Dalam Stok Produk Hangat
PS-EE-2G/1AC/24DC/120W/SC
PS-EE-2G/1AC/24DC/120W/SC 1234302 PHOENIX CONTACT Primary switching power supplies, ESSENTIAL POWER, Screw c..
$62.13USD
193 dalam stok
Spesifikasi Utama
:100 V AC ... 109 V AC -15 % ... +10 % (PN= 100 W)
Masa:24000 h
Warna:green
Kedalaman:125 mm
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| 100 V AC ... 109 V AC -15 % ... +10 % (PN= 100 W) | |
| Masa | 24000 h |
| Warna | green |
| Kedalaman | 125 mm |
| Input | 4 kV (Test Level 4 - asymmetrical) |
| Lebar | 40 mm |
| tegar | 0.5 mm² ... 2.5 mm² |
| Ketinggian | 124 mm |
| Keluaran | 2 kV (Test Level 3 - asymmetrical) |
| Semasa | 5 A |
| LED mati | Supply voltage input AC not present (Off) |
| Voltan | 10 V (Test Level 3) |
| Komen | Criterion A |
| Fungsi | Visual operating state display |
| Kedudukan | 1.x |
| fleksibel | 0.5 mm² ... 2.5 mm² |
| Kekerapan | 50 Hz |
| Masa naik | < 2 s (UOut= 10 % ... 90 %) |
| EN 61010-1 | II (≤ 3000 m) |
| Kecekapan | typ. 87 % (120 V AC) |
| Kriteria A | Normal operating behavior within the specified limits. |
| Kriteria B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Suhu | 40 °C |
| Penurunan voltan | 70 % |
| tegar (AWG) | 20 ... 14 (Cu) |
| Faktor puncak | typ. 1.5 (120 V AC) |
| Versi hud | Stainless steel |
| Input/Output | asymmetrical |
| Jenis produk | Power supply |
| Jenis pemasangan | DIN rail mounting |
| Kalis tanpa beban | yes |
| Kelas iklim | 3K22 (in accordance with EN 60721-3-3) |
| Pengenalpastian | 1.1 (), 1.2 (L), 1.3 (N) |
| Arus masuk | typ. 43 A (at 25 °C) |
| Pelepasan hingar | EN 55016 |
| Keluarga produk | ESSENTIAL POWER |
| Masa menghidupkan | typ. 1 s |
| Teks tambahan | 120 V AC |
| Julat frekuensi | 0 kHz ... 2 kHz |
| Riak sisa | typ. 70 mVPP(with nominal values) |
| Pelepasan di udara | 8 kV (Test Level 3) |
| Bahan perumahan | Metal |
| Ketinggian maksimum | ≤ 5000 m (> 2000 m, Derating: 10 %/1000 m) |
| Bilangan fasa | 1.00 |
| Kelas perlindungan | I |
| Panjang pelucutan | 6.5 mm |
| Kaedah sambungan | Screw connection |
| Pelepasan sentuhan | 6 kV (Test Level 3) |
| Penyimpangan kawalan | < 2 % (change in load, static 10 % ... 90 %) |
| Fius utama peranti | 3.15 A internal (device protection), fast-blow |
| Kedudukan pemasangan | horizontal DIN rail NS 35, EN 60715 |
| Bilangan tempoh | 25 periods |
| Kuasa output (PN) | 120 W (240 V AC) |
| Kejutan (pembedahan) | 15 ms, 15 g, per spatial direction (IEC 60068-2-27) |
| Tork pengetatan | 0.5 Nm ... 0.6 Nm |
| Litar pelindung | Transient protection; Varistor |
| Jenis-jenis isyarat | LED DC OK – signal state operation (UN= 24 V DC, IOut= IN) |
| Penggunaan semasa | max. 2 A (120 W) |
| Tahap pencemaran | 2 |
| Bahan selak kaki | Sheet steel, zinc-plated |
| Julat voltan input | 110 V AC ... 240 V AC ±10 % (PN= 120 W) |
| Kalis litar pintas | yes |
| Kekuatan medan ujian | 10 V/m (Test Level 3) |
| Sambungan secara siri | yes, for increased output voltage |
| Tahap perlindungan | IP20 |
| Julat frekuensi (fN) | 50 Hz ... 60 Hz ±10 % |
| Masa penimbal utama | typ. 15 ms (120 V AC) |
| Versi elemen sampingan | Aluminum |
| Penamaan piawai | Electrical safety |
| Arahan pemasangan | alignable: 0 mm horizontally, 30 mm vertically |
| Kepala skru bentuk pemacu | Slotted L |
| Pelepasan gangguan | Interference emission in accordance with EN 61000-6-3 (residential and commercial) and EN 61000-6-4 (industrial) |
| LED menyala (hijau), DC OK | UOUT> 15 V (On (green), DC OK) |
| Arahan Voltan Rendah | Conformance with Low Voltage Directive 2014/35/EC |
| Piawaian/peraturan | EN 61000-3-2 |
| Getaran (operasi) | 10 Hz ... 50 Hz, amplitude ±0.2 mm |
| Sambungan secara selari | yes, for increasing power and redundancy with diode |
| Voltan keluaran nominal | 24 V DC |
| Arus nyahcas ke PE | < 3.5 mA |
| MTBF (Telcordia SR-332) | > 2470000 h (25 °C) |
| Dengan lapisan pelindung | No |
| Pelepasan hingar yang dialirkan | EN 55016 |
| Piawaian/spesifikasi | IEC 61010-2-201 (SELV) |
| Perlindungan fius bersepadu | no |
| Rintangan voltan maklum balas | ≤ 35 V DC |
| Julat voltan input nominal | 100 V AC ... 240 V AC |
| Arus keluaran nominal (IN) | max. 5 A (PN= 120 W) |
| Konfigurasi sistem bekalan | TN, TT, IT (PE) |
| Beban nominal kehilangan kuasa maksimum. | < 16 W (230 V AC) |
| Keserasian elektromagnetik | Conformance with EMC Directive 2014/30/EU |
| Kamiran arus masuk (I2t) | typ. 0.7 A2s |
| Input voltan penebat / PE | 3.5 kV AC (type test) |
| Voltan grid kebangsaan biasa | 120 V AC |
| Jenis voltan bekalan | AC |
| Suhu ambien (operasi) | -20 °C ... 70 °C (Derating >45°C: 2.5%/K) |
| Input/output voltan penebat | 4 kV AC (type test) |
| Jarak pemasangan kanan/kiri | 10 mm / 10 mm |
| Jarak pemasangan atas/bawah | 30 mm / 30 mm |
| Pelesapan kuasa tanpa beban maksimum | < 1 W (230 V AC) |
| Pelesapan kuasa tanpa beban minimum | < 1 W (120 V AC) |
| Keperluan EMC untuk imuniti hingar | EN 61000-6-2 |
| Pelesapan kuasa beban nominal minimum | < 20 W (120 V AC) |
| Suhu ambien (penyimpanan/pengangkutan) | -40 °C ... 85 °C |
| Pemutus yang disyorkan untuk perlindungan input | 10 A ... 16 A (Characteristic B, C, D, K or comparable) |
| fleksibel dengan ferrule dengan sarung plastik | 0.5 mm² ... 2.5 mm² |
| Julat tetapan voltan keluaran (USet) | 24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted) |
| fleksibel dengan ferrule tanpa sarung plastik | 0.5 mm² ... 2.5 mm² |
| Kelembapan relatif maksimum yang dibenarkan (operasi) | ≤ 95 % (at 25 °C, non-condensing) |
| Perlindungan terhadap voltan lampau pada output (OVP) | ≤ 35 V DC |
Penerangan Produk
Primary Switching Power Supplies, ESSENTIAL POWER, Screw Connection, Rail Mount, Output: 24 VDC / 5 A
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
