

| Parameter | Nilai |
|---|---|
| Light grid | |
| Nota | via the PSR-TBUS DIN rail connector |
| Kedalaman | 113.6 mm |
| Kejutan | 10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction) |
| Lebar | 22.61 mm |
| Ketinggian | 107.74 mm |
| Voltan | 24 V DC (via A1) |
| boleh pasang | yes |
| Antaramuka | DIN rail TBUS for connection to the master module, not supplied as standard |
| Permohonan | Emergency stop |
| Sijil | XXX |
| Penamaan | A1/A2 |
| Masa penapis | typ. 5 ms (in the event of voltage dips at Us) |
| Denyutan ujian | < 235 µs (Test pulse width of low test pulses) |
| Panjang kabel | max. 100 m |
| Jenis produk | Safety device |
| Masa mula semula | min. 5 s (Boot time) |
| Jenis pemasangan | DIN rail mounting |
| Masa tindak balas | see user manual |
| Pengenalpastian | CE-compliant |
| Arus masuk | 9.16 A (Δt = 0.5 ms at Us) |
| Voltan keluaran | < 0.3 V (Low state) |
| Paparan status | 1 x LED (green), 1 x LED (orange), 1 x LED (blue) |
| Arus kebocoran | < 500 µA (Low state) |
| Petunjuk ralat | 2 x LED (red) |
| Bahan perumahan | Polyamide PA non-reinforced |
| Ketinggian maksimum | ≤ 2000 m (Above sea level) |
| Bilangan input | 8 |
| Panjang pelucutan | 10 mm |
| Kaedah sambungan | Push-in connection |
| Kedudukan pemasangan | vertical or horizontal |
| Bilangan output | 4 |
| Huraian output | Safety-related digital outputs |
| Litar pelindung | Serial protection against polarity reversal |
| Penggunaan semasa | typ. 3.7 mA (typically with US) |
| Litar pelepasan | Yes, internal |
| Beban induktif maksimum | See "Protective circuit" |
| Frekuensi penukaran | max. 1/4 x tCycle[Hz] |
| Tahap perlindungan | IP20 |
| Beban kapasitif maksimum | max. 820 nF |
| Arahan pemasangan | Observe derating |
| Bilangan sambungan | 1 |
| Getaran (operasi) | 10 Hz ... 150 Hz, 2g |
| Arus masuk maksimum | 1.1 A (Δt = 3 s at Us) |
| Mod operasi nominal | 100% operating factor |
| Voltan keluaran nominal | 24 V DC (Supply via A1) |
| Tahap prestasi (PL) | e (2-channel wiring) |
| Penggunaan kuasa di AS | typ. 1.32 W (Outputs inactive) |
| Penerangan tentang input | Safety-related digital inputs |
| Voltan penebat yang dinilai | 250 V AC |
| Perlindungan litar pintas | no |
| Paparan voltan operasi | 1 x green LED |
| Keratan rentas konduktor AWG | 24 ... 16 |
| Mengehadkan arus berterusan | 400 mA (per channel) |
| Julat voltan keluaran nominal | 18.6 V DC ... 28.2 V DC (US- 0,7 V) |
| Tahap Integriti Keselamatan (SIL) | 3 |
| Keratan rentas konduktor tegar | 0.2 mm² ... 2.5 mm² |
| Isyarat "0" julat arus input | < 0.2 mA |
| Isyarat julat voltan input "0" | 0 V DC ... 5 V DC (for safe Off) |
| Isyarat julat voltan input "1" | 11 V DC ... 28.8 V DC |
| Voltan/penebat lonjakan yang dinilai | See section “Insulation coordination” |
| Suhu ambien (operasi) | -10 °C ... 70 °C (observe derating) |
| Arus bekalan kawalan dinilai IS | typ. 55 mA (Outputs inactive) |
| Keratan rentas konduktor fleksibel | 0.2 mm² ... 2.5 mm² |
| Voltan keluaran apabila dimatikan | max. 0.1 V |
| Suhu ambien (penyimpanan/pengangkutan) | -20 °C ... 85 °C |
| Voltan bekalan litar kawalan dinilai AS | 19.2 V DC ... 28.8 V DC |
| Tahap perlindungan minimum lokasi tetap | IP54 |
| Kelembapan maksimum yang dibenarkan (penyimpanan/pengangkutan) | 95 % (non-condensing) |
| Rintangan konduktor keseluruhan maksimum yang dibenarkan | max. 1.2 kΩ (Input and reset circuit at US) |
| Kelembapan relatif maksimum yang dibenarkan (operasi) | 95 % (non-condensing) |
| Pelesapan kuasa maksimum untuk keadaan nominal | 7.48 W (with max. permissible load) |
Spesifikasi teknikal dan data prestasi
Panduan pemasangan dan operasi