PM-10-3.3

10W Output Switching Power supply PM-10series 10W Output Switching Power supply PM-10series10W Output Switching Power supply PM-10series SPECIFICATION SPECIFICATIONSPECIFICATION MODEL MODELMODELPM-10-3.3 PM-10-3.3PM-10-3.3 Features : Features :Features : Universal AC input / Full range Universal AC input / Full rangeUniversal AC input / Full range Protections: short circuit / Overload/ Over voltage Protections: short circuit / Overload/ Over voltageProtections: short circuit / Overload/ Over voltage Ultra-mini size, light weight Ultra-mini size, light weightUltra-mini size, light weight Cooling by free air convection Cooling by free air convectionCooling by free air convection Insulation class Insulation classInsulation class Medical safety approved (2 x MOPPbetweenprimaryto secondary) Medical safety approved (2 x MOPPbetweenprimaryto secondary)Medical safety approved (2 x MOPPbetweenprimaryto secondary) Do not load powerconsumptione0.5w Do not load powerconsumptione0.5wDo not load powerconsumptione0.5w 100% full load burn-in test 100% full load burn-in test100% full load burn-in test Fixed switchingfrequencyat 67KHz Fixed switchingfrequencyat 67KHzFixed switchingfrequencyat 67KHz High reliability High reliabilityHigh reliability Suitable for BF application with appropriate systemconsideration Suitable for BF application with appropriate systemconsiderationSuitable for BF application with appropriate systemconsideration 3 years warranty 3 years warranty3 years warrantyPM-10-5 PM-10-12-10-15-10-24 PM-10-5 PM-10-12-10-15-10-24PM-10-5 PM-10-12-10-15-10-24THE DC VOLTAGE THE DC VOLTAGETHE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RATED CURRENT CURRENT RANGE RATED POWERRATED CURRENT CURRENT RANGE RATED POWER 3.3 V 3.3 V3.3 V 2.5 to 2.5 to2.5 to 0 ~ 2.5 a 0 ~ 2.5 a0 ~ 2.5 a 8.25 W 8.25 W8.25 W 5V 5V5V 2A 2A2A 0 ~ 2A 0 ~ 2A0 ~ 2A 10W 10W10W 12V 15V 24V 12V 15V 24V12V 15V 24V 0.85A0.67A0.42A 0.85A0.67A0.42A0.85A0.67A0.42A 0 ~ 0.85A0 ~ 0.67A0 ~ 0.42 A 0 ~ 0.85A0 ~ 0.67A0 ~ 0.42 A0 ~ 0.85A0 ~ 0.67A0 ~ 0.42 A 10.2 W 10.05 W 10.08 W 10.2 W 10.05 W 10.08 W10.2 W 10.05 W 10.08 WOUTPUT OUTPUTOUTPUT RIPPLE & NOISE (max.) Note.2150mVp-p RIPPLE & NOISE (max.) Note.2150mVp-pRIPPLE & NOISE (max.) Note.2150mVp-p VOLTAGE TOLERANCE Note.33.0% VOLTAGE TOLERANCE Note.33.0%VOLTAGE TOLERANCE Note.33.0% 150mVp-p 150mVp-p150mVp-p 2.0% 2.0%2.0% 150mVp-p150mVp-p240mVp-p 150mVp-p150mVp-p240mVp-p150mVp-p150mVp-p240mVp-p 2.0%2.0%2.0% 2.0%2.0%2.0%2.0%2.0%2.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATIONLINE REGULATION LOAD REGULATION 1.0% 1.0%1.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% 0.5% 0.5%0.5% 1.0% 1.0%1.0% 0.5% 0.5%0.5% 1.0% 1.0%1.0% 0.5% 0.5%0.5% 0.5% 0.5%0.5% SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGESETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE FREQUENCY RANGEFREQUENCY RANGE 1800ms, 20ms/230VAC 1800ms, 20ms/115VAC at full load 1800ms, 20ms/230VAC 1800ms, 20ms/115VAC at full load1800ms, 20ms/230VAC 1800ms, 20ms/115VAC at full load 100ms/230VAC24ms/115VAC at full load 100ms/230VAC24ms/115VAC at full load100ms/230VAC24ms/115VAC at full load 85 ~ 264VAC120 ~ 370VDC 85 ~ 264VAC120 ~ 370VDC85 ~ 264VAC120 ~ 370VDC 47 ~ 440Hz 47 ~ 440Hz47 ~ 440HzINPUT INPUTINPUT EFFICIENCY (Typ.) EFFICIENCY (Typ.)EFFICIENCY (Typ.) 66% 66%66% 74% 74%74% 78% 78%78% 79% 79%79% 79% 79%79% AC CURRENT (Typ.) AC CURRENT (Typ.)AC CURRENT (Typ.) INRUSH CURRENT (Typ.) INRUSH CURRENT (Typ.)INRUSH CURRENT (Typ.) 0.25/115VAC0.15A/230VAC 0.25/115VAC0.15A/230VAC0.25/115VAC0.15A/230VAC COLD START 25A/115VAC 45A/230VAC COLD START 25A/115VAC 45A/230VACCOLD START 25A/115VAC 45A/230VAC LEAKAGE CURRENT Note.5 Touch current < 80 a/264VAC Above 105% rated output power LEAKAGE CURRENT Note.5 Touch current < 80 a/264VAC Above 105% rated output powerLEAKAGE CURRENT Note.5 Touch current < 80 a/264VAC Above 105% rated output power The OVERHEAD of The OVERHEAD ofThe OVERHEAD of Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removedProtection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION PROTECTIONPROTECTION 3.8 ~ 4.95 V 3.8 ~ 4.95 V3.8 ~ 4.95 V 5.75 ~ 6.75 V 5.75 ~ 6.75 V5.75 ~ 6.75 V 13.8 ~ 16.2 V 13.8 ~ 16.2 V13.8 ~ 16.2 V 17.25 ~ 20.25 V 17.25 ~ 20.25 V17.25 ~ 20.25 V 27.6 ~ 32.4 V 27.6 ~ 32.4 V27.6 ~ 32.4 V ENVIRONMENT ENVIRONMENTENVIRONMENT OVER VOLTAGE OVER VOLTAGEOVER VOLTAGEWORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATIONWORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDSSAFETY STANDARDS Protection type : Shut off o/p voltage, clamping by zener diode Protection type : Shut off o/p voltage, clamping by zener diodeProtection type : Shut off o/p voltage, clamping by zener diode -20 ~ +70c (Refer to "Reduction Curve") -20 ~ +70c (Refer to "Reduction Curve")-20 ~ +70c (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH -40 ~ +85℃, 10 ~ 95% RH-40 ~ +85℃, 10 ~ 95% RH 0.03%/c (0 ~ 50 ° c) 0.03%/c (0 ~ 50 ° c)0.03%/c (0 ~ 50 ° c) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approvedANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved ISOLATION LEVELPrimary-Secondary: 2xMOPP ISOLATION LEVELPrimary-Secondary: 2xMOPPISOLATION LEVELPrimary-Secondary: 2xMOPP SAFETY AND EMC SAFETY AND EMCSAFETY AND EMC (Note 4) (Note 4)(Note 4)OTHER OTHEROTHER VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSIONVOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSIONEMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGINGPACKAGING I/P-O/P:4KVAC I/P-O/P:4KVACI/P-O/P:4KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH I/P-O/P:100M Ohms / 500VDC / 25 / 70% RHI/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55011(CISPR11),EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN55011(CISPR11),EN55022 (CISPR22) Class B, EN61000-3-2,-3Compliance to EN55011(CISPR11),EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria ACompliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A 723.2 Khrs min.MIL-HDBK-217F (25c) 723.2 Khrs min.MIL-HDBK-217F (25c)723.2 Khrs min.MIL-HDBK-217F (25c) 70*50*22.7 mm (L*W*H) 70*50*22.7 mm (L*W*H)70*50*22.7 mm (L*W*H) 0.105 Kg; 120pcs/13.6 Kg/0.97 CUFT 0.105 Kg; 120pcs/13.6 Kg/0.97 CUFT0.105 Kg; 120pcs/13.6 Kg/0.97 CUFTNOTE NOTENOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. EMC directives.EMC directives. 5. Touch currentwas measured from the main entrance to the DC output. 5. Touch currentwas measured from the main entrance to the DC output.5. Touch currentwas measured from the main entrance to the DC output.File name:PM-10-SPEC2014-12-09 File name:PM-10-SPEC2014-12-09File name:PM-10-SPEC2014-12-09