load, other arrangements of the mounting accessory can also be chosen. | |
| Nota | When aligning several blocks, the foot elements should be placed in a way that maximum 2 blocks are free-hanging in between. Flange elements should be placed after every 9 blocks and with engagement pins after every 12 blocks. |
| Warna | pastel turquoise (RAL 6034) |
| Kedalaman | 17.7 mm |
| Lebar | 4.2 mm |
| Ketinggian | 21.6 mm |
| Keputusan | Test passed |
| Spektrum | Service life test category 2, bogie-mounted |
| Tahap ASD | 6.12 (m/s²)²/Hz |
| Kekerapan | f1= 5 Hz to f2= 250 Hz |
| Potensi | 1 |
| Bentuk denyutan nadi | Half-sine |
| Revolusi | 135 |
| Pecutan | 3.12g |
| Jenis produk | Distributor terminal block |
| Jenis pemasangan | for snapping onto a DIN rail adapter |
| Spesifikasi | DIN EN 50155 (VDE 0115-200):2018-05 |
| Bilangan baris | 1 |
| Kelajuan putaran | 10 rpm |
| Tempoh kejutan | 18 ms |
| Arus nominal | 17.5 A |
| Voltan nominal | 450 V |
| Buka panel sisi | No |
| Arahan ujian | X-, Y- and Z-axis |
| Semakan artikel | 01 |
| Panjang pelucutan | 8 mm ... 10 mm |
| Masa pendedahan | 30 s |
| Keratan rentas AWG | 26 ... 14 (converted acc. to IEC) |
| Kitaran suhu | 192 |
| Tahap pencemaran | 3 |
| Bahan penebat | PA |
| Voltan lonjakan yang dinilai | 6 kV |
| Titik set daya ujian | 1 N |
| Arus beban maksimum | 21 A (with a 2.5 mm² conductor cross section) |
| Kategori voltan lampau | III |
| Arus keseluruhan maksimum | 21 A |
| Keratan rentas nominal | 1.5 mm² |
| Bilangan sambungan | 2 |
| Titik set voltan ujian | 7.3 kV |
| Tempoh ujian setiap paksi | 5 h |
| Rel DIN/sokongan penetapan | NS 35/NS 15 |
| Keratan rentas dinilai AWG | 14 |
| Kumpulan bahan penebat | I |
| Tolok silinder dalaman | A1 / B1 |
| Keratan rentas konduktor tegar | 0.14 mm² ... 2.5 mm² |
| Suhu ambien (pemasangan) | -5 °C ... 70 °C |
| Keratan rentas/berat konduktor | 0.14 mm² / 0.2 kg |
| Bilangan kejutan setiap arah | 3 |
| Suhu ambien (pengaktifan) | -5 °C ... 70 °C |
| Suhu ambien (operasi) | -60 °C ... 110 °C (Operating temperature range incl. self-heating; for max. short-term operating temperature, see RTI Elec.) |
| Bilangan sambungan setiap tahap | 2 |
| Keratan rentas konduktor fleksibel | 0.14 mm² ... 1.5 mm² |
| Sambungan dalam akaun dengan standard | IEC 60998-2-2 |
| Kelembapan yang dibenarkan (operasi) | 20 % ... 90 % |
| Ujian kenaikan suhu keperluan | Increase in temperature ≤ 45 K |
| Keratan rentas konduktor, tegar [AWG] | 26 ... 14 (converted acc. to IEC) |
| Arus tahan masa pendek 1.5 mm² | 0.18 kA |
| Arus tahan masa pendek 2.5 mm² | 0.3 kA |
| Penarafan mudah terbakar mengikut UL 94 | V0 |
| Ketoksikan gas asap NFPA 130 (SMP 800C) | passed |
| Suhu ambien (penyimpanan/pengangkutan) | -25 °C ... 60 °C (for a short time, no longer than 24 h, -60°C to +70°C) |
| Keratan rentas konduktor, fleksibel [AWG] | 26 ... 16 (converted acc. to IEC) |
| Kelembapan yang dibenarkan (penyimpanan/pengangkutan) | 30 % ... 70 % |
| Kemudahbakaran permukaan NFPA 130 (ASTM E 162) | passed |
| Penggunaan bahan penebat statik dalam keadaan sejuk | -60 °C |
| Pelesapan kuasa maksimum untuk keadaan nominal | 0.56 W |
| Perlindungan kebakaran untuk kenderaan rel (DIN EN 45545-2) R22 | HL 1 - HL 3 |
| Perlindungan kebakaran untuk kenderaan rel (DIN EN 45545-2) R23 | HL 1 - HL 3 |
| Perlindungan kebakaran untuk kenderaan rel (DIN EN 45545-2) R24 | HL 1 - HL 3 |
| Perlindungan kebakaran untuk kenderaan rel (DIN EN 45545-2) R26 | HL 1 - HL 3 |
| Ketumpatan optik spesifik asap NFPA 130 (ASTM E 662) | passed |
| Keratan rentas konduktor fleksibel (ferrule dengan sarung plastik) | 0.14 mm² ... 1.5 mm² |
| Indeks suhu bahan penebat relatif (Elec., UL 746 B) | 130 °C |
| Keratan rentas konduktor fleksibel (ferrule tanpa sarung plastik) | 0.14 mm² ... 1.5 mm² |
Penerangan Produk
Distribution block, Base terminal, nominal voltage: 450 V, nominal current: 17.5 A, number of connections: 2, connection type: Push-in connection, cross-section: 0.14 mm² - 2.5 mm², mounting type: int
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
