Dalam Stok Produk Hangat
PC 6/ 2-ST-BUS-7,62
PC 6/ 2-ST-BUS-7,62 1044740 PHOENIX CONTACT Connector for printed circuit board, nominal current: 32 A, numb..
$0.00USD
3865 dalam stok
Spesifikasi Utama
Pautan:Insulation displacement connection
Langkah:7.62 mm
nota:Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201
Keputusan:Test passed
Maklumat Pembekal
Produk: 0
Biasanya dihantar dalam 2-3 hari bekerja
Kualiti Dijamin
Penghantaran Pantas
Sokongan Teknikal
Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Pautan | Insulation displacement connection |
| Langkah | 7.62 mm |
| nota | Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201 |
| Keputusan | Test passed |
| Amplitud | 0.35 mm (10 Hz ... 60.1 Hz) |
| Kekerapan | 10 - 150 - 10 Hz |
| Pembungkusan | Packed in carton |
| Lebar [l] | 24.4 mm |
| Tinggi [t] | 58 mm |
| Panjang [l] | 28.75 mm |
| Kelajuan Sapuan | 1 octave/min |
| Suhu | 850 °C |
| Pecutan | 50 m/s² (60.1 Hz ... 150 Hz) |
| Warna (Sarung) | Green (6021) |
| Barisan Produk | COMBICON Connectors L |
| Jenis Produk | Printed circuit board connector |
| Jenis Pengapit | absent |
| Bebibir penetapan | absent |
| Ulasan artikel | 02 |
| Bilangan baris | 1 |
| Keluarga Produk | PC 6/.. -ST-BUS |
| Kemasan Permukaan | Hot-dip galvanizing |
| Bilangan tiang | 2 |
| Arahan Ujian | X, Y, and Z axis |
| Sistem penyambung | COMBICON PC 6 |
| Bahan Sentuh | Cu Alloy |
| Voltan AC tetap | 4.26 kV |
| Kerintangan Jisim | 0.7 mΩ |
| Bilangan kitaran | 25 |
| Arus Terkadar IN | 32 A |
| Voltan dinilai PBB | 1000 V |
| Tork pengetatan | 3 Nm |
| Kitaran manuver | 25 |
| Nota untuk Operasi | According to DIN EN 61984, COMBICON connectors are connectors without switchable power (COC). For use in accordance with the intended use, they must not be switched on or disconnected while they are still live or under load. |
| Spesifikasi Ujian | DIN EN 60998-2-3 (VDE 0613-2-3):2005-03 |
| Lukisan Berdimensi | |
| Bahan penebat | PA |
| Kerintangan Jisim R1 | 0.7 mΩ |
| Kerintangan Jisim R2 | 0.7 mΩ |
| Bilangan potensi | 2 |
| Keratan rentas nominal | 16 mm² |
| Bilangan sambungan | 2 |
| Voltan saiz (II/2) | 1000 V |
| Warna (Elemen Pemacu) | Orange (2003) |
| Bilangan tiang yang diuji | 3 |
| Voltan saiz (III/2) | 1000 V |
| Voltan saiz (III/3) | 1000 V |
| Tempoh ujian setiap gandar | 2.5 h |
| Jenis Sambungan Hubungi | female |
| Tempoh permohonan | 5 s |
| Tekanan akibat kakisan | 0.2 dm3KNOW2on 300 dm3/40 °C/1 cycle |
| Kepala skru jenis perkakas | Torx® (T15) |
| Kumpulan Bahan Penebat | The |
| CTI mengikut IEC 60112 | 600 |
| Voltan Impuls Terkadar (II/2) | 6 kV |
| Nilai rayapan minimum (II/2) | 5.5 mm |
| Voltan impuls dinilai (III/2) | 8 kV |
| Voltan impuls dinilai (III/3) | 8 kV |
| Voltan Impuls Saiz (II/2) | 6 kV |
| Suhu ambien (pemasangan) | -5 °C ... 40 °C (depending on conductor insulation) |
| Nilai rayapan minimum (III/2) | 8 mm |
| Nilai rayapan minimum (III/3) | 12.5 mm |
| Voltan Pengasingan Terkadar (II/2) | 1000 V |
| Voltan Impuls Saiz (III/2) | 8 kV |
| Voltan impuls saiz (III/3) | 8 kV |
| Daya tegangan setiap kutub lebih kurang. | 16 N |
| Suhu ambien (operasi) | -40 °C ... 100 °C (depending on derating curve) |
| Voltan Pengasingan Terkadar (III/2) | 1000 V |
| Keratan rentas konduktor fleksibel | 16 mm² (H07V-K / Maximum Outer Diameter 8.1 mm) |
| Daya sisipan setiap tiang lebih kurang. | 13 N |
| Voltan penebat yang dinilai (III/3) | 1000 V |
| Tekanan akibat kesan haba | 100 °C/168 h |
| Arah sambungan konduktor/papan | 0 ° |
| Suhu ambien (penyimpanan/pengangkutan) | -40 °C ... 70 °C |
| Kelas kebolehbakaran mengikut UL 94 | V0 |
| Tegangan impuls menegak di atas paras laut | 9.8 kV |
| Kelembapan relatif (pengangkutan dan penyimpanan) | 30 % ... 70 % |
| Zon sentuhan permukaan logam (lapisan permukaan) | Tin (4 - 8 μm Sn) |
| Rintangan Penebat Antara Kutub Bersebelahan | > 5 MΩ |
| Permukaan Logam, Titik Sambungan (Lapisan Permukaan) | Tin (4 - 8 μm Sn) |
| Nilai rambat minimum - julat tidak homogen (II/2) | 5.5 mm |
| Nilai rambat minimum - julat tidak homogen (III/2) | 8 mm |
| Nilai pelepasan minimum - julat tidak homogen (III/3) | 8 mm |
| Rintangan terhadap arus permukaan (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Suhu ujian kekerasan Brinell mengikut EN 60695-10-2 | 125 °C |
| Suhu penyalaan filamen GWIT mengikut EN 60695-2-13 | 775 |
| Indeks mudah terbakar filamen GWFI mengikut EN 60695-2-12 | 850 |
| Keratan rentas konduktor/jenis konduktor/daya tegangan nilai nominal/nilai sebenar | 16 mm² / flexible / > 100 N |
Penerangan Produk
Connector for printed circuit board, nominal section: 16 mm², color: green, nominal current: 32 A, nominal voltage (III/2): 1000 V, contact surface: Tin, contact type: Female, number of potentials: 2,
Ciri-ciri Utama
- Kualiti gred industri
- Patuh RoHS
- Sijil CE
- Jaminan 1 tahun
Dokumen Produk
Lembaran Data
Spesifikasi teknikal dan data prestasi
Manual Pengguna
Panduan pemasangan dan operasi
